My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

Similar Questions

• black screen that says missing or corrupted file windows root\system32\hal.dll

  Original title: Media Center m470n

  I have a Media Center m470n. On startup, I get a black screen that says file missing or corrupt

  (windows root\system32\hal.dll). How can I fix? I have 10 disc that came with the system, what steps should I take just reload this file thanks

  Hi Albt,

  Do you remember any changes made on your computer before the show?

  What is the service pack installed on your computer?

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot my PC, I get a black screen that says ultra dma mode-6 s.m.a.r.t capable.

  When I start my PC, I get a black screen that says ultra dma mode-6 extended s.m.a.r.t. capable but disabled keyboard interface error press fi to resume when I do that it starts as normal, when I posted e logitech about this they said: enable smart in bios and save.  I can't remember if they said it was a hard drive or a hardware problem, how can I go to the bios either no matter what.  I have a keyboard and wireless mouse

  Thanks M Clark

  Hello

  I suggest to reset the default settings to default and check for the issue.

  You may also contact the manufacturer of your BIOS to change these settings.

  Important note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down. How can I get rid of him?

  Original title: appearance of office.

  There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down.  How can I get rid of him?

  Use according to the following seems easier for you (hint: the first link is exactly the same as "Method B" to the second link):

  http://www.dougknox.com/XP/scripts_desc/xp_commtask_desktop.htm

  http://www.askvg.com/how-to-remove-annoying-common-tasks-from-desktop-in-Windows-XP/

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip

  DAG

  These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.

  If you continue to plant I remove Symantec and use the built in Defender

• I just changed my signature of account Windows Live Hotmail E-mail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important.

  Hello!

  A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.

  Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!

  Hi Paul,.

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=2

• When I turn on my computer, I get a black screen that says "NTLDR is missing" or "NTLDR is compressed".

  original title: NTLDR missing/Tablet

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  See https://www.google.com.au/search?sourceid=navclient&aq=0&oq=NTLDR&ie=UTF-8&rlz=1T4IRFE_enAU448&q=ntldr+is+missing&gs_upl=0l0l0l12905lllllllllll0&aqi=g4&pbx=1

• black screen that activate Windows.Windows must be enabled before validation to determine whether this copy of Windows is genuine.

  I am writing on behalf of my friend who has had his computer for a while with no problems. Today, it starts up to a black screen and then you had this message

  Windows must be activated prior to validation to determine whether this copy of Windows is genuine.
  Windows is in reduced functionality mode.

  It runs windows vista edition Home premium and it is authentic. However, it doesn't have a disc.

  can help you as he declares that he has 30 days!

  Hello

  1. is your friend able to boot to the desktop?

  2 are there hardware/software changes made on the computer, before the show?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  a. download and save the desktop tool

  http://go.Microsoft.com/fwlink/?LinkId=52012

  b. Once registered, run the tool.

  c. click on the continue button, which will produce the report.

  d. Paste the contents of the report in this thread.

  See also,

  How to contact a Microsoft Product Activation Center by phone

  Resolve activation problems

• HP DV6 ENVY: Envy HP dv6 black screen that turned while WE

  I am very grateful for HP, that my cell phone ran very smooth for about 3 years, a few months after Windows 8 is out, and Christmas was coming right here. But after these good times, something strange happened on my laptop exactly at the beginning of April (wow exactly to April Fools Day and Yes this laptop trying to DECEIVE me I think, lol)...

  I'm used to update my computer so I could keep my computer running well as much as possible. The last update, I've done was updated my graphics card: Intel HD Graphics 4000. Unfortunately, there were errors in the update of the map, so I've manually updated, and it succeeded. Now the computer tells me to restart the PC, so I did.

  Now, something strange happened, he went through the process of restarting my laptop, after HP logo with the circle to move below the logo appeared, and after a black screen came through my eyes. Generally, it should be just 10 seconds so that it appears on the screen of Windows 8 and the login for the account, but that's happened. The black screen was 5 minutes, 10 minutes, still, waited 15 minutes and even 30 minutes! I was wondering what happens after upgrading my graphics card.

  If someone help me? Thank you!

  With legitimate answers correct?

  Oh yes my laptop specs:

  Intel Core i7 3630QM

  8 GB RAM

  Graphics Intel HD 4000

  NVIDIA Geforce 630 m 2 GB DDR3

  Resolution: 1920 X 1080

  Max of about 900 GB disk space

  Hi @sab-ero ,.

  Welcome to the HP support community! I hope you enjoy your experience with us.

  I see that you get a black screen after the upgrade of your Intel graphics driver. If the screen remains black our troubleshooting options are limited. Try to do a Hard Reset to see if a clean reboot gets it going. Keys Num or CAPS LOCK flashes at all? If so, how many times? If you are connecting to an external monitor, are you able to see anything?

• Black screen that appears (with a cursor) after startup on Windows 8

  When I start my pc I get a cursor and a blank screen after the Welcome screen. Help please

  Hi Salah,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it apepars that you get with the black cursor screen after the Welcome screen. I will certainly help you fix this problem.

  (1) the question has started recently?

  (2) have you made changes on the computer before this problem?

  Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

  Method 2:

  Step 1: I suggest to start the computer using safe mode and check if it helps.
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the issue is not persistent, then follow step 2 to find the cause of the same.

  St ep 2 : I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual.

  • On the Start screen, type in msconfigand press ENTER.
  • On the general tab, type or click the Normal startup option.
  • Press or click the Services tab and uncheck hide all Microsoft services, and then press or click enable all.
  • Then, press or click on the Startup tab, and then press or click Open the Task Manager.
  • In the Task Manager, select all your startup programs and then press or click OK.
  • When you are prompted to restart the computer, tap or click restart.

  Method 3: I would also say you update the display drivers and the graphics card on the manufacturer's Web site and check the status of the issue.

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Black screen because of a video driver when the computer loading.

  I tried to change my video driver and now I get a black screen when loading Windows Vista.  How can I regulate the video driver or any other suggestions?

  Hello

  You can access Mode safe? You start the computer, press F8 repeatedly. Cases in this use System
  Restore and/or know last good configuration.

  --------------------------------------------------------------------------------------------------

  No registration necessary data and re - install Windows Vista may be the best option if
  Here are a few more.

  You can save your files by putting the drive in another computer as a 2nd drive (the best) or a
  External drive USB enclosure and then backup to removable media such as CD, DVD,
  or other USB keys. Of course, a real computer store or your system maker can help to recover
  the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS
  -then on the Applications tab - lower right kind - new task - in EXPLORER.exe. Safe mode
  is accessible by tapping F8 as you start several times. CTRL + SHIFT + ESC will also start task
  Manager.

  First check this thread in case it is simple and if not to come back to this thread. http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.
  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the disks
  the manufacturer of your system will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Laptop 15 R-063tu: black screen occurs for a few seconds when the charger is connconnected

  Mr President, there are a lot of problems occurred after the upgrade to windows 10 but I have a lot of them except that, when plugged into the charger for my laptop on the screen goes black for a few seconds(3-4) and even when I plugged. He was failed on the help of version.please victory 8.1.

  Hi there @Dip009,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you had upgraded to Windows 10 and now you have a problem with the screen going black when you plug the AC adapter or disconnect your laptop of HP 15-r063tu.

  You get an error with the black screen?

  Have you tried to see if you get the black screen in Mode safe?

  Have you tried to run the Troubleshooter of power?

  Have you checked the power settings to ensure that the brightness is not set to 0% when the power cord is plugged?

  

  Have you tried to go to change advanced power settings to ensure that none of these settings are defined to enable the black display when it is plugged in?

  Have you tried to do Windows updates?

  Have you tried to make updates using the HP Support Assistant? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.

  Another option to try would be to go on the software of HP 15-r063tu notebook PC and the driver page, click the check now orange and HP will identify missing or outdated drivers and software necessary.

  I have a couple of documents for you to read for more troubleshooting. Here's one called Management of power (10 of Windows) Options. Here is another document for you to Microsoft called Troubleshooting black screen problems.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!