My Android devices wil not wake my printer to power saving Mode

I have an istalled of color M276nw MFP HP LaserJet Pro 200 as a wireless network printer. I have several computers with any operating systems XP and Windows 8, which wakes up the printer to the power saving without problems. I can also print wireless from my phone Windows 8. The problem is when I try to print from my Android devices. I installed the HP all-in-one Remote App on the Android Store and they seem to be installed correctly. They recognize the network printer, tell me that this is the energy saving mode, but are unable to wake him up. Can anyone help with this one please?

The version of Android on the Tablet is 4.2.2

Hello Jerends and thank you for your attention to my printer problem. My printer has a fixed IP address so no need to go this route. I managed to work around the problem by deleting the HP all in one application of my Android devices and its replacement by the HPePrint App. It is not perfect, but does the job.

Thanks again.

Tags: HP Printers

Similar Questions

  • my printer does not close power saving mode

    I have a OfficeJet 4500 wireless and when he's asleep he goes into power saving mode.

    When I try to print it does not print and I can't turn it off, the power button is unable to work.  I have to unplug the printer, then restart it to return to normal.

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
    -Apply the subnet (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • C410a will not stay in power saving mode


    After talking to many technicians HP, I finally got my problem fixed, but not because of HP.

    My problem was my VoIP service, it seems that if you use VoIP to fax it will 'keep alive' your printer, the same as a network.

    Anyway the way I know it's because I got rid of Voip today and hooked to landline from Verizon (FiOS) and the printer that's happened in power saving Mode since then.

    I hope HP is followed this forum, as this will save a customer like me several hours of time wasted on the phone, talk with the support


    Thanks for all the suggestions of he.


  • My Dell is power saving mode and will not come out

    My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

    Hi Ma32206,

    Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

    A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

    B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

    Bindu R - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • L7780 HP 'add a device' can not detect the printer on the network

    I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

    I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

    I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

    The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

    So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

    HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

    HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

    But "Add device HP A" not somehow the printer detec.

    Please notify.

    Hello Impact,

    I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

    I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

    Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

    Let me know how this document from HP has helped.

    Thank you

  • Brother MFC-L27000DW do not wake on print

    Just bought a Brother MFC-L27000DW and have problems make him wake up when printing to it.

    I have a Windows7 machine and it seems to have no problem to wake the printer to sleep deep whenever I have something down the print queue send to her. El Capitan however doesn't.

    I downloaded the latest drivers from brother and can get the printer to work if I put it off and then on again. But I can't seem to print from El Capitan by sending something to the queue printing after that he went to sleep.

    I wireless print and there is no wifi connection problem because it works very well after completing the printer.

    Update for this. After having frustrated and entertaining the idea of returning to the printer, I called brother support.

    They walked me through the process of updating the firmware on the printer and now everything works normally.

    Impression of something of El Capitan it will send to the queue printing and the printer will wake up from deep sleep and print normally.

    Everything is good.

    In case anyone want to know the details, you can press on the ' *' and ' # ' at the same time the keys on the keypad of the printer and see your firmware version. My long string of digits began with an 'H' and the latest driver from 11.1.2016 is 'J '.

  • Satellite L500-208 does not automatically go to power saving mode

    Dear guys,

    I have a Satellite L500-208 (Serial: PSLS9E) with pre installed Windows 7 64-bit.
    For some time, the laptop does not automatically energy saving mode (as configured in the Power Options).

    Automatic change "Energy saving" worked some time ago and all of a sudden, it stopped.
    However, I do not remember what changed and probably caused the problem.

    Everything works fine and a manual of hitting on "Energy Save Button" also works very well...

    Before you guys suggest an update of the BIOS, the BIOS is version 1.60.
    Current version is 1.90 (or same 2.00?).
    Well, I missed an update and from the Toshiba Web space seems to be very rare, they offer only the latest version of the BIOS.

    Can someone points me to older versions of BIOS, or any that may give a clue to the strange behavior power?

    Kind regards


    Maybe there's something wrong with the Eco utility.
    I recommend reinstall this tool.
    On the European driver Toshiba page, you will find this tool.
    After the new installation, please check the settings provided by the Eco utility.
    Eventually, you will need to activate the energy saving mode automatic

    Good luck

  • S2409W, setting HDMI will not go into power saving mode?

    So I searched high and low on these forums of the Dell Community (and other sites) and I've not seen this documented problem. The problem I have is when I plug the cable HDMI to computer (Tower slim 530) to my s2409w, I get a nice clear picture and everything works as expected, until I put the computer in standby mode.  The computer sleeps, but the monitor turns off almost as if he was going to sleep, but then display Saver screen default monitor that says "hdmi cable does not exist.  What I was expecting the screen to go to power save mode. When I use my DVI or VGA cable and put the computer to sleep, the computer and the monitor switch mode 'sleep' as expected.  This problem only occurs with HDMI. I tried setting the screen "automatic detection" and "hdmi" for the selection of cable and no work to put the monitor to sleep. Anyone has a solution, or similar experiences?  I've seen a lot of posts on power audio hdmi save the problem, but not with this one.

    -Thank you

    I know this is an old thread, but I had the same problem with another Dell monitor and a homemade computer.  In another thread, someone said that some cables HDMI I have this problem, and others do not.  I just wanted to confirm that it IS THE CABLE.

    I swapped HDMI cables with my TV.  The TV had a cable older and thicker.  Immediately after that, the monitor will now sleep just right.  What I can guess is the skip of thin cables really cheap make the connections required for this feature since the TVs didn't have standby mode.

  • DocuPrint 205 b - shows as a device, but not as a printer

    I just bought a HP Pavilion PC, still trying to get my head around Windows 8 (hate it hate it hate it!), but what makes me really mad, is how am I supposed to print with this thing?

    I have a Fuji Zerox DocuPrint 205 b, this is a great no nonsense black and white laser printer that was absolutely superb - but this computer does not seem to understand that it is a printer?

    It came as "unknown device" in a first time, I lost almost an entire day on this tent to install drivers or anything that needs this thing. I installed this OS, Windows 8 a 64-bit driver.

    In a troubleshooting tool point Windows argued the problem was "resolved" because it was connected to a USB 3.0 port and needed 2.0 - except that I plugged into a 2.0 port and nothing seems to have changed.

    I love my printer. I like it a lot more that I love this computer, in fact I hate this computer because it has Windows 8 and they wouldn't let me buy it with Windows 7...

    So, how can I get this thing to print?

    Currently, the printer appears as ""not specified"

    The driver seems appears under "" other software"-" DocuPrint P205 b - Fuji Xerox - 1.016.00 "instead of in"drivers"" "


    Someone has an idea, because I'm running out of ideas and patience with this thing?

    There is a difference between the name of the printer.

    Here is the link I was looking at.

  • print get msg "device is not ready or printer is busy you want to wait...". »

    as above I get this msg when I try to print.
    Do not have the same problem with other browsers

    In what version? According to the forum software, you have published using Firefox 3.6.28. Is this correct?

    It goes without saying that the older versions are insecure and should not be used on the web.

    Try the "reset" described in this article:

  • May not wake my Equium P300 from sleep mode

    My * Equium P300-16 t * not waking up from sleep mode.

    If I use Fn F3 I get the message enter sleep and from what I read by pressing the power button wake the machine upwards, but not in my case.

    I also tried the Power Options to automatically mode after a specific period, but once again I can't wake the machine and do a hard reboot.

    My OS is Vista Home Basic.

    Anyone offers advice on how to fix this please?

    Thank you

    > but again I can't wake the machine and do a hard reboot.

    Your BIOS is up to date?
    Otherwise, update the BIOS

    Also in my experience sleep mode issues could be caused by corrupted system, so new facility could help solve this problem too.

  • Vista will not wake up out of the hibernation mode, reboot

    Running Vista Home Premium with Service Pack 2... computer goes into hibernation mode after some time and he doesn't wake up.  It is used to show me the office, or that has never been open for a second, then return empty.  I used to be able to hit CTRL Alt Delete, then cancel and everything would be fine.  Now, I have to hard reboot.  I can force the issue with Ctrl alt del and then by selecting Hibernate.   It very well when I force the sleep.

    No error codes, etc.



    1 I want to erase the General corruption and repair/replace damaged/missing system files:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista


    A Fixit for Hibernate

    How can I enable hibernation on my Windows Vista computer?

    How to reactivate the lack of Hibernate Option in Windows Vista?


    More if necessary:

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution

    How to enable and disable Hibernation - you can try to disable and re-enable the it.

    How to restore the default power in Vista (and then go back and change as you wish)

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • U3415W is not in power saving mode (linux)

    I have a new U3415W connected to a GTX 980 cable displayport Dell, using DP 1.2

    When the display is in sleep mode it blanks (set via the screen saver), but the backlight remains lit and stay on indefinitely

    (I also don't get any audio, but would use it not in all cases)

    HI - seems to have been a regression from NVIDIA - corrected in the Version: 352.63 (published on 16/11/2015)
    "Fixed a regression that prevented doctors of Podiatric Medicine to work correctly on some DisplayPort presents."

    everything works fine now (so far!)

  • My computer keeps going into power saving mode and it is not configured for it... What can I do

    My computer guard shut down in power save mode... I installed everything that has been suggested to correct this, but nothing works

    Read the documentation that accompanies and/or to communicate with the computer manufactures Technical Support.

  • 6600 HP Office Jet: Samsung devices do not find my wireless printer.

    I have a Samsung galaxy phone s5 and a Samsung galaxy tab s. Tablet I bought an HP officejet printer 6600 on there a year and a half and everything was connect and working properly everything wireless from my phone and tablet. Just recently my Tablet and phone will not find my wireless printer more? I still have the wifi service and my devices can find my fine router and Internet service.  I borrowed a non portable samsung to check that it was not a printer problem because she has always found a printer and worked well. I don't know but, possible had a software update on my phone and tablet that could change something I guess?  Any ideas to fix or try to fix it. I don't have a pc.  Thank you


    Things to quickly check would be that your printing device apps (ePrint etc.) are updated and that if there was no wifi password changes that this has been updated on your printer also.

    I recommend also, if it is not already in place on your android devices to download the HP print for android (be sure to activate the plugin in settings after downloading).

    After all the above steps, I will re-start your devices and if this does not help, I would also like to restart the printer. Finally, I would like to restart the router if none of the steps above help.

Maybe you are looking for

  • button to archive does not work. Win 10

    Button win 10 - archive does not work in Thunderbird emails with current updates

  • Tecra A7 fingerprint sensor support

    Hello! A skier of Tecra A7 have a fingerprint sensor and some not. How will I know if my A7 has a sensor? There is a quarter on the right side of the touchpad, but it has the same color as the case of notbook.

  • Second DAQ assistant in the power control system does not

    Hi all I need your help on this issue. I'm currently programming a VI for one command power supply for pool boiling experiments. The organizational structure of the VI program is attached. I use two assistants DAQ for steady-state acquisition and tem

  • Stay connected...

    Outlook is not keep me logged in when the box is check ask that I stay connected?

  • I agree

    I can't change the parental controls without accepting the length of service, but when I go to them there is no where to click I ACCEPT. Where is he at?