my 27 Imac late 2009 became very slow

Similar Questions

• Can I put a Seagate FireCuda drive in my iMac late 2009?

  Apple Hardware Test (AHT) says that my SATA drive, 1 TB in size, has a problem.  Nothing specific indicated. The code given is: 4HDD/11 / 40000000:SATA (0,0)

  I was testing because of the prob trying to get a good download of macOS Sierra.  Looks like I need to replace a hard drive first.  I have an iMac late 2009 with a Core i7 quad core, 16 GB DDR3 1067 Mhz ram and ATI Radeon HD 4850 graphics card.  I can put a SSD in this unit or am I stuck with the Barracuda drives.  I'm looking for FireCuda readers and like what I see and read about them.

  If you want an SSD, then I highly recommend:

  • Samsung 840.
  • OCZ ARC100 and other models.
  • OWC 3 G SSD.

  The foregoing is all compatible and should work well. Your model only supports SATA 3 Gb/s speeds due to the controller, so don't waste your money on more expensive discs of 6 G or 6 Gbps because they work faster than a car of 3 G. If you decide on a 6 GB drive, however, they must be compatible as they work on the slower bus of 3G.

• IMac late 2009 - 5 yellow bars on the screen - sometimes...

  Hi all..

  I recently bought an iMac late 2009 really nice second hand.  It worked wonderfully for a few weeks and I was about to become a mac convert.

  All of a sudden things have changed.  I pulled to the top of the machine first thing the morning only be greeted with lines to the bottom of the screen and a stall on a white screen.  The next day, it worked fine for a while.  Then the problem comes back for an hour or two.  Then back to yellow bars.

  I pulled up to my PC and started researching and found suggestions that this could be a graphics card problem.  After some time of reading and discovery, I pulled the top of AHT, and he advised me that there is actually a problem with the machine, and it's a sensor on the HARD drive.  Then, I would expect an additional error that could somehow link to the screen and absolutely nothing.

  Now, I know that historically the 27-inch late 2009 iMac screen / GPU has been examined by several different sites and forums but it is now an old machine and I don't know what to do.  What is a HARD drive failure?  Seems very unlikely but the only error listed... The flaw is GPU displayed on AHT down?  If this graphics card has received a "reformatting of oven" at a given time in its life and Ive been sold a dunce?

  Any advice would be great.  I don't have an Apple store near me and I don't know if they would even look at a machine this old.

  Help, please... My brief relationship was positive that ended quickly in tears!

  Alan

  Take it to an Apple authorized Service provider in your area, click on to start Apple authorized Service Provider Locator to find one near you.

• What is the size of the Philips screwdriver I use to open the locations of memory on my iMac late 2009?

  What is the size of the Philips screwdriver I use to open the locations of memory on my iMac late 2009?

  I already bought three different sizes at random and none works... I live in Germany and I need size in German units (if it is different from the United States).

  Thank you thank you a lot for your help!

  Philips #2.

• Mid-2009 MBP memory is compatible with the iMac late 2009?

  Hello

  I just upgraded the memory for my MacBook Pro (from 2 X 2 GB 2 X 4 GB)... I was going to sell the used memory space but realized that I might be able to add to my iMac late 2009.  How will I know if it's compatible?  Currently the iMac only has 4 GB as 2 units but is expandable to 16 GB and has 4 slots available.

  Forward a response and thanks in advance.

  J

  Hi OhThatGirl, you can use theCrucial memory Advisor for this.

• The use of several screens with the iMac (late 2009)

  Despite a few good support here to support the communities I'm unfortunately still not able to use my 2 Macs the best average.

  When you use the 'Cmd F2' keys on the main iMac everything seems ok, but the iMac display is at the head and

  When I press Cmd-F2 on the iMac screen only the bottum menu bar appears...

  Anyone know what are the exact steps to follow?

  What to start first?

  Thank you!

  I'm confused as to why you started another thread. Your original-> thread screen connect 2 iMac (late 2009) with mini DisplayPort

• iMac (late 2009) 27-inch vertical streak on the right side

  iMac (late 2009) 27-inch vertical streak on the right side. Oddly enough it is still there even on the gray splash screen. How much is it? I tried restarts it, Vpram etc, but still there. Always in the same place. Is a graphics card out or the display itself. Should I make an appointment with an Apple Retail Store?

  Strange, strange! This mysterious line disappeared miraculously se today!

  I am delighted, but at a loss for why it appeared and why he disappeared.

  The only idea I have is THAT HEAT could have something to do with it.

  I look forward to any comments on this mystery.

• iMac (late 2009) as screen for Mac Mini

  Hi, I want to buy a new Mac Mini, and I want to use my iMac (late 2009) as screen. I want to know if it is posible, and, if so, what cable do I need to buy

  Only if it's the 27-inch model. See the following for use of the cable. It is a cable mini displayport to mini displayport.

  Use your iMac as a display with the target - Apple Support Display Mode

• Mac became very slow viruses

  Top of desktop Mac became very slow all of a sudden. Could there be any virus. How do I solve the problem

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• my computer became very slow, but it shows no virus. Videos don't is not good and updated loading in service is very slow?

  My computer became very slow and takes forever to start up. I ran a diognostic on it and he registered all those sites that open at startup, but I don't know which I need and those who didn't. In addition, do not load my videos, they stop and start!

  Hello

  1 are there any changes made recently to the computer?

  2. What is the security software installed on the computer?

  3. What are the steps that you have already tried?

  Follow the steps in this article.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  I hope this helps.

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• iMac became very slow and unresponsive

  Hello

  I have an iMac which, in the last two days, suddenly became unusably slow. Almost every click brings up the spinning beachball even just after a reboot. iTunes cannot play a melody without pausing every minute or two. Same Safari is really slow, so I have still not tried more demanding such as Lightroom.

  Its an iMac mid 2010, 8 GB RAM, 1 TB HD with 305 GB free. Im running El captain, 10.11.6

  Any ideas what could be causing this or what I could do to remedy the situation? IM thinking I have to go through the pain of wiping the hard drive and reinstall everything. But I'd really rather avoid because I was planning on getting a new iMac when they release then them and I don't want to go through all that process again.

  I hope someone has an idea of something I could try before doing this?

  Thank you.

  Andy

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Mac Mini became very slow all of a sudden

  This morning, my Mac Mini became very, very slow. It's a 2009 with 4 GB of RAM and hdd 120Gb standard.

  I run with a keyboard and bluetooth mouse and due to its slowness, I wanted to run the hardware test to see what was wrong. (As is always the original HARD disk, I am wary of its remaining life expectancy). However, everything I try, I can't start anything on the mini as a normal reboot. If I have D, hold down option-D, hold SHIFT to safe mode, nothing seems to influence his start-up.

  Any thoughts? And also, suggestions of things to check?

  Run > Etrecheck.com and post back here with the results.