My 4300 Officejet prints very slowly.

My officejet 4300 print s very slowly. It will be printed in the first half at normal speeds then slows down the way for the second half. I use Vista. I turned it off and unplugged the printer and the computer and waited for an hour. When I started, I still had the same problem. This just started today. Thanks for your help.

Hello

I woulc check inks then firstly check the connection. How do you connect your printer?

Kind regards.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

    OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

    Take a look at this link.

  • I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

    I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

    Hi Dee,

    Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

    Good luck!

    Kosh

  • 7851D HPF: HPF 7851D prints very slowly (see docs swiped photos)

    Hi my printer recently started printing very slowly. Its as if she "sees" the word documents, PDF etc. because it they are pictures. I can't see anything in the properties to change that.

    What I think happened recently is I upgraded from Windows 8 to 10.

    Any help would be great.

    Thank you

    I recommend removing your current driver and by downloading and installing the latest driver from hp.com.

    I recommend you find the driver on hp.com before you remove the existing driver.

  • Printers HP f380 print very slowly

    If anyone can help me with this I would appreciate it a lot. I have a Hp f380 printer the following problems:

    the paper appears empty even though there is paper

    the ink light flashes even if I just loaded a n ew cartridge

    It prints very slowly: about one minute per page

    I tried to install the print and scan of the doctor and the crashes of the program before it finishes scanning for products every time I run as administrator

    I tried to unplug the printer

    I tried to uninstall and reinstall the printer

    the problem persists

    again any help would be welcome

    replacement of the ink cartridge after the printer unplugged for a while seems to have solved all the problems.

  • 6500 prints very slowly or failure to print over wireless

    I have the 6500 has more and he rarely printed wireless correctly with multiple laptops.

    Print a line at a time, very slowly, stops with the reported connection loss.  Corrupt characters are printed on the top of the page.  More likely to have problems with the larger print jobs.

    Impeccable with USB.

    Measures taken;

    1) changed its wireless phone system

    (2) changed linksys router Belkin (wireless network is impeccable with performance of broadband for all other devices, btw)

    (3) now use USB without problem

    (4) software up to date.

    (5) wireless report looks very good.

    However, I would like to reuse the wireless.  Please guide me towards a solution.

    Thank you

    Peter

    PS: Device Info:

    Product name HP Officejet 6500 E710n-z product model product CN557A serial number {removed from Privacy} Service ID 22028 Firmware Version CIP1FN1206AR Total Page count 3106 country Canada

    Well, go figure.  Because the printer has been moved, it has worked perfectly!

    Maybe it's a fault ranging/timing as opposed to a question of signal strength?  The intensity of the signal was 3 or 4 before the move.

    In any case, consider printing wireless solved my problems.

    Thanks Rana.  Out of box thinking was a good!

    See you soon,.

    Peter

  • PSC 1210: PSC 1210 print very slowly

    Printer prints very, very slowly.
    Self-test page took 96 seconds.
    Test printing to HP PS RD took 05:34.
    I've tried everything recommended on the support site.

    In addition, with the regular docs (Word or PDF) it will print 1st page very well,

    then slow down waaaaay.

    The next page will take more than 10 minutes and out very light.

    I am convinced that it is not a problem of ink that I just replaced both cartridges.

    Thanks for any advice you have.

    The printer made a tape from the printhead, then pause for about 15 seconds before the next swath?  This is probably caused by the failure of one of your cartridges. I don't remember if the PSC 1210 supports printing with a single cartrdige, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  • PSC 2175 printing very slowly

    Hello

    My HP psc 2175 all-in-one suddenly started printing very very slowly.

    No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened.

    Any clue?

    Thnks.

    Hello Soldadoryan, there are a few reasons for this. In simple terms, it could be due to the age of printers and use. Maybe this isn't the case in this case, however.

    Power supply from the printer is connected directly to a wall or connected by a surge protector? Visitors are often surprised the difference in performance when they connect the power supply directly into a wall socket because our printers have built in surge protector.

    After to change that, I would recommend checking and updating the firmware of the printer if necessary. The document here will guide you through this just to solve this problem.

    I hope this helps!

  • Problems of printer error says "failed to print" but it prints very slowly

    My printer is acting like it is on a network, unable to print error message, but it prints very very slow. Also 1 document says waiting for the authorized user? I am the authorized user. What's up with that? It all started after an update Microsoft, any help is appreciated printer is HP all drivers have been updated

    How is the printer connected?

    • Open Printers and faxes, click the printer icon and select Properties
    • Click on the Ports tab
    • Describe the entries for 'Port', 'Description' and 'Printer' in the (verified) highlighted line in the list of ports but DO NOT CLICK ANYWHERE in THE LIST
    • More than one box is checked?
    • Click CANCEL to exit the printer properties dialog box

    If you have a network, what is the brand and model of the router?

  • Printers Epson print very slowly in Windows 7

    Hello

    very very slow printing and print spooler

    All of a sudden, I'm practically impossible to print on one of my 2 printers epson (R260 and R1800).    By hitting print (or ctrl-p) in any application (Adobe CS4, or MS Office, Internet Explorer or Firefox), it takes between 2 and 5 minutes to the next printer dialog box upward and so much time to print striking impression.

    I removed the printer and re-installed new epson drivers, and I also did several selective startups and clean boots, none of these help.   The printer is connected directly to the computer via usb.  When all printers are removed and only MS xps document writer, and fax are listed, the dialog boxes find instantly, but as soon as I re - install any printer, it crashes.   I also re-installed Windows 7 (as an upgrade), and stopped and restarted print spooler, but that has not changed anything.

    Any help would be greatly appreciated, it drives me crazy...

    Thank you

    André

    I have an Epson SX405 and it was made slower and slower since I was a Windows 7 laptop.

    Finally discovered (a trick on another help site) the AUD in C:\ProgramData\Epson\PRINTER file. The more it grows, it gets the slower.

    So just delete this file. The driver will create an another next after printing, but nice and small.

    After that, keep him from time to time, delete before it happens basically again.

    I hope this works for you...

  • Printer print very slowly

    I am running Windows 7 with an old one Printer.Scanner.Copier of all-in-One HP F380

    The driver seems to be incompatible with Windows 7, the scanner never worked, but printing has been authorized in the past 5 months. Suddenly printing became very very slow (about 4 minutes for 1 page). What has gone wrong? Help, please.

    Hi Carl,

    HP F380 all-in-one printer is compatible with Windows 7. Click here to check the same.

    I suggest you follow these methods and check if it helps.

    Method 1: Install the latest drivers from the following link.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1128296#

    Method 2: Solve common problems by using the tools of diagnosis HP for Windows

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03292149&CC=US&DLC=en&LC=en&os=4062&Product=1128296&sw_lang=

    For more information, see the link:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Please post back with the results and we will be happy to help you further.

  • HP 5550dn printing VERY slowly?

    I print an issue of the magazine with my HP 5550dn. There is a very long delay between the printing of pages (minutes maybe two or three) and the display shows "Job Processing". When I was printing yesterday and this morning, he was not doing this. Certainly, it's not a feeling of speed, but I was getting on seven pages (11 x 17) a minute earlier. Now, there are these long breaks between printing. Any ideas?

    I don't know that I'm getting low on toner but I don't know why it would affect the speed of the printer. I restarted the printer a couple of times, shed jobs, etc.

    Any help would be greatly appreciated!

    I understand the problem... I got aquite a few photos on the page which have been very low, so I don't think they would cause a problem, but the number of photos it would slow down.

  • HP 6500 is printing very slowly under OS x 10.9

    Hey, my 6500 has prints incredibly slow and it recently started really only questions. I suspect it was the update to 10.9, but am not sure. I can't find anywhere on the hp software to reduce the quality or speed of prints any longer. It's quite frustrating because it takes about 2 minutes to print a page now since the Mac and about 5 seconds of my PC.

    Anyone have any ideas?

    You always have HP software from a previous version of Mac OS X in your Applications folder?  If so, we need to remove it.

    In the meantime, download and install this: http://support.apple.com/kb/DL907

    Restart your Mac.

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

  • HP LJ1160 print very slowly in the Windows XP computer.

    Original title: XP printing issues.

    for printing on HP LJ1160 with normal word or notepad files XP spend about 26 k to more than 4 MB and so are taking ages to print - reloaded drivers newer but still not good - of the suggestions

    Hi Tony060142,

    As the computer is on a network Small Business Server, I recommend you post your question in the TechNet forum for assistance.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the helps of information.

  • HP 1217 starts printing VERY slowly. A web page took 15 minutes to start printing!

    My HP1217 takes a LONG time to start printing. A web page took 15 minutes. A 5-page report took 10 minutes.

    That this has something to do with the pages visited on the computer? My computer is about 4 years old. It isn't real fast, but is not true slow either. It runs Windows 7.

    Any guidance on this?

    I can do something for this speed?

    Wow! I have reinstalled drivers, restarted the computer, restart the printer, and it seems to work perfectly. Maybe it was the drivers...

Maybe you are looking for

  • Cannot connect to Game Center after updating iOS 10

    I know that in the update it delete the Game Center app (which personally I didn't really like that) but now when I try to play a game involving the Game Center, it said something like if please connect to Game Center or unable to connect to Game Cen

  • Re: Problem starting L300

    Hello. I'm having a problem starting my L300 - it works very well up until now and has suddenly developed this problem. When turned on it, - very slowly - boots for the logo toshiba with the message "F2 for the Setup utility, F12 for Boot Manager" st

  • How can I set up time + date on HP officejet Pro 8500 a-A910a

    Help, please

  • Family safety does not work?

    When I try to set up family safety for some of my users, I get the following error message: Any ideas how I can fix this problem?

  • Reg: Previous value from the dropdown list select...

    Hello In my application, dropdown with 2 values IE ON / OFF. For the first time if I select VALUE drop-down list and close my request... once again if I open my application... I want the previous value must be selected... How to do this... Please sug