My acquisition of data NOR usb-6008, does not appear in labview after installing drivers

Similar Questions

• Acquisition of data NOR usb 6008: a strange problem: mxwcgoutrunsilent.VI is not respected

  Expensive OR

  Today, I bought an acquisition of data NOR usb 6008

  and I'm using labview in 2011
  the problem is appear when after I end the process of configuration of the i/o data acquisition Wizard

  the following image shows the mxwcgoutrunsilent.VI is ignored and an error has occurred

  

  someone can help provide this VI for me

  What is the complete labview modules can also so I could do a real time data acquisition

  Best regards

  mangood,

  You received an error code? If so, what is it? What version of NOR-DAQmx driver you have installed? It seems your driver potentially incorrectly installed, and you may need to reinstall the driver.

  Here is the link to the latest version of the NOR-DAQmx driver: http://www.ni.com/download/ni-daqmx-9.8/4297/en/

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• USB key does not appear in the Finder or Desktop

  Using the latest version of El Capitan on a Macbook 12 "and then plug a SanDisk flash drive in the USB - C drive: the device does not appear in the Finder, at all, not under devices in the sidebar, or anywhere in the Finder. Also it shows only intermittently on the desktop. Of course, this makes the useless car.

  I found that the USB 3 restart MB with 3 USB stick connected via an adapter to the port of C rises. But we must secure it by Apple with an update of the firmware; We should not need to use workarounds to get 3 USB works through much touted app one port USB C.

• USB key does not appear in my computer with Windows 7 home Premium

  I have an Acer Aspire 7750 running windows 7 Home premium. When I insert a flash into the USB drive, I hear the sound that indicates the flash drive is inserted, but the drive does not appear in the window 'my computer '.

  I'm not a novice, but certainly not an expert so please keep the explanation of the basic if possible solution.

  Thank you very much for your help!

  Hello

  Check if the same works in different USB Ports, in Device Manager if there are any unknown devices or try to uninstal and reinstall USB Root hub, that should help you. Let know if you have the same problem. You can also check with all other USB devices if works.

• USB key does not appear in windows 7 sys.

  When the USB key is inserted it does not appear when the "computer" is selected.  I can not get information outside or inside.  If I go to "defraggler" it appears in the list readers here.
  Help, please.
  RB

  Maybe this drive letter is hidden. You are able to access the drive by typing the path or the drive letter in the address bar to explore or the run [Windows key + R] dialogue box?

• DAQmX does not appear in Labview 8.5

  Story: Got fed up with Vista and downgraded to XP SP2. Reinstalled Labview, Measurement Studio, then DAQmX 9.4 (downloaded the last of the site NOR).

  Measurement Studio seems to load DAQmX tasks correctly even though I'm scared to compile in the case where he trashes working hours. I have no reason to trust that he will not.

  Just LabVIEW does not recognize DAQmX. It does not appear in the box tool. MEAS & Automation runs and talk to my USB-6212, so I guess that data acquisition drivers need to be installed and load correctly. But Labview... N/G. This version (DAQmX 9.4.0f1) is not compatible with the LV 8.5? I don't understand.

  I uninstalled DAQmX & reinstalled with the same results (none). Help, please.

  It seems that LV 8.5 tops on DAQmx version 9.3:

  NOR-DAQ and LabVIEW (for Windows) version compatibility

  Steve

• "Hyperion" menu item does not appear in Excel after the Installation of SmartView

  Hi all! When I installed first SmartView, everything was ok - menu item "Hyperion" appeared in Excel and I have established the connection to planning and has worked with the data in Excel with success. Then, once I got to select all the data passing through Ctrl + A, in the form of data open in Excel and tried to copy it to a different worksheet in the same workbook, Excel threw a message about a serious error and informed me that the add-on of Hyperion would disappear. So it has been removed actually. When I reinstall Smart view, the installation went well but the menu item "Hyperion" did not appear in Excel again. I tried to reinstall Excel both SmartView and restarted the system several times, but still the Hyperion menu item does not appear in Excel. Can someone me hint on how to solve this problem? Thank you very much in advance!

  Hello

  This post help you anyway? Re: Smart View (point of Hyperion in Excel is gone)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ForecastFox does not appear on a clean install of FF5 with active addon-bar and bar state-4-Eva installed.

  Newly formatted PC, Windows Vista. I did an installation of FF5, pulled down as the default download on the Mozilla site. Installed forecast Fox, did not show. Turned on the toolbar of the add-on, it now shows icons FireBug and anti-ad, but no ForecastFox. I installed the toolbar state-4-Eva, changed icons alignment right, but still no ForecastFox

  What stupid way of doing things in this extension! I've been using Firefox since 2002, have used or tried hundreds of different extensions, and it took me almost 10 minutes to understand how it works.
  No help here - http://www.getforecastfox.com/ - and the image is for a Mac, which is like what, 5% of the Firefox user "market."
  And their 'support' - Questions? Need help? - http://groups.google.com/group/forecastfox-users/ - shown on the download page, has very little 'answers', especially a bunch of questions from lost users.

  ForecastFox display is on the Menu bar, which is hidden by default in Firefox 4.0 and later versions on free software most, with the exception of WinXP - but it must appear when the customization mode is open, they are the tabs on top is selected or not. (I have no idea why it does not appear in your screenshot). You can also see if you press the Alt key, you must open view > toolbars and click on the menu bar to have it open all the time.

  More there is no instructions on how to configure and use this extension and is not easily detectable - they should use a 'premiere' page on the Options page of forecastfox with some kind of instructions and screenshots for all operating systems.
  
  http://www.getforecastfox.com/customize/16/ - to change the Options, such as adding a 'place', change 'units', etc. And the 'button' to 'customize' or move the screen only appears when this page is loaded in Firefox, even in a tab that is not displayed! (And that brings up a security problem with Firefox, because it is not a "secure" page, but it's something I'll bring in support of the Addon for one or one at Bugzilla)

  "Screen" can be moved to a different toolbar, but you need the mode customize open and 'slide' + with the circle around it (which only seems to be present during the loading of this page - http://www.getforecastfox.com/customize/16/ - in Firefox), to be able to move the screen to a different location. In addition, a lack of "convention" with personalization, use cursor changes that are not the same as with the other tens of thousands of Firefox Add - ons that are available for Firefox. "A helping hand with the extended index" is the usual cursor used to display the 'sweet spot' to 'slide' mode customize, but this extension uses the cursor to "move" instead - the ToolTip for that says "move".
  "Drag and drop to move Forecastfox.
  ' Close the page options to hide this icon.

  See CSS2 Cursor property - http://www.gtalbot.org/DHTMLSection/Cursors.html

  I hope that answers all your questions with the Forecastfox add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/Forecastfox-weather/

• E4310 does not recognize the DVD after installed WIN7 drive

  My wife has an E4310 who was no longer necessary to his office. She knows that I like to tinker with computers and the machine seems to be a decent unit. The hard disk has been removed for commercial reasons, so I installed an SSD without any hitch. I also installed WIN7 use of the DVD player.

  Now the problem. The DVD player appears and tested very well using the bios but does not appear in the disk manager in WIN7. I tried several different suggestions I have read here and nothing works. It tells me that the question is somewhere in the operating system.

  Has anyone else had this problem or heard a fix?

  The trick to delete upper and lower filter in the registry did not.

  The program 'detect?"Dell has not helped.

  I tried a few other things that I don't remember now - I've been at this for hours, this one has really confused me. All suggestions are appreciated.

  Hi AXMRDR,

  Thanks for the detailed response.

  To test the built in admin account. The standard user account will be several changes in the operating system to find out the registry. Built in admin account will have its own hive. This could help isolate if the question is related or not.

  In addition, restart and check mode without failure.

  Keep us updated.

• Simultaneous to the AO and HAVE with the acquisition of data NOR USB 6001/MATLAB Toolbox

  I am very new to data acquisition and bought a NI USB 6001 to start to learn. Because I can get free MATLAB through my University, I use Matlab data acquisition Toolkit as the data acquisition software.

  My problem is that I get the following error message when I try to generate an AO (an LED voltage) signal and measure a signal I (voltage of a battery of 9V) simultaneously.

  ATTENTION: This change is caused in the dump output data queue.  Use queueOutputData for the queue data before the start of the object.
  Hardware does not support the specified connection. Check the user manual of the device for the valid device routes and pinout.

  However to measure IA or by generating the AO each by themselves works perfectly well.

  My Matlab script looks like this:

  daq.getDevices;

  s = DAQ.createSession ('or');

  s.Rate = 1000;

  s.DurationInSeconds = 10;

  addAnalogInputChannel (s, 'Dev1', 'ai0', 'Voltage');

  addAnalogOutputChannel (s, 'Dev1', 'ao0', 'Voltage');

  aoVoltage = 1.8 + 0.1 * sin (linspace (0, 2 * pi, 10000))';

  queueOutputData (s, aoVoltage);

  s

  startBackground (s);

  Note that adding the channels HAVE and AO at the session also works, however I get the error mentioned at the start of the session. This is a limitation of my data acquisition hardware (I don't see something like that mentioned in the manual) or do I have to modify the script?

  The pins connected for the LED are AO0 (+) and AO GND (-).

  The pins connected to the battery are AI0 (+) and (-) AI4. (The problem is still there if I use the reference to the ground for AI)

  6001 cannot make simultaneous tasks.  Very standard limitation of the low-end hardware... just don't have on board computing resources to handle such things.  Even the 621 x boards have only limited multitasking abilities.

  Can intensify to a high range data acquisition ($$$) or buy a 2nd a low end and synchronize tasks in software (not as precise calendar).  I've done two approaches, one is "best" really depends on demand... If low-cost or high-performance is a priority.

• Connected USB iPhone does not appear in the Photos

  Can anyone help with this? I want to import my photos from my iPhone to the Photos (via USB). However, the iPhone is not appear. It does when in iTunes. Weird.

  Thank you!

  Fred

  When you view the sidebar in photos move your mouse up to where it says import and stationary just to the right, you will see hopefully not the word 'Show' that if you click on should reveal your phone.

• Connect menu USB devices does not appear in the view Client 4.0

  Hello world

  I am facing a problem with the display Client 4.0, in some facilities does not display the menu to connect USB devices on the top of the Menu bar.

  This situation occurs in some computers that are running Windows Vista or Windows 7.

  Is that what someone has experienced this problem?

  I think it's a problem of display compatibility customer with some component installed on the operating system, but I have not identified which we.

  Any help, pls.

  Kind regards

  Carlos Luna

  You are right, that the view Client 4.0 does not install USB drivers on 64-bit computers.  64-bit is coming.