My 6270Z requires a USB adapter in more a wireless router?

Similar Questions

• Problems with wireless USB adapter. Icon missing "Wireless network connection".

  I recently got a laptop HD malfunction cause me to start my PC from 2004. I bought a Belkin N150 Wireless USB adapter to connect to the internet connectivity. During the installation, I do not get a "Wireless network connection" icon I am running Windows XP SP3. I installed the same USB adapter on a computer running Windows XP SP2 and it works fine. I plugged it in my desktop PC and it just doesn't work! Even with my router disconnected I should still be able to see other networks WiFi available in the range (I live in a community of apartment) as he worked on the other computer it elsewhere too. I double checked the drivers, reboot the cable modem, so that appropriate services were activated and still no dice. I have read forums and I'm almost at the point of paying MS for technical support services, but it's really just my last step before I shell out money for professional help. Notice to lovers? =)

  Hello

  Well, at this point, you should make an executive decision.

  If you think that someone will take just guilt because it's comfortable, it is not going to happen.

  If a new card that is known to work does not work, then you can try to re - install Windows.

  One of the differences between computer enthusiasts and regular users is the availability of the material. I have a set of wireless router, network cards, etc. that are known to be good.

  The components are used for the sole purpose of trying them temporarily on the troubled computers to rule out hardware problems.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• HP G62-220: can't 5 G USB Adapter to work

  I have a HPG62-220 and a 5G Router I just through my ISP. Bought a 5G USB wireless adapter. I spent many hours on the phone with the mfr of the adapter and my ISP to get this to work and I can't. My laptop will not update to the adapter network/download software. I got the software adapter to appear more than once in a zip file and carefully, followed directions to open and it shows that he is 'failed' to download the software for the adapter.  Lim suggests that in "safe mode" and erasing of all antivirus programs and firewalls. I tried several times. In addition, I had replaced USB adapter because they thought that maybe it's a defect. All USB ports (6) work with other devices. Help would be greatly appreciated. Thank you.

  Hello

  All your USB ports work? If Yes, it means nothing wrong with your computer. Now, my question: is the driver of food maufacturer for its product? What is it?  You may need to download the driver using a different machine, extract and copy to install on your machine.

  Kind regards.

• Equium A80: PS2/USB adapter does not work correctly

  I have a satellite A80. I bought an adapter to allow me to use a graphics tablet on the usb ports. The adapter gives a ps2 keyboard and mouse ps2.

  The adptor is recognized by windows and displayed in the list of hardware. It also shows the mouse connected to it as a gift. But, the problem is there is no movement of the mouse either and the ps2 keyboard does not work either.

  Any ideas?

  Hello

  I have never used these adapters and I can t give you a solution, but I can only speculate on this issue.
  I think you should check the mouse options in Control Panel. Here, you can also configure the settings. It is possible with the USB mouse, but I don't know if this is possible with the USB - PS2 adaptor. However, you can check it out.

  I remember, a friend of mine tried to use the keyboard PS2 on the desktop PC.
  He bought a USB-> adapter PS2 but it didn t work.
  The technician had said that there could be an IRQ problem.

  Well, you can also try to go to Device Manager and select mice and other pointing devices area.
  If he has listed more than peripheral mouse so I recommend disable it and only turned on the PS/2 compatible mouse.
  Try to do the same thing with PS/2 keyboard.

• Slate 2800 7 support of Micro USB to USB adapter?

  Hello

  I would like to connect other USB devices to my tab 7 2800 via a popular Micro USB adapter USB cable.   7 2800 slate does it take for USB 2.0 devices?  If Yes, what is the minimum requirements in terms of memory, etc. ?

  Thank you!

  Just use a clamping sleeve!  I got one when I bought my last micro card.

  This link for example.  :-D

  WyreNut

• I can not conncet to wireless network using belkin Play USB Adapter.

  Original title:

  How can I find my Wireless Zero Configuration because it is not available in my Services under computer management?

  I am running Windows XP Professional.
  I would also add that I just installed a belkin Play USB Adapter to make my PC wireless.
  This seems to be disabled in the Windows wireless connection netwrok thingy.
  Help please.
  Sorry I am a technophobe.

  Hi Alan,

  Looks like you've been on this issue for some time.

  If you were not able to understand the problem, you can check if this article helps you to correct the problem.

  For more information, you can have a look at this article as well.

  I hope this helps!

• Micro WUSB6100M Max-flow AC600 Linksys Wireless USB adapter

  Hi, is the Linksys WUSB6100M Max - AC600 Wi - Fi USB adapter Micro Stream works on a raspberry ft3? Ted +.

  Hello

  Thank you. I use a Linksys AE1000 right now on my ft3 raspberries and it works fine I just wanted to use a faster and more stable, so I can stream HD and 4 k on my raspberry ft3 so I thought that the AC600 MAX-FLOW micro USB wifi adapter would do the trick, but I'm not sure. I would like to buy one but not if it does not work on the ft3.

  Ted +.

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• My USB adapter heats up during charging.

  iPad USB adapter becomes hot.

  It's hot and it's hot. It is normal that there is a bit of heat. But the general reference point is "too hot to handle. If you can keep the charger and not feel like you're being burned, it should be fine. But if you can not hold, then stop using it.

  If you have an Apple Store nearby, bring it in to be evaluated. If you have doubts, then take the. Electricity is nothing to play with.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.

• Gigabyt USB adapter works does not win10

  gigabyt USB adapter does not not qin 10 / 64

  HP has not posted any drivers for it. It appears in Device Manager? All other usb devices work?

• CQ62-423NR: can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter?

  Can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter? I have the maximum memory (8 GB)

  Hello

  Yes, you can put any SDS/disc HARD SATA to USB HDD enclosure and you can use it as any HARD drive externally.

  Kind regards.

• Problem by acknowledging an instrument in series with a USB adapter in NIMax

  Hi Forum,

  I have an instrument designed to be controlled via a signal with a RS232 cable series and I try to get NIMax to recognize and send test orders.  My laptop (running Windows 7 Enterprise) has no serial port so I use a USB adapter to connect.  When I could not initially the device appears, I searched online and find suggestions that I should install the NI-VISA driver.  I downloaded and installed, but it does not help - to open VISA test panels is greyed out and it indicates that the unit is 'away' even when it is plugged.  When I open the control panel interactive of VISA directly, the device appears as a question mark, and if I double click top, it says the following:

  Error opening resource:
  ASRL10::INSTR

  VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.

  Any thoughts on how I can get my PC to communicate with the device?  Thanks in advance for your help.

  Erica

  

  EricaK wrote:

  Thanks for the tip, I didn't know that I needed to install a driver for this.  Do you know if a general device like this driver will work.

  You need to install some drivers Windows are necessary for your USB-serial adapter (should have with the adapter).  Once Windows detects the serial port will be MAX.