My Advisor in charge of HP has stopped working, how to fix this?
I try to open my care advisor and it says that it has stopped working. I can go to my control panel and do things like that.
Please uninstall HP Total Care Advisor of add/remove programs or the option programs and features in Control Panel. Download and install the latest HP total care from following link advisor:
FTP://ftp.HP.com/pub/SoftPaq/sp50001-50500/sp50046.exe
Tags: Notebooks
Similar Questions
-
I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another? Thanks for any help on this.
Hello
1 did you change on your computer before this problem?
2. when exactly you receive error message?
You can follow the methods and see if it helps.
Method 1
Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
(a) click Start .
(b) in the search box type command prompt.
(c) right-click and select run as administrator of .
(d) type ping 127.0.0.1 and ENTRY.
If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.Method 2
Check to see if the problem exists in safe mode with network.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 3:
Alternatively, you can try to reset TCP/IP and then check if it helps:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 4:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I get the message AIOC. EXE has stopped working how to fix this
How can I fix my system that aioc.exe has stopped working
Hi Neil,
Thanks for the reply.
I need a little more information of the computer with the problem. Please help me answer the following questions:
(1) what is the brand and model of the printer?
(2) which toolbar is installed on your computer?
(3) you are able to print after receiving the error message?
(4) you have problems with the normally another impression of the toolbar?
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Edit tools: pointing out the tool has stopped working, how to fix this?
My highlight tool worked this morning, but after clicking on a box that says do not yet show that my highlighting tool has stopped working. How can I fix it?Rahul,
After posting my question, I found how to solve my problem. I just reset the warnings edition.
Thank you
Kelsey
-
My dell support has stopped working, how to fix?
My dell support has stopped working and I get a pop up message. How should I do?
If a Dell program does not work, contact Dell for help on the issue.
-
host process for windows services has stopped working - how to solve this please
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Programs that you have problems with windows services
- Error messages host process has stopped working
- Recent changes made to your computer no
- What you have already tried to fix the problem restart free cookie wrestled
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Programs that you have problems with windows services
- Error messages host process has stopped working
- Recent changes made to your computer no
- What you have already tried to fix the problem restart free cookie wrestled
-
"intellistor backup engine module has stopped working" how to solve this problem?
This module is to enable the back upward on hhd Samsung 1 TB Samsung AutoBackup program
Not being is not familiar with your program, it's worth to uninstall then reinstall your backup program is not if nothing else works?
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Will the system restore back you to a point before the problem?
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
http://support.Microsoft.com/kb/936212/#appliesToHave you tried to test with another Windows user?
See if there is something in these similar positions.
-
igfxext module stopped working how to fix this
When I try to go on line of the above message shows after that it will cast its process to get online igfxext module stopped working how what can do to fix this thanks a lot rich
Hello
I suggest you to follow the steps from the link below and check if it helps:
Method 1 :
You can try to check if the problem occurs in safe mode with network.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Method 2 :
If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
Windows vista has been giving messages: window has recovered from unexpected shutdown down and showing process (rundddl32) also host windows stopped working. Internet Explore has been blocked or does not. Please tell us the solution-thanks
Hello
Thank you for your response.
I suggest you follow the steps from the link; It will help you solve the problem.
Method 1: An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer: http://support.microsoft.com/kb/940520
Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 3: If this is a recent problem, then you can try a system restore and check if it helps.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can see the following link.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Please perform these steps provided recommended and post back if you still have the problem.
Hope this information is useful.
-
The error message is Windows telling me it will find a solution and warn me, however, I do not get a message for me to rectify the problem.
Hello
1. were you able to play games sooner?
2. don't you make changes before the show?3. What games you try to play?
I suggest you try to start the game by placing the computer in a clean boot.
Step 1:
How to perform a clean boot
http://support.Microsoft.com/kb/929135
Note: Once the diagnosis is done, reset the computer to start as usual.
Step 2:
Game hangs or quits unexpectedly
http://support.Microsoft.com/kb/303032
Step 3:
See the event viewer for newspapers
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Hope this information is useful.
-
wireless mouse market works but shuts down for no apparent reson, I'm not good with computers and need a simple fix
Hi Sandra,.
You can try to install the latest version of the drivers for the mouse and check.
For more information, you can consult the following article:
Troubleshoot the failure to find new mouse connected to your USB port
-
"Adobe license utility has stopped working" - how to fix?
When I open Indesign, I get this error message:
Signature of the problem:
Problem event name: BEX
Application name: adobe_licutil.exe
Application version: 8.0.0.68
Application timestamp: 535f5ed3
Fault Module name: adobe_licutil.exe
Fault Module Version: 8.0.0.68
Timestamp of Module error: 535f5ed3
Exception offset: 00170488
Exception code: c0000417
Exception data: 00000000
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 2057
Additional information 1: 049d
More information 2: 049d850c271f650a33e470b71da42287
3 more information: f6f4
Additional information 4: f6f40edfd6d47180b620c0ae231a2a77
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
InDesign works normally, but see this error each time I use Indesign makes me crazy. How can I fix? I scoured the forums, but most of the discussions about this error are old and none of them had a fix that worked for me.
In this case, it is necessary to check with errors when log files to find the cause of the crash.
I recommend you contact Adobe via Live chat Support once, they can even remote access computer and solve the problem.
You can try:
Feel free to post the update.
-
my windows media player just stopped working how to fix this?
I had no problems before with windows MediaPlayer normally if I click on an audio file it automatically starts playing the sound now it usually open even when I click on the windows media player icon. What should I do to fix this? do I need to download a new version of windows media player, if so where can I download it safely for free? Thank you.
Hello
1. what operating system do you use?
2. don't you make changes on the computer before this problem?In response to the questions above could help us help you better. However, you can try the methods below.
Method 1: Search for the issue in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Method 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message.
For windows XP:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427For windows vista or 7:
Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer -
When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?
Original title: the process host
How to perform a clean boot in Windows:
(solve a problem by performing a clean boot in Windows Vista, Windows 7 or 8)
http://support.Microsoft.com/kb/929135Perform a clean boot to determine if background programs are interfering with your game or other programs
http://support.Microsoft.com/kb/331796One by one add back an application both in the boot list to find the offending software application that causes the message "host process for windows services has stopped working" is displayed...
J W Stuart: http://www.pagestart.com
-
I have a message on the screen indicating the dell support center has stopped working how can I solve this problem
Hello
as you have problems with the Dell software, contact Dell
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
or ask in the Forums of Dell Support
Maybe you are looking for
-
Problem with 'other' storage.
Hi, I need help with the obvious problem I have with my storage. If anyone can help to reduce the size of the other section, it would be great. I read through many threads gone although the steps recommended without result. (first aid run the utility
-
Please guys my laptop using windows vista premium to household use and windows is not in time on normally I can only log in safe mode... Wen he lights up normally after about 30 minutes, it remains on my desktop screen and nothing, when I click to go
-
Cannot open my attachments with windows vista
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
I have the DVD tha tcame with the computer. I want my computer too close to "like new"as I can get it. " And I like to keep my drive d as my recovery disk. Y at - it special antythieng I should know. I have 640 gig hd.and 15 concerts for the recove
-
My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver a