My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

Similar Questions

• Windows 7 does not recognize my 3 Seagate external drives but is very good with Western Digital and other sticks USB Flash. Windows Vista will see them.

  My apologies if this is a query repeatedly, but I can't find a job anywhere and he leads me into the wall.

  I have 3 external Seagate hard drives. All 3 range from about 3 years 11 months old, 1 TB - 3 TB of capacity, and I use them all from time to time to back up my media. In the past months, my Dell XPS ceased to recognize them, 95% of the time. Sometimes they will be Plug and Play and be fine, but otherwise the result when I plug them is coming the power light and the whirring disc fortunately but nothing on the laptop. They recognized themselves on my other machines running Vista. All other Flash memory devices are very good.

  I also have a hard drive Western Digital external powered, almost identical, that Plug and play every time.

  I tried all my ports and various cables and adapters. I tried them on other machines and they are very good, it seems to be just with my Dell and the Seagates. It recognizes everything that I plug in there from the iPhone to Flash Drives. It has all the latest drivers and Windows updates.

  When they're not working, they do not appear in the devices, disk management, Explorer or UVCView Manager. When they do, all settings appear to be well. My laptop runs Windows 7 Edition Home Premium with Service Pack 1.

  I assigned each their own letter drive, disabled power management and they are not protected by Word. The drivers are the standard Windows ones, because these devices do not use their own. I have the latest chipset drivers, everything works perfectly and is completely up to date.

  When I run UVCView (when one of them does not work), it is said there is an error autour MaxPacketSize, current externally is set to 9 and it said "ERROR: low peripheral speed require bMaxPacketSize0 = 8" branded error. I don't know if this is a factor? This may explain why it's slower transfer data to my machine that has USB3.0 it does on another machine, it begins at 130 MB/s and falls to 30 in 10 seconds.

  I tried all combinations of power off.

  I activated the network detection.

  I uninstalled all the USB in the Device Manager and reinstalled after the start.

  All 3 discs work instantly in my older Vista laptop runing.

  I am a loss to understand. I'm pulling my hair out and I don't have a lot to lose these days! There must be a setting in my computer or on the Seagates but I checked all the usual places and some of the more irritable areas.

  Thank you in advance.

  I'm surprised that the removal of the INFCACHE did not work.  Readers (all external references in fact) were cut at the time, right?  With a reboot after and before you plug anything back?
   
  These instructions really come down to:
   
  Unplug all USB devices other than the keyboard and mouse
  Open C:\Windows\System32\DriverStore
  INFCACHE.1 and rename it INFCACHE.old
  Restart the computer
  Reconnect it (one at a time) each USB device - giving the system about 30 seconds per device to 'catch up '.
   
  If you got on the rest as well your system files are good to go.

• My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive?

  My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.

  Hello

  What program are you using to burn CDs?

  Follow the steps in the link below and check:

  http://support.Microsoft.com/kb/324129

  It will be useful.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  What device?

  It appears in the Windows Device Manager?

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Why won't my Windows Media Player rip the CD more? Play selections from the library, but does not recognize the CD in the drive to rip.

  Help, please! I've been rip CDs to the library and everything was fine. Then I put a cd in and I could hear this spin and charge but then... nothing. He said "not responding" in the taskbar above, next to windows media player.
  I closed and reopened it. Different CD. Same thing. I restarted the computer. Once again, an another CD.but the same thing.
  It plays all the songs that are in my library but when I'm in the "rip" tab, there is a message saying to start, "insert a CD into the CD drive. I do and as before, I can hear it spin and charge, but the window of windows media player does not recognize that there is a CD in the drive. In the upper right corner is corner it say 'disc (E)' is this a hardware problem or software? Please help me to solve it!

  http://support.Microsoft.com/GP/mats#tab2
   
  Has a troubleshooting guide automated for you.
   
  --
  ..
  --
  "dee4156" wrote in message news: bc5b21d1-9fa9-48f9-a84a-eb439997ea79...
  > Please help! I've been rip CDs to the library and everything was fine.
  > Then I put a cd in and I could hear this spin and charge but then... nothing.
  > In the taskbar above, he said "no answer" next to windows media
  > player.
  > I closed and reopened it. Different CD. Same thing. I restarted the
  > computer. Once again, an another CD.but the same thing.
  > It plays all the songs that are in my library but when I'm in the "rip".
  > tab, there is a message saying to start, "insert a CD into the CD drive.
  > I do and as before, I can hear it spin and charge but windows support
  > the player window does not recognize that there is a CD in the drive. In the
  > top right corner, it says 'No disc (E)' is this a software or
  > hardware problem? Please help me to solve it!
   
   

• Acer Aspire 5517 does not recognize the DVD in the drive

  I just bought this new laptop last night. The DVD player does not recognize any DVD or CD placed in the tray. All if the player starts but nothing appears on the monitor. I have the auto-play configured to recognize any software install cd/dvd.

  http://support.Acer.com/

  As it is new, it is under warranty.

  Contact Acer A.S.A.P. > and make a claim.

  See you soon. Mick Murphy - Microsoft partner

• computer does not recognize a dvd in the drive

  Hello

  My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

  Thank you very much

  PAM

  Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

• Vista does not recognize my edge diskGo flash drive. __

  I just got a new computer with Vista and when I placed my edge deskGo into the USB, my computer does not recognize my backup file on this subject.  He considers that this is on A floppy drive and I don't even have a floppy drive.  I can't see all of the files on my disk.  I think that the diskGo is configured to be compatible with XP but not Vista.  This would be the case?  If so, how can I fix it?  Thank you

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  If they do not have a solution, you will need to buy a new one.

  See you soon. Mick Murphy - Microsoft partner

• I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can I have cs4 for r

  I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can get cs4 to read the raw file?

  Hi diggoman,

  Greetings.

  • Camera raw 9.1 is not compatible with 4 CS of PS.
  • This camera is too recent for your PS CS 4

  Your options if you want to open raw files-

  • Purchase PS CS 6
  • Or go to subscription with PS CC 2015, where you will also have access to the PS CS 6

  Concerning

  Rohit

• Pavilion FX285AV dvd5: Hp Pavilion dv5 FX285AV does not recognize the DVD in the drive

  My cd/dvd RW drive + will recognize and play CDs of music in Windows Media Player, it will recognize the DVD as if a cd of music but will not play and has the error message that there is not enough memory. In HP Media Smart DVD it opens and turns and then said: "no disc inserted in the drive."   Troubleshooting all said that the drive works very well. Y at - it a fix for this problem? How would I know if it's a damaged optical disc?

  Hi bcwain,

  I've done some additional research not enough memory error you receive and found something for you to try. Try the best answer to this Yahoo Answers link.

  If this does not work try using VLC Player, it is a free media player and open source. I use it on my XP machine at home that some videos have had a problem with playing on Windows Media Player. You can download it here.

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards