My camera has reached 9999 photos and started renumbering 0001 but in a different folder.  If I import new photos in iPhoto, the older photos with the same numbers are overwritten?

Similar Questions

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force leave the insta

  I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force quit the installation program.  The update does ' t happen. I still have the 11.0.13 version.  How can I make this work?

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430

• Running the old and new Vcenters simultaneously on the same San

  We spend VSphere 4.1 to 5.5. We are very weak with only 3 hosts running about 20 comments of the virtual computer on a San.  Our former VM VCenter is always on Win 2003 and I am changing as well.

  So instead of doing an upgrade from 4.1 to 5.5 and convert the former vcenter 4.1, we decided to simply fill out a brand new VSphere 5.5 installation to a new server we have.  We have also installed a Vcenter 5.5 new appliance as well. So, essentially, we have installed two different vcenter, old and new running.  Then, we plan to move hosts esxi 4.1 existing in the new Vcenter device manually.   Then eventually fly over the guests of a host in the new box and then wipe and reload each older host with 5.5

  So I've already finished the first half of this project.  But I have a question.

  During the passage of Windows VCenter 4.1 to the new host esx and VCenter Unit 5.5. I run two VCenter (ver 4.1 and ver 5.5) simultaneously for a short period of a few days.  We're still running on the host 4.1 old and the new vcenter 5.5 running on the new esx host 5.5.

  We will walk a host both the old VCenter and will be added to the new Vcenter 5.5 appliance.  But I'll share my SAN alone of course. If I do this and the two versions of VCenter (old and new) running at the same time and sharing my data SAN even stores at the same time, are there problems with it?  I don't think so, but I'm not sure.

  I installed the first new esxi host and I pointed out to my warehouse of SAN data without any problem. And data warehouses has appeared as they should.  But when I add the new host for the new VCenter, as part of the installation process, it displays all relevant San warehouses.  I thought it was weird to show during the 'Add host' vcenter.  Are there restrictions to running two VERSIONS different VCenter simultaneously on the same data warehouses?

  Thank you.

  HMorris

  You can have multiple instances from running in the same environment vCenter server. What you need to take care of, it's that the ESXi hosts that share the same warehouses not have access to each and other virtual machines (i.e. do not add VMS to multiple hosts). Keep in mind that only VMFS3 data warehouses are available in two versions, do not pass the VMFS data store to VMFS5 when running always hosts v4.1.

  > as part of the installation process, it displays all relevant San warehouses

  That's ok. When you add a host to vCenter Server it will show that all connected, as well as the VMS data warehouses that are stored on this host.

  André

• Can the records with the same pictures are in the Organizer add? I have to start? I tried to organize photos in folders in a time better. I have to start all over again?

  I made new files so I could have a better time line, but the Organizer will not let me load them. The new files contain the same images, but they are better organized.  To add pictures in the folders I have to delete those in the organizer and start again?  I feel like I got this backward little and should have organized their first. Help.

  virginiae56248392 wrote:

  I made new files so I could have a better time line, but the Organizer will not let me load them. The new files contain the same images, but they are better organized.  To add pictures in the folders I have to delete those in the organizer and start again?  I feel like I got this backward little and should have organized their first. Help.

  The key to understanding the difference between the Organization of your files and folders directly in your disk folders tree and by organizing with a catalogue, is that the catalogue:

  -contains no image files, that links to the actual location on the disk

  -stores the links in a database with organizers strict rules, which is to avoid duplicates.

  One of the highlights of the databases such as those in the elements or Lightroom is that they store duplicate data. Which avoids not only of space useless, but also ensures that you're updating a file and forget its duplicates. As a result, the Organizer will prevent you from 'import', which is to 'index' your files several times. It recognizes the files into two criteria: the size of the file in kilobytes and the "date" of the shooting.

  The other strength of the catalogue, it's that you can select the sort order of your files displayed: by date, name of the file, import annealing in Bell or same "custom" order in albums. This means you don't ever need to have your physical files and folders sorted by dates on your drive. Try to get a similar organisation to the date on your car in your catalog can be an unnecessary pain. Good if you choose a folder structure to date in office at the time of importation; There must be little order at this time anyway. Once your photos are cataloged, the rule is that if you want to change the structure of your file, you must do it from the Organizer itself (left panel of record). This means that you are working with already imported files (you can not import duplicates). You can organize in this folder on the same panel as if you were in Solution Explorer / finder. You can either use the 'move' menu or drag and drop of folders with their subfolders, you can move the files of images to other subfolders. Beware, there are traps in doing this, for example by trying to move a subfolder in master already a folder with the same name of subfolder...

  So, ask yourself if all this work is really worth. And be patient and prudent to do this task from the file Organizer Panel.

• Firefox does not start when I click on its icon. As far as I can see, all the program files are present.

  Firefox functioned perfectly earlier today. Tonight, when I tried to start Firefox as I usually do by clicking its icon in the quick start of Windows 7 bar there is no frequency. The same thing happens when I click on the application icon in Windows Firefox program folder. Is some way this can be fixed easily?

  I ran a full scan with Norton 360, Malawarebytes and Iobit Malware Fighter, whose no is no problem. Also, I checked the settings of Norton 360 and found no problem with the settings of Firefox. I downloaded the Firefox installation files and ran a custom implemented, by clicking on upgrade. Firefox now works well with all the Add-ons, bookmarks, history, cookies and saved passwords intact.

• Sunset - Budget - why do you have the same numbers for 'Last year', 'Current year' and 'next year '?

  The figures in the income and expenditure for each year of the budget are the same. Of course they would vary, for example your salary for 2010, 2011 and 2012 will not be the same, but there is no possibility for them to be different.

  Hello

  These should help:

  Center solutions Microsoft Money
  http://support.Microsoft.com/mny

  Microsoft Money - Forum
  http://social.Microsoft.com/forums/en/money/threads

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Illustration of starting in a new Indesign doc exactly the same point as the previous

  Hello. I am trying to create work for stickers cover the front and next to a freezer.  I created the façade which consists of a block of color along the top and bottom (with the logo at the top of the page Panel), then an illustration in the middle. Now, I want the blocks of color and illustration in order to operate in full transparency on part and on the other to cover the 2 side panels (which are the same height but of different width of the Centre).  Do I have to create 3 separate documents and how can I make sure that I follow the illustration exactly in the place where it ends on each side of the central panel?  Hope this makes sense to someone.  I have not been using very long InDesign and I can't get out.  I would really appreciate if someone can help me. Thank you.

  I could do this as a discrepancy of three pages. If you disable dragging in the context menu of Pages from you can hang all three pages in a single group.

• My impressions of Adobe a line were it tell you that you must buy the program at the top of the page! I can't seem to stop, even after I got my license?, I print on: drag2PDF which has always worked! and yet I work but with this shity line

  Buy now to create a PDF file without trial watermark!

  Curiousl, Acrobat adds a watermark during the use of the test, it must be something else. All that creates the PDF file is to add the line. Contact their support.

• I have my ATV (3rd generation) connected by Ethernet to the modem. I listen to music to ITunes game on the ATV and of an old AV via optical cable. Is it possible to send music at the same time to two AirPlay speakers in different rooms?

  Apple TV by cable and Airplay audio streaming

  Unfortunately not.

• get updates same after installing just them. installed the second time. and update then said moments the same updates are availeble to install.

  Update Manager downloads updates, I already installed

  Hello

  I suggest you try the steps from the following link:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update http://support.microsoft.com/kb/910339

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.

• FF has an option for AutoComplete is a form all like Google, or full auto work only on one field at the same time?

  Is there a way of really auto complete a form in FF the way Google, or is full auto only one field both in FF?

  You can watch an extension as Autofill Forms.

  • AutoFill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/

• Use 6 s more: iPhone battery is not displayed and the time standby and use are the same, even I do not use it

  Hello. I just bought an Iphone 6s MORE and just updated to iOS 9.2 and I had this problem with applications that consume my battery is to say the list of applications that drain the battery does NOT appear when I click on settings > battery. And also I meet another problem that is my standby and usage time appeared at the same time even if I SLEEP there during the entire period. Someone of you this problem? If yes kindly share here how you can solve the problem

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again.

  You won't lose data, but which can cure some problems after installing new software.

  The same use and waiting time is a sign for some applications, always running in the background, even when the phone is in standby. Restart will force close those apps.

  The list of applications appears only when you used some applications for some time.

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert