My battery does not load after my Vista laptop off for 3 months

Similar Questions

• MacBook Air battery does not load after resetting SMC

  

  Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

  Try resetting the SMC two times more.

  If this does not help, please contact Apple support.

  https://support.Apple.com/contact

• Battery does not load after update

  I have a MacBook Pro end of 2011 and just installed El Capitan. Since then, he has worked super slow. I've upgraded to version 10.11.4 yesterday, hoping that to solve some problems. Now it does not recognize my MagSafe adapter, and it does not charge. I did a reset SMC, but nothing happened. Before the issue of the battery, my screen was black when you start the computer. I did a reset of the PRAM, and it worked. I was stupid and never sustained up to my computer because I don't have an external hard drive. My battery percentage is very low and I have no idea what to do! Help, please...

  Unfortunately timed but you can have reached the point of battery failure.   If you have an Apple store near you, make an appointment and bring in assessment.   I'm sure you'll learn to save more often

• Satellite L500-14 X - battery does not load after upgrading to Win 8

  Hello

  after upgrating my laptop to win 8 battery continues to charge...
  the message says... "pluged but no current charging"...

  Any suggestions... except to reinstall win7...?

  Hello

  Usually, there is not much difference between Win 7 and Win 8 so I really put t understand why this battery issue must be linked to Win 8.
  In my opinion this isn't win 8 problem and I think that even if you install Win 7, this question is would not solve

  Try this:
  Disconnect the power adapter and remove the battery
  Now let the laptop disconnected for a longer period of time (10 hours)
  Then hold power button / stop along 30 sec and bring the two parties together.
  The adapter must be connected for a while to allow the ERP system the battery

• Laptop battery does not load after reaching a certain point

  Original title: battery

  Load wonn t the battery of MY laptop after reaching a certain point (sometimes after reaching 96% or 98%). It's a few weeks I bought this laptop. What is wrong with him?

  Load wonn t the battery of MY laptop after reaching a certain point (sometimes after reaching 96% or 98%). It's a few weeks I bought this laptop. What is wrong with him?

  Remove and reinstall the battery and check...

  If the problem persists

  CHCK the battery capacity... May be a problem with the battery
  http://www.NirSoft.NET/utils/battery_information_view.html

  If there is a problem with the battery, you can contact the manufacture for help/assistance/guarantee

  Tips to save battery
  http://Windows.Microsoft.com/en-us/Windows-8/tips-save-battery-power

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Https: / specific page does not load after udate to 38.05

  https://my.albertahealthservices.ca
  does not load after update of 38.05 on my desk.

  I tried it on my laptop and it will load BUT after having been undated to 38.05 also failed to load this page.

  Other secure pages (Bank) loading OK

  Works well in Chrome and IE

  Error message:
  The secure connection failed

  The connection to my.albertahealthservices.ca while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Thank you
  Brian

  The site may attempt to return to a lower version of TLS in a way that is no longer allowed in current versions or maybe use a deprecated suite of encryption.

  You can open the topic: config page through the address bar and use the search bar to locate this pref:

  • Security.TLS.insecure_fallback_hosts

  You can double-click the line to edit the prefs and add the FQDN (my.albertahealthservices.ca) to the value of this preference.
  If there are already websites (domains) in this list, then add a comma and the new domain (without space).
  There should be only areas separated by a comma in the column value (example.com,www.example.com).

  If this help you can contact this Web site and ask them to look into this and update their security.

  • https://developer.Mozilla.org/en-us/Firefox/releases/36/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/37/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/38/Site_Compatibility#security

• Is there a settings in Win7/HP have that battery does not load until it is less than 95%

  I just bought a HP Pavilion dv6 - 7043cl laptop and have noticed that the battery does not load unless it is less than 95%.  I am very concercerned because I had one cell different from another company where I had battery problems.  That the manufacturer was not helpful, and I will never buy their share again.

  I heard good things about HP, that's why I decided to buy this particular machine.  However, I've only had this machine for 3 days and now it begins.  I can't find a Win 7 (I'm under Win 7 home Premium 64-bit) setting that controls when the battery starts to charge.  It is a function of the HP Power Manager?  Is this a feature of the ships with their computers HP laptop battery?  Or is it that indicates a problem with this machine?   I am a student and I need a reliable laptop for school.

  Any information you can provide is greatly appreciated.

  Thank you

  HanNan

  Hello

  This feature is intended by design to reduce unnecessary charge/recharge cycles - reference for this lie in the 5th paragraph in the document below.

  http://support.HP.com/us-en/document/c00287805

  Kind regards

  DP - K

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• BlackBerry Smartphones 8830 battery does not load

  8830 does not load even after 12 hours of charging.  I can't find new battery in any store, I tried Verizon, Best Buy and Radio Shack.  Any ideas?

  I saw at BestBuy, maybe not your battery.

  You can buy another battery to another carrier, Tmobile or ATT as well.

  Get the 88XX - green (lime) (C - X_2) - 900mAh<--is that="" the="" color="" of="" your="" present="">

• Equium A110-233 browser does not load after reappattage

  After having reinstalled just the Window XP with the restore CD that came with the laptop. A perfect internet connection, but the browser does not load, it works as it is not connected to the internet.

  I previously have it reinstalled several times whenever the laptop has been slow, all very well. Pease advise.

  After having reinstalled just the Window XP with the restore CD that came with the laptop. A perfect internet connection, but the browser does not load, it works as it is not connected to the internet.

  I previously have it reinstalled several times whenever the laptop has been slow, all very well. Pease advise.

  Just to clarify, I can get the MSN homepage, I can type in the search box and get search results, but when I click on the results, it says not connected to the internet. I tried to download IE8 on XP, not connected

• IPhone 6 Plus does not load after upgrading iOS 9.3

  Hello!

  given that I've updated the iOS to 9.3, the phone does not.  The only way to do is to turn off completely.  And it charges very very slowy (5% per hour).  I also used other chargers for iphone genuine and it's the same thing.  The battery down too quickly (10% per hour). And sometimes, the battery goes down 7-8% in a few seconds.  It was perfect before the update but not anynore.

  I have exactly the same problem.  There are many of us that do. I need my phone for work and it is a huge problem, because it won't hold a charge and does not load.

• Equium L20 battery does not load

  I have an Equium L20 what battery does not charge. The Windows Powermanagment says he is in charge, but the percentage increases ever, I tried different batteries with the same symptom as a result.
  Battery LED is orange glowing as if his load but no matter how long I leave it on charge, percentage does not change. Windows detects the battery as well with all the correct information... I tried to remove the battery, to no avail. .
  Is it a software or a hardware problem?

  Published by: ADMIN on June 7, 2008 08:12

  Hello

  I also believe that it is hardware problem. There must be some problem with electronic power electronic board. Particular component? This component is placed on the motherboard, and I don't really know if you can exchange it separately.

• Laptop battery does not load fully

  I replaced battery week & last with a new original Toshiba battery when first start morning computer, it does not load, but not discharge does not, either.  The battery was working fine, but he is 7 years old.  I discovered that if I unplug the charger for a few minutes & plug it back, it will charge up to 100%.

  When I first use in the morning, the charging light lights NOT at all & when you check the battery icon in the notification bar, it can say something like 97% charged and not charging.

  This is Madam.

  Event ID #7036 (Service Control Manager) - is it classified as information or error?

  Remove the battery and reinsert to ensure it is snugly in place. He could loose.

  Download (free) BatteryCare to monitor the battery

  http://batterycare.NET/en/index.html

  Perhaps the battery is to give a false reading.  You have Toshiba Power Saver Tool?

  Look in the Windows Event Viewer > system log

  Are there listed errors that are related to the stop?

  Check your power cord.  Make sure it is nice and warm.  Check your power strip if you have to determine is not surging or short-circuit.