My 520 touchsmart Windows 8.1 no returns no mode 'sleep'

Similar Questions

• Windows 8 will not wake up mode 'sleep'

  I have a Dell desktop with Windows 8 and he will wake up sleep mode, if it isn't being used for awhile but if left for a long time he goes to sleep and won't wake up. I tried to turn it back on

  • touch mouse
  • touch the power button / stop
  • using the windows key + C
  • no result except if I make a strong power down

  Now, he has started to download windows updates without installing

  The best that I have saved for the end... It will not cut down, it will only in power saving mode

  very frustrating... suggestions please?

  Was given this same problem and I fixed it.  Check to make sure that she is not actually wake up!  In my case was wake the computer itself, but the graphics card was not.  I could hear the processor fan back, hard disks turn upward, but nothing on my screen.  In my BIOS, there is an option to do not allow the built-in graphics adapter sleep.  It was called "RC6 make Standby" and I turned it off - fixed!

• My Windows 7 Desktop won't go in mode 'sleep'

  My Windows 7 Desktop is not in mode 'sleep'.

  First, restart the computer and try again.  It should work.  If it doesn't, try changing your diet plan.  This should allow you to put in standby mode.  Also, make sure you're clicking on the Start button, and then the arrow next to Shut Down or Hibernate and then sleep.  Other tips are available at: http://www.waltwachon.weebly.com

• HP Pavilion QG833EA #ABH G6: after the upgrade to windows 10 I tride return to windows 7

  HII,

  After the upgrade to windows 10 I tride return to windows 7. Now wen my laptop startsup screen is all black and shows.

  An operating system not found. Try disconnecting all the drivers that do not contain an oparating system.

  I have afriting of tride, but noting help als cant reser of system or bios. I said a test of the system is givs oke!

  How can I reinstall windows?

   

• I want Windows Internet Explore 7 return not Windows Internet Explorer 9 How do you please

  I want Windows Internet Explore 7 return not Windows Internet Explorer 9 How do you please

  Buna,

  Microsoft has this exact Information available for you.

  "How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  And that he will explain to you too much here on earlier Internet Explorer, you still.

  Note

  After you uninstall Internet Explorer 9, the previously installed version of Internet Explorer will be available on your computer. There is no need to reinstall.

  Revedere.

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Thunderbird freezes when Windows 10 fate of mode 'sleep'. SOLVED by disabling lightning, provider for Google Calendar and calendar Tweak

  Since the update of Windows 7 Windows 10, Thunderbird has acted erratically. At random times, he keeps checking for new messages. If I then try to manually check for mail, it freezes. He meets some menu commands, but by clicking anywhere in the components (list the mailboxes), the list of messages, etc. does nothing. Sometimes, it opens a white notification window, which I can only get rid of kill it with Task Manager. More often, if I just close Thunderbird and start it again, it starts working normally again... For a period of time. The problem seems to happen most often when I turn Windows off mode 'sleep', but

  I'm currently under Thunderbird 38.2.0.

  I tried to disable some add-ons that I wasn't really using. I'll see if that helps. I saw that he suggested that users with similar problems running Thunderbird with all disabled add-ons, but I also saw that it said that it is really only a temporary fix rather than a real solution and I agree. List of enabled extensions:

  Add-on Compatibility Reporter 1.1.1
  The Update Checker 2.13 module
  Check compatibility 1.3.1
  Compact header 2.1.0
  Mark all as read button 0.7.1
  Reduce to a minimum at Lac revived 1.1.2.1

  Any other suggestions? Anyone else having the same problem? I saw a few others with Windows 10 problems, but nothing quite matched mine.

  Thanks for the help. Until now, deactivation of lightning, provider for Google Calendar and calendar Tweaks seems to have solved the problem. If it begins to freeze again, I'll do Mode without fail a test.

• Windows move to the main screen when sleeping Satellite-S50T-B

  Satellite S50T-B, Windows 8.1. Whenever my laptop sleeps, it moves all the icons and windows open on the secondary external monitor on the laptop monitor. Like a lover double screen, it's extremely annoying. I keep having to set up my work space.

  I expect that there is a bug in the video driver, which means that she sees the monitor off as a result of the command 'sleep' of the laptop as a monitor "unplugged" and it is reported to the operating system for the operating system moves all the icons and windows on the main screen, so when I turn again, they are all in the wrong place.

  Please note that the disappearance of the screen as a direct result of it being sent a sleep command should not be interpreted in any way other than the monitor to sleep as said.

  The graphics driver is old way... When can we expect an update?
  When I can see a fix for this frustrating problem?

  Hello

  If you would google for this problem, you will find a lot of discussions and information about this system.

  From my point of few this issue is linked to the State in sleep mode. There are the States of sleep mode (S0, S1, S2, S3, S4)

  S3 is generally the default standby mode, while the S4 is generally the mode of hibernation by default.
  Here all the details:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff564575

  You can use the PowerCfg command to change these settings
  http://TechNet.Microsoft.com/en-us/library/cc748940%28V=WS.10%29.aspx

• Vi return NaN mode

  I use the function to calculate the value of a table mode and it returns NaN. Help of LabVIEW says that she only returns NaN at the entry of the array is empty. I don't know why this is happening. My table is

  0,00015

  0.000114

  0.000146

  0.000188

  0.000139

  I tried with value mulitple of intervals.

  

  Thanks in advance.

  In this case, NaN means that no method has been found.  Look at it this way... you have a group of numbers and say to LabVIEW for break in 1000 separate "bins." If each tray has only 1 value in it, then there is no mode - no value that appears more often than other values.

  For all of your data, any number of intervals of < =="" 14="" will="" return="" a="" mode.=""  any=""> 15 returns NaN.

• Windows explore XP by default, search mode

  Everytime I open Windows Explorer, it opens in search mode instead of view folders.  It started a week ago.  I am running XP with all current service packs installed.

  This KB article...

  http://support.Microsoft.com/kb/321186

  .. .describes your problem with a Fixit and manual resolution. FixIt is not a good reputation on this forum, but maybe it's because we tend to hear only about the time that they do not work!

  Tricky

• Window - no disc - Exception Processing Message C0000013 interferes with the mode 'sleep'

  I get an error message when the computer attempts to enter the mode 'sleep', after the time runs out of screensaver.  It will not allow the pc go to the "sleep mode" and if I try all options listed... it starts then the mode "standby".  Sometimes, it appears immediately and I can ignore it by continuing the work at hand.

  The message is this: Windows - No disk

  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Options: Cancel try again continue

  Thank you... Joan

  It would be interesting to know what your system brand and model is and what your version XP and the Service Pack, but it's just a fantasy of mine that the Microsoft Answers forum would actually make for such things when a new issue is created.  This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Any error will always be displayed in case view the log, but you won't see any popups

  Reboot your system and check the things now.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• Desktop Windows vista always starts in safe mode

  Why windows vista always starts in safe mode?

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.