My advent AW10 WIRELESS printer does not print

Similar Questions

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• HP Photosmart c309a network wireless radio does not. printer no longer sees (network)

  My Photosmart c309a printer is not ALL networks.

  -using the windows Vista

  -four portable wireless maintain excellent connections to the home network

  -a the recent failure of electricity, but all computers domestic mobile re-login to the network;

  -a ran HP wireless network Test Report which shows wireless "On", but "The FAILURE" of wireless work;

  -diagnostic report also shows wireless radio does not. and I have to contact HP support.

  So far, I took the following measures:

  -stop the entire network (Linksys router)

  -unplugged and replugged the printer and router

  -set factory default printer

  -all I can think (but go ballistic)

  I have a similar problem, except that my 309 a link but if it is idle for a few moments he log out and have to stop and reconnected or reset using the configuration menu.  Contact with HP said that HP is aware of the problem but that he has no intention to post a fix and the problem is inherent in most of their printers...  Techrep indicated that the best solution to get a new printer.  I recently bought a Canon all-in-one and it works as advertised.  I always use my HP in a wireless mode, but you need to restart after each impression if more that a few short minutes between printing.  Sorry I'm no help, but just passing on what HP says about this printer.

• HP Photosmart 5520: wireless radio does not

  I can't connect to my router. I run a wireless network test and he said that WE wireless... PASS, but he also said "the wireless radio does not work, contact HP support.

  Please advise...

  Not good.  It seems that your radio wireless the printer is dead.  If the unit is under warranty, you need to call HP.

  What you can do, is get a USB print server and convert the USB connection to a wireless connection.  However, check the prices on these devices because it may be better just to get another printer because they are so cheap.

  Or just use your USB connection.

• HP c309a wireless radio does not, help

  THX in advance for the help. I'm trying to set up printing from my IPad on my hp c309a printer wireless. Can't get it to connect. Just ran diagnosis on the printer wireless. Says ' wireless radio does not. Any help?  THX

  The Radio not work wireless message usually indicates a problem with the card wireless in the printer. I'll try to do a hard reset of the printer. A hard reset will attempt to restore the printer to a good working condition and no settings are lost with a hard reset.   If the reset does not work then you can contact support at 800-474-6836.  The link below provides warranty options.

  Out-of-warranty options.

  Contact Hp outside the United States.

  1. when the printer is turned on power, unplug the power cord at the back of the printer.
  2. unplug the power cord from the wall outlet.
  3 reconnect the power cord to the product and the wall outlet and then press the power button.
  
  Let me know how it goes.

• HP ENVY 7640: wireless radio does not want 7640

  Buy this printer recently worked for about 20 minutes.  The printer says THE WIRELESS RADIO NOT FUNCTIONING.  Advice or should she be returned.

  Hi @HAYHEATH,

  Thank you for visiting the Forums from the HP Support! I see that you have found a "Wireless Radio does not" error message on your new HP Envy 7640.

  Contact our technical support HP 800-474-6836 because this can be a hardware problem. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

• C309a wireless radio does not

  Hello

  By running the wireless network Test, the report states that: "the wireless radio does not work." Is there something I can do? Or I have to call HP support?

  Thank you.

  JP

  Finally got through technical support and a nice person who has finally understood the problem. I mentioned that the wireless network Test report says clearly "The wireless Radio does not work" and he said it was about as sharp as a fault might be. After a brief discussion with her supervisor, he said that HP would replace the body of the printer - the part with the wireless radio. Overall, a very pleasant conversation and not a long either. The appeal of all took 5 min to determine that HP would replace and perhaps another 5-10 minutes to work the shipping details.  Congratulations (finally) to HP!

• In test report says wireless network wireless radio does not (8500 a909g)

  I can't get my HP Officejet Pro 8500 Wireless put A909g in place on the network. I have the correct network name, security type, and the security key, but it does not detect the printer. I ran a test on the printer's wireless network and, at the top of the page, it says "the wireless radio does not work... '.

  What can I do?

  Try to reset the printer by pulling on the plug and waiting for 30-40 seconds.  If that is fixed, contact HP for repair or replacement.  Prepare to spend hours with them on the phone.  Keep your handy wireless network test.  Also run a printer status report.  You need both.

• Photosmart 6510e wireless radio does not

  So far, I've only used the printer connected to a PC with a USB cable. I wanted to be able to print wireless with a laptop and tried to change the configuration of the printer by using the utility in the Help Center.

  I received a message that the connection could not be made and to contact HP support. Unfortunately the warranty failed in September last without having tried me the wireless connection.

  From the screen of the printer, I printed Test results wireless network which said that ATTENTION the wireless radio does not work. Contact HP support.

  This would involve replacing a part and how big a job is? I did a number of repairs on the equipment myself before.

  Hello elainetw,

  Please try the below mentioned steps...

  1 > while the printer is turned on, button on the wireless on the screen of the printer icon.

  2 > then press the DEFAULT NETWORK

  3 > after awhile, turn the printer off. Wait 30 seconds. Power to the printer.

  4 > press the icon on the screen of the printer and then wireless active wireless Radio.

  5 > now hit the 'Test of Wireless Print report' and enter the values for ON Wireless, works wireless and wireless network detected.

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• "Wireless radio does not work" when the Diagnostic tool is run

  Recently, I unplugged my C309a HP Photosmart Premium and he moved to a new Tablet next to my main computer.  Wireless network card works perfectly before the move, and now it does not detect networks to connect to.  I have run the wireless network test report and it says "Wireless Radio does not work.  Contact HP support. "I can do here to help solve this problem, or I have to pay for repairs somewhere?  I want to believe that this HP product can support more than a simple passage of one shelf to another...

  Any suggestions would be greatly appreciated!

  * Note * I know my network works correctly (because I'm connected to it now...).  My computer detects my network as well as several others in the neighborhood.

  Is the printer still under warranty?  If yes you can not he repaired, but it can cost almost what a new printer costs.  Here is how to contact HP.

  Your printer must be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• my wireless keyboard does not work with windows xp

  Hello

  I installed osx el capitan yesterday.

  My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.

  And no problems with OSX el Capitan.

  Thank you very much for the help.

  Boblecingle

  Windows XP is now fifteen years old.

  Are using you it on a Mac somehow, for some reason any?

• Tecra A3 - Creative wireless mouse does not work

  My Creative wireless mouse does not work while the touchpad is installed.

  Even if I turn off the touch pad, the seal of the mouse does not work.

  Anyone know how to fix this?

  Thank you
  R.P.

  Hello

  On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

  As much I know external mouse functionality does not depend on the touchpad settings.

  Good bye

• Wireless adapter does not

  recently restored my HP Pavilion DV6-6C35DX, and now the wireless card does not work

  It appears in the device as Realtek PCIe GBE Family Controller Manager

  the hardware id is PCI/VEN_10EC & DEV_8168 & SUBSYS_1805103C & REV_06

  I tried to search for the drivers but can't seem to find a

  any help would be greatly appreciated

  Thanks in advance

  not 100% sure how mark as resolved, but in the meantime eventually, fortunately the pilot

  Thanks for all of you who have seen this, but as I'm sure someone would have helped me