MX922 software for scanner problem

Similar Questions

• HP Photosmart software for scanner Scanjet G4010

  I upgraded my computer to an HP Pavilion with Windows 7 64-bit OS.  I have a disc for the HP Photosmart software for my Scanjet G4010 but it is Version 9.0 for Windows Vista.  Where can I get a copy of this set of programs for Windows 7 that I can install it.

  Hello RichardM02

  The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.
  
  You will find the Board Commercial Scanner here.
  http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418

• Need driver for scanner Canoscan flatbed

  Need software for SCANNER Canoscan N1220OU this device is about 4 - 5 years

  You must download the appropriate drivers/software on Canons site for your specific version of Windows 32/64-bit.
  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_80

  I hope this helps.

• There was a problem downloading the software for the iPhone error - 39

  My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

  There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

  Make sure that your network settings are correct and your network connection is active. or try again later.

  Hi mgdabko!

  I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

  If you see an error when you update or restore your iPhone, iPad, or iPod

  Thank you for using communities of Apple Support.

  See you soon!

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• How can I download the right software for my new epson perfection scanner?

  How can I download the right software for my new epson perfection 1250 scanner?  I have already downloaded TWAIN driver but that does not seem to do.  He came with a disc, I got from the thrift store.  Thank you Lydia

  Monday, February 27, 2012, 21:57:09 + 0000, lydia111111 wrote:

  How can I download the right software for my new epson perfection 1250 scanner?  I have already downloaded TWAIN driver but that does not seem to do.  He came with a disc, I got from the thrift store.

  Go to the Epson website and find the Epson perfection 1250 for
  your version of Windows. I don't know if it exists or not, but if
  for this, you will find it here.

  Whenever you switch to a new version of Windows, you must install
  drivers (software that interfaces between the hardware and)
  Windows) for printers, scanners, video cards, etc., which have been
  written for this new version of Windows.  And also note that you need
  different determinants for a 32-bit version of Windows and a 64-bit
  Version.

  It is the manufacturer of the hardware to write and
  available to download these drivers. Especially if your hardware is
  older, it is quite possible that the manufacturer has decided that it is not
  a value of his time and effort to develop drivers for the hardware that it is
  selling more.
  Check with the manufacturer or on their web site to see if a pilot
  There are. If it, download and install it. If it isn't, you're out
  lucky. Also consult their websites in other countries, if there is
  None; Sometimes you can find the driver you need in this way.

  In the future, before making such an upgrade, make sure you have
  done the appropriate research to find out what drivers do not exist,
  and so what equipment you need to replace if you upgrade.

  Ken Blake, Microsoft MVP

• HP officejet 9120 (all-in-one) does not No Scanner for driver problem.

   

  Mr. President is respected!

   

  I have a portable printer Hp officejet 9120 (all-in-one), but no scanner to work here for driver problem. I downloaded the driver from the Hp site, but not here.not updated driver does work on XP, win 7 please help me in this matter.

   

   

   

  Thank you

  (Munir Malik)

  Pakistan

  [email protected]

   

   

  Hello

  You might have more luck on the bussines forum, this is the forum of consumer and your unit is regarded as a bussiness unit, so bussiness forum could be a place where you get a better answer.
  Find it with the link below.

  http://h30499.www3.HP.com/

• Repair of software for the companion Xperia problem

  Hello

  It's Sam from INDIA. I waited the MM Z3 Compact (D5833) update for some time. But since he did not appear for the India (to show), I flashed my phone with firmware Australia MM generic. Everything was looking good until I am facing a problem and decided to return to the pacifier. Since there is no update MM in India, I suppose that if I fix my software using Xperia companion it will take me back to the firmware generic lollipop India.

  But to my surprise after repairing the SW, it's always the same (generic Australia MM). Is there something wrong with the repair software companion Xperia? Thoughts?

  KR

  Sagar

  Hello

  Xperia companion checks what software currently installed on your phone and then install the latest version of this software when you perform a repair of software update. If you have installed the software for another country by using a third-party tool to 3:rd, this will very likely do Xperia companion use the software for this country, now as he sees that the software when it checks your phone. Xperia companion does not support the move to a version of the software for anther country so that don't you not able to restore the firmware for the India using Xperia companion I'm afraid.

• There was a problem downloading the software for the iPhone. The network connection timed out.

  Original title:
  Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network
  -----

  My computer can not down load the version the most recent for my I Phone it says:

  There was a problem downloading the software for the iPhone. The network connection timed out.

  Make sure your network settings are correct and your connection is active network, or try again later.
  IM Online hole time and ive tried for months

  Hello

  ·         What software you want to download?

  ·         You have an earlier version of the software installed on your computer?

  Method 1:

  Try to download the software by disabling add-ons: http://windows.microsoft.com/en-us/Windows-vista/How-do-browser-add-ons-affect-my-computer

  Method2:

  Try disabling the anti-virus and then check if you can download the program.

  NOTE: make sure that you enable the antivirus protection as soon as the diagnosis is completed.

  Method3:

  Reset Internet Explorer, and then try to download the file: http://windows.microsoft.com/en-US/windows-vista/Reset-Internet-Explorer-7-settings

  NOTE: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  You can also post your questions on the apple forum by clicking this link: https://discussions.apple.com/community/iphone/using_iphone

• Passport for blackBerry how to solve the problem when reloading software for Passport suddenly stops

  I met the problem with reloading the software for my passport, no matter how many times I tried with PC or Mac, it stops abruptly during the process. One has an idea to tackle if? Thank you!

  Hello and welcome to the community!

  No error message? Nothing at all?

  And you do that through LINK?

  Therefore, here are some recommendations:

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Unofficial methods, which are cleaner and allow you to choose any version of the OS you want, including older versions (if those who prove to be more stable for you) as well as those who may be your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know (and confirm) your BBID powers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Software for 2540 all-in-one installation problem

  Try to install the s/w for the all in one 2540 on an asus laptop running windows 8.1 64 bit. I get the error message c:\program 5 HP HP desk jet 2540 series\driverstore\yeti\hpvyt11.tnf install a driver package caller must be a member of the management group to install a driver package. As I am the only user on the laptop the full administrator rights so I do not understand what is happening

  Hi @Fish66,

  Welcome to the HP Forums!

  I see that you have a problem installing the software for your HP Deskjet 2540 on your Windows 8.1. I'm happy to help with this installation problem!

  To get help, I'll have to know the following:

  • If the printer is connected, wireless, or USB.
  • If the printer is able to make copies. Copy the text or mixed Documents.

  In the meantime, try the following:

  • Uninstall the software. Uninstalling the printer software. (In case it has been partially installed).
  • Clean boot the computer. How to perform a boot in Windows.
  • Re-install with the HP printer install wizard for Windows.

  Hope this helps, and hope to hear from you soon!

• OfficeJet 4500 g 510g - m: Officejet 4500 g 510g - m software for Mac

  I need to know if there is software for the MAC computer.  Just bought the MAC and this is my first one so really unaware of things like that.  If someone can point me in the right direction, I would appreciate it, of course!

  Thank you very much!

  Hi @CatLady5,

  According to the document following the Officejet 4500 G510 is compatible with Mac 10.11, but there is no comprehensive software features and driver: Printers HP - OS X v10.11 v10.10 compatible printers.

  I think that you will also find the FAQ section in the document above useful. There are useful links to help you install and use the printer with Mac 10.11. Here's an overview of what you'll find:

  Install print driver Mac and the best available software using Apple Software Update.

  Go to the installation of a printer driver Mac using Apple software update. This method of download includes the HP printer driver. Function of your printer, the download may also include the HP scanner software utility or driver fax HP.

  What happens to my print driver, when I switch to El Capitan and Yosemite?

  If you had the full features printing software installed on your Mac with the Mavericks, so everything should work the same as it did before you upgrade to El Capitan and Yosemite.

  If you went to El Capitan and Yosemite for an operating system prior to the Mavericks, and there is not a complete driver of features available to El Capitan and Yosemite, how you print remains the same, but you may have to analyze in a different way. For more information on scanning without full functionality driver, go to How to scan without software HP in OS X v10.11 El Capitan and OS X v10.10 Yosemite.

  What happens if my printer does not work as expected after the upgrade to El Capitan and Yosemite?

  If your printer is affected by print, connection, or scanning problems or an error message is displayed after the upgrade to El Capitan or Yosemite, go to HP support page, enter your printer model, then search the document on printing, connection or the analysis of issues, or for the error message that appears.

  Is there a driver package or third party for my printer software?

  Gutenprint (formerly Gimp-Print) provides basic print drivers open source for many printers who otherwise would not be supported in Mac OS X. To see if your printer is supported, go to the Gutenprint drivers for more information.

  NOTE: Gutenprint drivers don't are not supported by HP or Apple.

  If it meets your needs, please click Accept button Solution below to identify your problem as solved!

  If you need help, let me know and I'll happily at all that I can to help. Thank you.

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi