My CAD U37 USB Microphone will not work supposed to be Plug-And-Play.

Similar Questions

• Grid of fluid will not work in IE11? Firefox and Chrome is very good. Any ideas?

  Need help on this one.

  I'm new to grid of fluid and I must say a bit of an amateur to Dreamweaver, but I get.

  I can create pages of fluid grid without any problem. Although this will not work with IE11. Chrome and Firefox works fine.

  I am also having the same problem with the fluid grid of Dreamweaver templates. I am confident in saying, I do everything correctly.

  Has anyone encountered this problem?

  By "does not" what does not work exactly?

  View?  Questions from the media?   Page layout?

  Using IE in Compatibility Mode which is essentially like display in IE7?  Try to disable Compatibility Mode to see if things improve.

  Nancy O.

• The plug-and-play USB mouse will not work on Satellite A100

  Hello

  I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

  Please help the mouse works.

  Thank you very much

  Hello Jayne

  It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

  As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Did not win 10.  I'm back to Win 7, player will not work.  Don't delete and reinstall.  Help please.

  Tried to win 10 and don't like it.  When back to Win 7, Acrobat Reader will not work.  Make me

  "the Acrobat PDF DC browser plug is missing
  Please reinstall Acrobat Reader DC for this problem"

  Also receive "the older version of Acrobat DC cannot be removed" Contact tech support group

  Try to install it becomes: "the network function you are trying to access is unavailable.

  Try to remove and reinstall doesn't work can not remove the old version and it will not reinstall it

  Please help.  Thank you, Scott Boyd [email protected]

  Try to use this tool: Download Adobe Reader and Acrobat tool - Adobe Labs

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 5 s microphone will not work when recording video with back camera.its a noise

  My dear engineers

  I had a 5 s 16 GB iPhone. now, I can't record video because it's one a kind of noise but video quality better .What do to this problem.

  IOS 9.2

  Thank you

  Try latest iOS update

  If the problem is still there your microphone near the rear camera does not work properly so best to take it to the repair by Apple Store

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• Vista will not work to open/run programs and some files, especially if necessary administrator auth.

  Hello

  I ' v got a computer toshiba laptop Vista x 32. Last week he began to do a lot of strange things that are quite annoying.

  First of all, when it is connected to two networks wireless or ethernet, explore and chrome, open and run fine but the network in the tool bar icon has a red x on it. When I try and open the network and sharing Center, it crashes.

  This causes the following problem. He now does open kind of folder on the drive hard or Administrator program needs approval. Previously, I would get the dialog box and screen gray, but now he is nothing when clicks or opens a new window but crashes. Other programs such as itunes does not open, but the office is strangely very well...

  Also, when online any kind of e-mail attachment or program download does not work. Shockwave flash blocks on bbc iplayer, but youtube works. Cannot open the PDFs online or

  Everything works normally in safe mode and from there, I ran Defrag, disk cleanup, auditor of errors and a 2 system restore nothing doesn't. I also tried the software audit tool microsoft malicious who found nothing.

  Is there anything else I can do? Any advice would be greatly appreciated!

  Thank you

  Matt

  Hello

  I ' v got a computer toshiba laptop Vista x 32. Last week he began to do a lot of strange things that are quite annoying.

  First of all, when it is connected to two networks wireless or ethernet, explore and chrome, open and run fine but the network in the tool bar icon has a red x on it. When I try and open the network and sharing Center, it crashes.

  This causes the following problem. He now does open kind of folder on the drive hard or Administrator program needs approval. Previously, I would get the dialog box and screen gray, but now he is nothing when clicks or opens a new window but crashes. Other programs such as itunes does not open, but the office is strangely very well...

  Also, when online any kind of e-mail attachment or program download does not work. Shockwave flash blocks on bbc iplayer, but youtube works. Cannot open the PDFs online or

  Everything works normally in safe mode and from there, I ran Defrag, disk cleanup, auditor of errors and a 2 system restore nothing doesn't. I also tried the software audit tool microsoft malicious who found nothing.

  Is there anything else I can do? Any advice would be greatly appreciated!

  Thank you

  Matt

  First check if your drivers are working properly, go to control panel, then Device Manager, then make sure that all of your drivers. Avoid any sign of danger on them if there so try to update or uninstall, or back the driver to resolve the problem.

  Then, make sure that your system is clean. using the analysis

  http://www.Malwarebytes.org/

  http://www.systweak.com/antispyware/ and try

  a-squared emergency USB key

  http://www.emsisoft.com/en/software/download/

  http://www.Avira.com/en/download/index.php

  http://www.SurfRight.nl/en/downloads/

  then clean your system of unnecessary files using http://www.filehippo.com/download_ccleaner

  then if the problem persists then prepare your computer to clean boot by typing msconfig in windows searchbox in startmenu, then press on enter then disable all startup items and any of the services of windows, then restart! see if it makes a difference? If she did then go back and see that caused the problem.

• Webcam & microphone will not work on Satellite C660

  My webcam and microphone have recently stopped working. Satellite C660-1F1 model.

  If someone could help me sort what would be great.

  After reading this description of problem a single sentence, it is not easy to tell when he is the problem.
  We don t know what can be the reason for this.

  Have you done all that can be responsible for this problem?

  Try to roll back OS to an earlier time using System Restore option. Maybe this will help.

• USB microphone does not work with Windows XP

  I have problems to make my USB Plantronics Gamecom headset mic works - be when the headset is plugged into USB port, or directly into the sound card. I think I checked all standard solutions: Windows OS updated, update driver for Plantronics, SB Audigy 2ZS Sound card driver updated, its mixer configured to capture a USB device to record the sound/voice and sound/voice playback (except when it is connected directly to the sound card, then I have this option is selected) , microphone not cut with setting the sound card and the "secret" on the micro iteself button is not on.

  Should there be an option to adjust microphone levels when I click "Open volume control" on the volume icon in the taskbar (lower right corner of the screen)? This option does not appear.

  Thanks for any advice you can give me!

  Norm

  Hello Norm58,

  I suggest that you install the drivers for the Plantronics device and check if it is enabled in the playback devices.

  a. Click Start, type Sound in the box to start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the Read tab.

  d. on the tab 'Read' it has listed the sound options at your disposal. It should read "The plantronics device" click on it.

  e. There should now be a checkmark on this option.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• microphone will not work if prgram Skype

  When a Skype program, I can't not micro just send message to Chester.

  Post it here: -.

  https://support.Skype.com/en-GB

• USB ports do not work all of a sudden and I can't back up or sync

  When I connect a device (for example, BlackBerry or external hard drive), the USB ports all of sudden does not recognize these devices.  Worked fine one day and then stopped working the next day.  I tried several times to address the problem by uninstalling the USB drives and reboot.  This worked only once.  Then, the problem is back.  I am frustrated and at a loss.  Any help out there?  Thank you.

  Hi Lee,.

  1. you remember to make changes to the computer before this problem?

  2. you receive messages or error codes?

  You can try to start the Fixit for USB devices and check.

  Check out the link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microphones do not work

  Internal, external & LifeCam Cinema Microphones do not work even though Device Manager and and his file States that they work properly.  I have the latest drivers.  When I go to sound recorder it says "Audio recording device is not found," for all the reported bugs.

  Hello

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High Definition Audio
  (this is an example and your can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question. Older drivers may also
  be the cause.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often and then
  Finally, install the current version. Restart and check after each test, not uncommon to have to run
  the pilot of 1 to 4 times or more. Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB drivers do not work properly.

  I have a netbook Vaio (name of the VPCM13M1E model) and USB drives will not work correctly. I ran a microsoft fix (hardware and devices one by one). The results said:

  -universal host controller USB Intel (r) 82801g (ICH7 family) - 27 8 does not work properly, and it has not been fixed.
  -Intel (r) 82801g (ICH7 family) USB2 enhanced host controller-27CC does not work correctly, and it has not been fixed.
  -Hardware changes may not be detected.
  Its very annoying because I cannot plug anything on the USB.
  Help, please.
  Camille

  There was a lot of mistakes in the case where the display indicating a gel delivers that seems to have started in early April.

  These gels seem to be preceded by the following error (Source - core-EventTracing):

  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  This error can be caused by a corrupted EppOobe.etl.

  You may be able to resolve the freeze by recreating the EppOobe.etl.

  First of all, can you do the following:

  Start > type options files in the "search programs and files ' and press 'Enter' keyboard > view > then under" Hidden files and folder "select"Show hidden files and folders and drives"> OK

  Then go to the following folder:

  C:\ProgramData\Microsoft\Microsoft Security Client\Support

  In this folder click EppOobe.etl , and then rename the file in EppOobe.bak

  Restart the computer and let Windows recreate the EppOobe.etl.

  I hope that will stop the freezing issue.

  If the problem persists with USB you can restart the computer using safe mode and see if the problem exists in Mode without failure.