My c7280 all-in-one tells me to "open the door, clear cartridge Jam".

Similar Questions

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you

• C6280 all-in-one: I can't open the C6280 solutions Center.

  I can't open the solution Center. My computer is doing some updates (Windows 10) a few weeks before. I tried to reinstall the software (C6200) for C6280 all-in-one at least 2 times and but it won't open. The driver are ok. I ran print and scan of the doctor, it's not shpw all bit errors. So, what's the problem?

  After that I made my post, I found the solution in another post.  I'll copy what I found.  This is not my original work.

  The problem is with the last Windows security update.

  Enter "view installed updates" in the search bar of windows left in Windows 10.  It will take you to an option in the control panel.

  Click the Option shown

  Select the "update of security for Microsoft Windows (KB3132372) highlight and then uninstall it.

  This should be all it takes.

  I just set the solution Center on my computer.

  Thank you

• HP Photosmart C7280 all-in-one: tell me I need ink, I have not I the new cartridge in the printer. Magents

  When I try to print the commputer tells me that I need back into the port of Magent on my printer.  Didn't I put a new in cartridge.  It seems to make no difference. Any ideas.

  I had the impression of working.  What I did unplug the connection of two at the back of the printer, then reconnect hide them in.  And bang!  It is running.   Buz2

• C7280 all-in-One can't automatically print double-sided

  I recently updated my laptop, one with one with Windows 7 64 - bit Vista and the printer I have is the C7280 all-in-One.

  After installing the driver recommended on the site of HP (PS_AIO_02_Net_Full_Win_WW_130_140.exe) because of the CD supplied with the printer being impossible to install on Windows 7. After I try to print something (after setting the preferences on duplex), I received a message invites me to MANUALLY move the paper for duplex printing, which I wouldn't have to do as the printer as a two-sided printing accessory.

  The printer is capable of printing AUTOMATIC duplex on the Vista system, but is unable to do so now. In some other messages I saw that this could be remedied by following a few steps, and by changing some information in the properties of the printer, but my printer properties have many missing or grayed out areas. The following figures show this:

  

  

  Any help with this problem would be greatly appreciated, as I'd like to be able to automatically print double-sided instead of manually.

  The printer has been installed and used wireless for my laptop (both on Vista systems and 7).

  Press:

  Properties-> device settings->

  

• HP C7280 all in one. Problem copying

  HP C7280 all in one.  During the copy with the original on the glass, the copy is fine.  During the copy with the original introduced in the extra paper tray, a vertical line appears at the same place on each copy of the product.  Maybe some soil is at this location on the device that "reads" the original document because it passes?  Any suggestions on how to get and check this out?

  Hello

  I would tell you to follow the steps mentioned the link and check if this helps out you

  http://support.HP.com/us-en/document/c00899181

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• C7280 all-in-one print not

  I installed a new modem and router and I cannot print my c7280 all-in-one computer

  The best way is to change the SSID and password to navigate in the menu on the printer control panel wireless.

  1. press the button on the HP all-in-one Setup.
  2. press on until the network is highlighted and press OK. The network Menu appears.
  3. press on until the wireless configuration wizard is highlighted and press OK. In a few moments, a list of detected
  the networks will appear on the screen. The network with the strongest signal appears first.

  4. here, you should see the name of the new network. Select and insert your new password wireless.

  This should help you operational. I would like to know if you have any questions.

  Thank you!

  Sean

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Photosmart c7280 all-in-one

  Hello

  I recently used XP home on my computer and now install W 7 32-bit

  Can I print the pages dubbelsides in XP but now I can only print 2 pages on a paper dubbelsides when I select print dubbelside.

  I have install the complete software solution from HP website for the HP photosmart C7280 all-in-one device.

  Is there a solution for this problem.

  I want to print each page on one side of paper instead of 2 pages on one side of the paper?

  thakns for the answer.

  

• my printer hp photosmart c7280 all-in-one

  my printer hp photosmart c7280 all-in-one does not stop

  Hello! Welcome to the @Lukewp forums

  I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

  Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

  Let me know the results

• C7280 all-in-One responds to the print command.

  My HP Photosmart C7280 all-in-one has stopped responding to print commands on my home wireless network with a Macbook Pro.  The C7280 will scan and copy just fine.  A print order blocking Microsoft for Mac software or gets an error message on the Print Manager.  Following the instructions of HP I have reset the printer system and repair the disk (no fixed necessary); Then I need to uninstall and reinstall.  How do I do that?  (The C7280 was purchased in 2008).  Other suggestions?  Thank you!

  This widget could not be displayed.