My Aspire ES1 shows a blue box after pressing F2, from the BIOS?

Hello

I tried a CD Lite Linux and changed the bios in legacy, I want to go back to windows, therefore turned back on and get a message on a boot network followed by insert boot media, thinking that I must return to the UEFI pressing f2, I get a blue box asking to enter a password, I remember not a setting.

ATER three trys the laptop can only re-boot

I think I saw a second type of blue box once and there has also been a displayed number, I tried enter the number but it doesn't seem to work.

Someone has an idea of what I was wrong?

Thought that you all would like to know what happened then...

I posted on a grant application and a good tech guy said that acer can fix this for 55,15 go books.

"This unit must be evaluated by a technician to remove password Bios of this device."

My friend Rob just fell this morning and happened took a glance, he thought it looked like a BIOS password ask... have you tried 1234. .He said... like on a mobile phone.

He then joined 1234

What he fixed, went back into the BIOS Setup, returned to the UEFI and eight WIndows now boots OK and no harm was done.

I know that I pressed some keys at random to try to select the BIOS mode, this was because the Acer message disappear so quickly. What is the probability that I could (with a blank screen) select set the password, and then type 1234

Unlikely that I thought I would.

Still, it's all good now.

I imagine that here in the United Kingdom, the warranty does not cover everything - we have a jet mentality.

Maybe we expect to be cheated by the people, of what we buy. Maybe if I had explained that the laptop was only a month old they could have been more generous?

Thanks at least for Mr Acer forum.

Tags: Acer Laptops

Similar Questions

  • I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

    I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

    See if this helps:http://www.sevenforums.com/tutorials/66482-memory-set-maximum-amount-used-windows.html

  • I bought after effects CC from the Adobe website. The screen flashed a messaged saying "your request". I have not received an email from Adobe yet with an activation code. When I check my account it says I have no purchase. Not sure

    I bought after effects CC from the Adobe website. The screen flashed a messaged saying "your request". I have not received an email from Adobe yet with an activation code. When I check my account it says I have no purchase. Don't know what to do next.

    Hello

    Please see the following links:

    Manage your creative cloud membership

    If you still need help please contact support: contact customer service

    *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

    Let us know if that helps.

    Kind regards

    BANI

  • Not able to bring up the Google search box after pressing control twice under Mozilla Firefox.

    Original title: Google with Firefox search box.

    With a previous version of Firefox, I could bring up a Google search box after you press control twice.  This no longer works.

    Hi SandiKP,

    When you face issue in Mozilla Firefox, I recommend you contact Mozilla Firefox support for assistance.

    Hope the helps of information.

  • How to close the PrintDocument printing dialog box after pressing on it's Cancel button

    I develop using Windows 7, VB.net 2010 and dotnet 4.0.  The application is an x 86 application of Windows Forms using the PrintDocument class for printing.  After the call to PrintDocument.Print, the application manages the PrintDocument events and a print dialog box is displayed that indicates the number of pages that have been printed.  The print dialog box also includes a Cancel button.  I noticed that when a print job is canceled by using the Cancel button in the print dialog box, the print dialog box does not close until the underlying application closes.  When the compiled application is running, the application must close before to close the print dialog box.  When the application is running in the Visual Studio debugger, Visual Studio must close before to close the print dialog box.  The print dialog box also throws an error "a StartDocPrinter call was not issued" when you press the Cancel button.  Once you press the Cancel button, printing of dialogue "pages" message changes to "Cancel printing".

    Can someone tell me what I do wrong?

    The 'Microsoft community' focuses on the consumer.  You're more likely to get help in the MSDN forums or TechNet (links are on the forums to know which forum to post in).

    https://social.msdn.Microsoft.com/forums/en-us/home?Forum=whatforum&filter=AllTypes&sort=lastpostdesc

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=whatforum&filter=AllTypes&sort=lastpostdesc

  • Add or remove destinations in the send to box after right-clicking on the programs.

    is it possible to add or remove destinations in the send to box? I have a program called it Konvert which I deleted via my progs add/remove from the past few months and I would like to add a wave converter program called Switch order to convert MP3 to Wav. I could then send the direct file.

    I don't know that you can do.

    With regard to your audio converter...
    I also Switch. As you already noticed, convert to Wav format is going to explode the size of the file. I say good shot upward.

    Here's a program a lot better a lot, a lot, for audio conversion. 'S called it CDex.
    He keeps the SAME size of file in WAV format mp3 *.
    It is extremely useful to electronic music or email delivery of PowerPoint presentations with music files integrated.

    Here is the link: http://cdexos.sourceforge.net/?q=download
    I use 1.70 beta 2 for more than 2 years now. I have demonstrated with version 1.5. (My OS is Vista Home Premium)
    If you are not comfortable with the word "beta", use version 1.5.

    t-4-2

  • Structure of the event does not clear the queue after his release from the Subvi

    OK I'm not sure if this is a stupid question or not...

    I was trying just a few tips and stumbeled on this problem...

    So I created a sample (not exactly)

    In qqq_Main.vi just press PressMe

    (it opens a Subvi qqq.vi)

    There are two buttons to stop "Alt1" and "pylone2".

    To close the Sub - VI press either on "pylone2".

    or press "Alt1", then "pylone2".

    with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

    For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

    I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

    The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

    Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

    You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

    There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

  • Blue screen Windows Setup hanging from the message "Setup starts Windows.

    I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result.  I got down to the wire with whiping the drive and now I am trying install Windows XP Pro Service Pack 1 (old drive, still trying to see if an operating system takes in general).  The BIOS Setup to boot from the disk, I get the blue screen of installation of Windows to pop - up and start installing its drivers.  However once he reaches the message 'Setup starts Windows', the screen freezes it for as long as I'm ready to watch it (left for a long period of time and no difference).

    Other cases that I also noticed when I restart my computer it will not even reach the configuration screen rather right at the point where you could normally see "Press any key to boot from CD" I received a message 'FreeDOS' and it hangs there.

    I'm not experienced with computers at all I'm just regurgitating given to me by my roommate who happens to know more information. I hope this isn't a hardware problem as I firmly doubt replacements will be economically feasible for me.  Any help would be greatly appreciated. Thank you.

    Hi scottycms,

    See the link that provides information on the reasons below the slot problem and the resolution for the same: Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 installation recognize SSD or HDD after (rate?) Update the BIOS

    Brief statement of the problem

    After a failed BIOS update (computer is turned off during the update), the computer would not start, indicating that it could not find an operating system.  I tried to reinstall Windows 7, but the installer does not recognize one of my hard drives or SSD internal here which was installed Win7 and my boot drive is - that it recognizes my external my book Duo (backup) but that doesn't help me.  The SSD and two internal hard drives still appear in CMOS and Partition Wizard, however.  How can I get the installation of Windows to recognize my hard drive, so I can repair or reinstall Windows?

    Note: I borrowed pieces of this post that I found on line since December 2015 since the circumstances mirror mine near each other.  In this case, the answer that seemed to work for the poster should go to Dell support, download the latest SATA RAID drivers and put them on a USB stick, then load them in when requested by the Windows Installer.  I tried to do this, but, assuming I have the right drivers, nothing appears in the same installation of Windows area after loading in the drivers the most recent that I found and put on USB from Dell.

    Specifications of the computer

    Desktop computer Alienware Aurora R4, at Alienware March 2013 purchased
    CPU: Intel Core i7 - 3820K @ 3.6 GHz
    RAM: 16GB Quad Channel DDR3
    Hard drive: 2562 GB SSD (SAMSUNG ATA SSD PM83 SCSI Disk Device)
    Secondary (storage) hard: 2 TB internal installed at the factory (Western Digital)

    Tertiary HD: 1 TB (I installed myself, since I had an extra, Setup has worked well for years)
    GPU: NVIDIA GeForce GTX 660
    OS: Windows 7 64-bit (not sure if Premium version?) family

    Readers are not in a RAID configuration.

    History of troubleshooting

    After nearly three years of use without problem, my fans were really loudly all the time - even at rest and I rarely do anything intensive CPU/GPU.  According to the information found online, I downloaded and installed the latest version of controls thermal/Alienware Command Center.  Who has not solved the problem of fan and makes thermal controls were not give readings that the more - basically said that the pump of the CPU had failed and that all shows as 0 degrees Celsius.  The information provided by the support forums, I decided to upgrade the BIOS (from v.7 to v.11) using updater downloaded from the Dell support site [perhaps a bad idea, in hindsight, I must admit, but same manual fan controls were not helping the issue].

    As the PC has been reset during the update of the BIOS, the computer fans started running at a very high speed - much more quickly that I had never heard before.  I was afraid that my computer was damaged, but I let go still for a long time.  After about 5 minutes, I foolishly forced a shutdown of the computer.  [Yes, I know, it was really, really stupid - well based on the fact that my computer does not boot up to BIOS and from what I've seen elsewhere online it seems the BIOS update went through, although with messed up settings.]

    After that, the computer would not start.  The error message indicates missing BOOTMGR.  I downloaded partitionwizard on the idea that it was a problem of partition/MBR and, of course, both my SSD (marked as "boot + active") and a secondary drive have been marked active. I did the second disc "inactive".  Assistant Creation of partition also shows not all of my readers, including their scores, correctly.

    In troubleshooting, I had also used my Alienware installation disc and tried to repair or reinstall Windows.  In all cases, the Win7 installation/repair program found no any operating system or hard drives. When I went to the prompt from the installation disk and tried DISKPART "list disk" or BOOTFIX. EXE, they only listed my MyBook external Duet (which I disconnected since then and now no discs see)-I've never seen the internal boot SSD or either of the other internal readers everything in Windows 7 install the program. Using various BOOTFIX. EXE options such as /fixmbr and /scanos help not - they complete "correctly" really quickly without effect or tell me that there is no OS.

    Now when I try to load up, I don't you the message BOOTMGR but rather get a topic that there is no current boot device and how I should insert the bootable media.

    I then tried to reuse the Alienware Windows 7 disc to reinstall Windows 7, but the installation program could not even find a hard drive.

    I also tried to install Windows on a USB bootable, but had the same result.

    Can I enter the CMOS configuration very well.  I can make and save changes to it very well.  It seems normal, and it correctly lists all three internal hard drives.  POST also correctly lists all of my hard drives.

    I saw the reference to change its RAID settings in the CMOS Setup, but my only two options are RAID or ACHE and none who changes the situation.

    I'd be fine with Windows 7 reinstallation on the SSD drive (would rather not do that, ideally, but it's just a disc of starting with some Steam games on it so easy enough to recreate). I don't have my documents among other internal readers backed up but I have not seen anything that makes me think that these readers have been affected, just that I have to get the recognized internal disks somehow.  As simple as somehow becomes the right drivers loaded in, and if so, how do I do that (previously, I downloaded all three files that lists by Dell under "storage device" and "drivers" option of the Setup disk to load on the support page and unzipped on a USB and used in, but that does not in the operating system appears so installation/repair access)?  Or am I missing some other step?

    Please let me know if screenshots or more information would be helpful - happy to give them once I am home and back in front of this computer.

    Thanks in advance!

    The value of the BIOS:
     
    SATA Mode = AHCI Mode
    = UEFI boot mode

    Win7-DVD, Win-8-DVD, or a Win-10 USB flash drive should start now. Use the one-time-starting F12 menu.
     
    For Win - 8 or install Win - 10, if the SecureBoot option is available, it probably should be activated.

    Connect only the Boot C: drive for now.

    Install only on a blank disc (no existing partitions, OEM, or other).

    And if the UEFI Mode does not work, you can always try to MBR (Legacy BIOS).

    If the SSD is detected in the BIOS, it is a good sign. However, if it continues to not work anywhere, you need to plug into a USB tester or external USB enclosure and connect the computer to work... to test for signs of life.

  • Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

    Hello

    I bought a new Pro A30 of Satellite earlier.
    Shortly after, I noticed the system sometimes
    would freeze, with a rattling of the HD.
    A reboot cold was the only solution.
    I was told to replace the HD I did but the
    problem persisted with the new HD.

    I tried a known working HD and the problem still persisted.
    At this point, the warranty period has increased.
    Frost started happening more regularly, and
    now, the BIOS does not recognize the HD player or DVD.
    It starts and then try to boot from the network,
    because he doesn't have a HD or DVD player.

    At this point, I think I need a new system board.
    Someone at - it other advice or seen this problem
    before?

    Thank you
    Ray

    Hello

    What happens if you remove the CD/DVD drive or the HARD drive?
    The laptop recognizes one of these devices?
    Have you used the devices recommended by Toshiba?

    in any case, this seems very strange and the dysfunction of the motherboard is not impossible

  • Tecra A9 - network does not work after wake up from the sleep/hibernation mode

    I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
    Keep it light, but there is no network and to solve it, I need to restart the laptop.

    Any help please.

    Kind regards.

    This is a known issue so take a look at this site:
    http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

    Updated the BIOS, and then it will work.

  • Satellite P200-1 has 2 dead after trying to update the Bios

    Hello

    I downloaded the latest version of the BIOS firmware of Toshibas site (European site). I checked it clearly with the model nr and serial nr. I went on the northern site to update bios and downloaded the latest drivers and BIOS.

    My laptop Satellite P200-1 has 2 and the nr series is PSPB6E-02J023N5. Toshibas site, I downloaded all the drivers needed and bios. I started with the installation of the BIOS, when I tried to install it, then my pc froze.

    My food was on.
    The fan went beserk everything and the screen froze.
    I tried to let it run for 30 minutes, because I was afraid to interrupt the installation. I couldn't wait anymore, so I turned off the pc by removing the battery and power.

    When I then tried to turn on the laptop, nothing happens. All black screen.

    Can anyone help? I used the correct BIOS driver of Toshiba's own home page, but apparently it didn't work. How do I restore the BIOS? I don't know what BIOS I use.

    What I've done so far is:

    1. use HP USB Disk Storage Format Tool with MiniDOS files to make your Flash Bootable drive: USB
    2 copy all the files from backup for your: USB key
    3 rename your BIOS to bios.wph file and copy it in your: USB stick. I downloaded the same BIOS firmware and downloaded as EXE file, I extracted the exe file and found a file called. ROM and I renamed the entire file in bios.wph
    4. remove the battery, unplug the computer from power.
    5. hold: Fn + B, then all in now the computer in power (do not connect the battery) and close the power button.

    But after that, nothing happens.

    I'm afraid that something was wrong during the update of the BIOS of m.
    It seems that your ROM module, where are stored the BIOS was not flashed properly.

    I guess you checked this thread because the procedure described is her even that you posted your message.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

    However, maybe you should try the procedure using the floppy and disk crisis described in the other thread.

    If this is not enough, your final option is the Toshiba service partner.

  • 15 - f305dx: after laptop waking from the stop of the screen of my hp 15-f305dx stays Dim

    OK, so it's kind of weird sny idea what would cause my HP 15-f305dx screen to dim after he wake from sleep? Could be the memory, causing this problem or should I try and reinstall the ati drivers with old ati drivers?

    It is very strange and have never seen this issue before, any info would be greatly appreciated!

    Thank you

    Robert

    Hey Sparkles1 thanks for your reply, I forgot to remove this matter from sadley. I was able to fix that pretty easy. I uninstalled the current ati drivers and reloaded an older version. That seems to have cured the problem without any other issues.

    Thanks again

    Robert

  • blue screen says to consider changing the bios I have what to do guard crashing

    Help

    Hello Indiafan,

    Thank you for your message.  If possible, you will need to go to the website of your computer manufacturer to find the latest upgrades to the BIOS for your system.  They should have instructions on how to update your BIOS after installation as well.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

    A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

    If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

    If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

    Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for

  • Location of new tiles of profile tab

    I wonder where the page tiles new tab are stored in the profile. I looked this https://support.mozilla.org/en-US/questions/1044266, but haven't seen any file named directoryLinks.json.

  • DV7 - 1228CA: DV7 - 1228CA to WIN 10 upgrade

    Hello I have a laptop HP DV7 - 1228CA and would like to WIN 10 operating system. I intend to move to the version of WIN 7 (64-bit), and then perform a free update to WIN 10 (64-bit) version. I've been able to find the software and driver download for

  • Installation of the graphics driver working only not on Satellite C640

    I have the Satellite C640. While I was downloading the drivers, installation of the graphics driver does not work.My resolution is also maximize up to 1022 X 768, where, as it should be 1366 X 768. If anyone can help me solve this problem?

  • AB-032tx: need drivers USB for Windows 7

    I got my Windows PC of 10 for Windows7 but I managed to download all the drivers for my HP laptop but USB device driver isn't there and USB does not work this is why... I tried to search the Internet using this driver update option... But found nothi

  • Impossible to reset or add new addresses of e-mail on N911n e-all-in-one HP Officejet Pro 8600 Premium

    Because I am unable to get my printer to retain new email addresses after you add the 1st time, I tried to restart the reboot of the machine to factory default. I went through the process of 'reset' the printer by unplugging / plugging the power supp