My AOI 926 printer jams
My front misfeed AOI 926 the study comes to the print head
Hello
1. which version of the operating system you are using on the computer?
2. you receive an error message?
3. don't you make changes on the computer before the show?
Method 1:
You can try the steps in the link and check.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
See also the link to learn more:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Method 2:
You can also consult the advice given from the link provided and check.
http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19179277.aspx
You can also contact the support technique dell for assistance.
http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/root/en/AIO?c=UK&l=en&s=Gen& ~ section = 008
Tags: Windows
Similar Questions
-
My 926 printer keeps saying that I have a carrier jam. I already have made sure that nothing hinders the cartridges, turned the power off and on, even uninstalled and reinstalled the printer on my computer. The cartridges are intact, complete, and I have paper in there. I even resorted to completely disconnected and shaking the thing upside down, backwards, everything short of throw it against the wall. Support tells me its and old and that I should just buy a new. I just bought 2 new toner cartridges for it that cost as much as a new printer. If anyone has any advice I would appreciate it a lot.
At my wits end here.
Tina GoE,
Try to look at the coding Strip. Read the second post to...
Cleaning the MICR band (loud bang of the carriage of the printer)
Rick
-
Copy/scan Dell AIO 926 Printer Issue
25/03/2013
My 5 year old AIO 926 prints of email, Word, excel, etc.. And it is used to copy a page on the glass without problem.
For the last 5-6 months where using the copy of the format, it tilts a vertical column starting 5 inches from the left margin to 6 inches, how it start printing correctly on the right margin. This is consistent from top to bottom, as something covered that part of the page on the glass.
I uninstalled the printer 2 times, downloaded the driver of many times and reset the command offset printer as well, but nothing doesn't solve this problem. The printer works fine for files sent by the PC, I suppose that it is not a problem with cartridges. I'm not a PC guru and utilization of my setup only for fairly mundane personal stuff, so probably miss me something complicated (for me) that I could try. Can I get help in simple language for someone at the level of expertise "of the PC for Dummies"? Thank you. Email responses would be appreciated: ADMIN NOTE: identification of Email deleted by privacy policy >
Hi Rick Carbonneau,
As we tried all the steps above, it seems to be a hardware failure. Based on my experience of the belt scan starting jams by causing this issue a bit.
You can consider replacing the printer.
Do not respond if you have any other questions.
-
Printer jam HP Photosmart 5520 cleared but printer refused to print.
I had a printer jam and allowed as usual. The offending page has been removed and it is together, with no part of it remains in the printer. But the window statement printer keeps saying there is a paper jam and tells me to delete it, and then click OK, and that he refuses to print. I tried to go through the process of 'unlock' again, several times. I have re-charge several times the paper in the tray. I turned off the printer and the computer. I removed the print request in the queue on the computer. I repeated all these actions. Nothing has made any difference. My operating system is Windows 8:1. Can anyone help please?
DaCu salvation,
Thank you for answering my questions and have tried the solutions proposed.
This really sounds like a disputed associated hardware, the fact that you have gone through the paper jam guide, and that the printer is unable to make copies. With the printer is in warranty, I would certainly recommend to you please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
Best regards!
-
My Dell V505 worked fine but now he folds the paper and the printer jams.
Can you help me please?
The Feedback forum is, as you can easily name, post your comments on the web site of Microsoft Answers, only not to ask questions of the printer. I moved your post to the windows 'Hardware and drivers' forum. I also changed the evocative title of your problem. "Printer print" is not a very useful title.
Clearly if your printer is having hardware problems, you should consider a repair shop or buy a new one. Sometimes, if you clean the paper path, paper jams can be relieved, but with most of small printers, they are not gererally not repairable.
-
Installation of the Dell AIO 926 printer problems
I have a Dell 530 s computer Vista Home Premium and a Dell AIO 926 printer. For some time now, I had a problem after printing 3 or 4 times that I wll get a message that the printer Interface was lost or something similar.
I uninstalled the printer and have installed many times online and on the driver CD. The printer installs and I can print. However, for Fax or Scan, I have to go the the program and open it. When I go to programs, Dell printers, Dell Photo Printer AIO926 the only thing it is the uninstaller.
I really need to be able to scan.
Help ~!
In case anyone else has this problem; I had to turn off my Norton Firewall and it works ~!
Hi joelash1,
As you have already reduced to Norton firewall causing the problem.
It is possible that an exception should be created in Norton firewall to resolve the problem.
I suggest that first update you the Norton firewall and check if it works.
If that does not solve the problem, then you will need to contact Symantec for more information about adding exceptions in the Norton firewall.
http://us.Norton.com/support/index.jsp
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
No communication with the Dell AIO 926 printer.
My Dell, Windows Vista, computer will not communicate with my Dell AIO 926 printer. I went through the troubleshooting guides and the printer is powered and cables are connected correctly. I downloaded Windows 'FIX IT' and there is no problems found. I still cannot print anything on the printer. I tried printing from Word files and the internet and nothing works. I went in administrative tools to check that print spool is set to automatic, and running. I also checked to make sure I have the latest printer driver. None of this has helped. Please notify.
It worked before? have you tried the dell diagnostics. There should be a ficility to test the printer, either in the printer driver / utilities or by pressing a sequence of the inclinometer on the printer. Help of the printer Dell could guide you.
Finally he could simply do not have
-
My dell desktop computer shows my printer dell 926 printer defaught but when I try to print the printer application and the number of copies, but then it won't print after I selected print
pureclass,
If you have print jobs stuck in the queue, you may need to run first delete print jobs
I would unplug the printer, then download and run the patch (cleaning printer utility) until it prompts you to restart your computer.
Restart your computer.
Then install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)
More information about the patch and the drivers can be found at...
926 photo printer owners all-in-one thread (W7)
Rick
With Windows 7, I found that installing the software and Vista drivers in compatibility mode works well. [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Reference Dell 926 printer will not print after installing Windows 7
After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?
Greg,
I think that we all regret our first wedding, well most of us.
Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.
Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)
To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.
Rick
-
fake K5400dn printer jam error
I'm out of HP Officejet Pro K5400 K5400dn on Mac OS X v10.8.5. I can print from my iMac. But my MacBook gives me a message of paper jam printer that I can't erase even restart the computer, disconnect and reconnect printer. I can run this same MacBook computer printer diagnostic checks that fine print and I can print without problem from another computer. Cannot find out how to clear the error of printer jam that seems frozen in the queue on this printer only. Any suggestions?
I was able to solve the problem by removing the printer my printer list HP, eliminating all jobs "pending." When I added the printer to the list - the error message disappeared and it is printing.
-
Dell photo 926 printer and an hpL1750 computer and they want to feel what can I do to print
I have a dell photo 926 printer and an hpL1750 computer and it want print what can I do to get to print
Did you download the driver and install it? You can get it here.
http://www.Dell.com/support/drivers/us/en/04/DriverDetails?driverId=R146832I hope this helps.
-
My Dell Photo AIO 926 printer does not work with windows 8
new Dell said there is no driver for my Dell Photo 926 printer is there a way to make it work?
Hello
You can try to disable the print spooler before uninstalling the software.
After restarting your computer, turn it off before you reinstall the software...
This adds the steps mentioned previously...
-
5520 all in the transport of a printer jam
I unplugged, turned off moved round-trip transportation, and again, it will not be printed. Before it stopped working it's some unpleasant noise like a machine gun. I guess that is not a good thing? Please help or is this another throw away?
Welcome to the forums cp64
I saw your post on your Photosmart 5520 is more printing and already make loud noises. There could be some paper stuck in the printer itself. I would say by following the guide below. Make sure that pay you special attention to cleaning the rollers as well. Sometimes a good cleaning can solve the problem!
A "Paper jam" Message appears on the control panel
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Thanks for posting, have a great day!
-
HERE'S THE DEAL. I HAVE A CANON PIXMA MG2420 PRINTER THAT I BOUGHT JUST 2 MONTHS AGO OR MORE. I WAS WORKING GREAT AND I STOPPED USING IT FOR A WEEK OR TWO SINCE SCHOOL ENDED. WHEN I TURNED IT TO PRINT SOMETHING IT BEGAN TO MAKE STRANGE NOISES AND THE LED STARTS FLASHING. THEN HE STOPPED AND STARTED LOADING THE PAPER EVEN THOUGH I PRINT NOTHING. THEN IT STOPS HALF WAY AND THE ERROR LED STARTS TO BLINK 3 TIMES. I KNOW THAT IT IS THERE NO PAPER JAM BECAUSE I FOLLOWED ALL THE STEPS TO CLEAR A PAPER JAM. THEN REMOVED ALL PAPER FROM THE PRINTER, IF IT IS TURNED OFF AND THEN TURN IT BACK ON. AND IM STILL GETTING THE SAME ANSWER. ANOTHER THING IS WHEN I TURN IT OFF. HE STARTS LOADING THE PAPER, THEN MADE A BUNCH OF NOISE AND SHUTS DOWN.
WHEN I OPENED THE PLACE WHERE IM SUPPOSE TO PUT INK... WHERE THE LETTERS WRITTEN ON THE METAL UNDER THE TRUCKING OF THE INK PART. THE PRINTER PRINTS ON PAPER AND IT NOT THERE NO PAPER WHITE WHO FATE. IM GET VERY ANNOYED AND FRUSTRATED. I DO NOT KNOW WHAT DO. I EVEN BOUGHT NEW INK THINKING THAT IS THE PROBLEM, BUT IT IS NOT OF CLEARLY. CAN HELP YOU...
I LOVE MY PRINTER AND I WANT TO REPLACE IT.
Thank you
INNOCENCE
It's embarrassing. ignore my essat. I found my long lost in the printer hair band my bad...
-
How can I fix the error message 1203 on printer Dell 926? Unable to print!
You may find the answer here:
http://answers.Yahoo.com/question/index?QID=20091012063733AAnkO8i
or
http://www.fixyourownprinter.com/forums/printer/48161
or try this
Please follow the steps below to reset the printer and let me know the result.
Turn off the printer.
Disconnect the printer power brick and wait 10 seconds.
Press and hold the Start and cancel, reinsert the printer power brick.
Press and hold the Start and cancel until the power light blinks and the printer turns off.
Turn on the printer.
The printer will be in initial Setup mode and you will need to choose a language, country and enter the date and.
OR
Another solution found on the net:
Error 1203 is an interesting error code. Here's what I discovered on error 1203
It is average your cartridges of overflow of nine cartridges after a several impressions or all after you filled cartridges. Check to see if the ink are smeared on the holder where the contact panel with the cartridge. I have the same problem which I think lexmark has a problem and forget.
Solution:
I use the klennex with a few drops of water to moisten and cleanse back them on my printer work and support.
The charging of ink work very well if you let it sit 24 hours. Then before you print anything, you must run aligned the cartridges once or twice then run once or twice cleaning cartridges.
Print the test page to see how it's look and the way you're going.
Be sure to not leave the debris of the klennex on the door panel.I've added all the possible solutions in my blog here:
http://safeworldwidewebsurfing.blogspot.co.UK/2013/10/how-to-fix-error-message-1203-on-Dell.html
Please, share and follow! Thank you.
Maybe you are looking for
-
iPhone + 6a dropped in toilet 1.5 sec
OK dropped my phone in the toilet:) Please no stupid jokes I stuffed up big! still, works currently in rice now, as I had to google turn off then I have, but obviously I checked to see everything worked as it is. BUT I thought I'd play music because
-
I'm working on a state machine in queue configuration. I use a def type with all of my States possible in what elements of my queue. At the beginning of my program of the queue must initialize with a specific order, as shown in the snippet below. How
-
Hi all I'm having a problem when writing to a table. I want to transfer data to a FIFO that goes to an FPGA, but I would be all of the same length; some of them are formed of 30 bits, other 10... and everything should be 32-bit. The first image of de
-
SP3 and the files on external hard drive history ignores certain files.
SP3 and the history of files on external hard drive seems to ignore certain files. All this experience? I need to know why. Is weird.
-
my laptop not turning on... even... is running no fan moving .no led flashing