my camera is automuting himself

Similar Questions

• iCloud library... simply does not work

  I have to admit - Im very angry about this.

  Here is my situation;

  1. when I look at my phone, all THE PHOTOS, I have 5 683 pictures

  2 when I connect my phone to my Mac, it says I have 2 389 pictures

  3. when I login to iCloud online, he said: I have 4 271 pictures

  I don't want to use iCloud photo library. In fact, I remember turning off the COAST, but during an update, he must have turned on YOU.

  And now, I find myself crossing Europe, taking thousands of photos that appear on my phone and yet when I try to import my phone to edit and publish, they actually aren't there to import and I must log on to iCloud and download them individually.

  I can SEE ALL the photos on my phone. I can see some of the photos on my iPad. I can see some of the photos on my Mac. I tried to turn off the iCloud photo library and it threatens to remove everything from everywhere. Why? They are to ME.

  I was looking for a solution online and Im so surprised that no one seems to complain about this. It is a TERRIBLE problem. I literally took photos 2 weeks ago, I can see them on my phone and now they are not available to download. I tried the programs third too and it does not solve the problem of photos exist somewhere - just not physically stored on the phone.

  Have I completely wrong? Is that seriously how this is supposed to work?

  If this is the case, it's a deal breaker. IM ready to throw my iPhone out and get something I did a master's degree.

  I can SEE ALL the photos on my phone. I can see some of the photos on my iPad. I can see some of the photos on my Mac. I tried to turn off the iCloud photo library and it threatens to remove everything from everywhere. Why? They are to ME.

  Reread the guests when you turn off iCloud photo library. He tells you that it will remove the pictures from the camera, not iCloud himself. Very different.

  Disable the iCloud on a device is not remove their icloud. Deleting photos on your phone while iCloud is turned on, does.

  Connect to icloud.com. Look in the pictures icon. It's your library. These pictures are full-size and will stay there unless you delete them so that your site iCloud.com or delete them from your phone (reduced or no version) while you always synchronize your device and iCloud. It sounds like you may have several origins, sending photos to iCloud. You can have, for various reasons, more pictures on your phone that have been synchronized in iCloud.

  Assuming that you connect all your devices using the same Apple ID.

• Qosmio F60: audio and video distortion during playback of a media file

  Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
  Purchase date: June 2011

  question: audio and video distortion during playback of a media file

  of fact steps:

  (1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...

  (2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)

  Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...

  CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >

  Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...

  > more funny when im not connected online via wifi, everything is good and ok
  Does this mean that this problem appears only using the WiFi network?
  Hmm how about Wlan driver update? Try this.

• I downloaded MapPoint 60-day trial, left for the evening while he was a free download. It took an eternity, came back and I don't know where he himself recorded?

  I downloaded MapPoint 60-day trial, left for the evening while he was a free download. It took an eternity, came back and I don't know where he himself recorded?

  If you are running Windows Vista or Windows 7, first look in the Downloads folder:

  Start > click your user account > downloads

  If this isn't there, look at the root of the drive where Windows is installed to C:\

  You can also view files such as Public downloads

  If you can't find it, try the following:

  Try to download again, but not to save, just to see where default to downloads

  Look here and get the download.

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• https without mixed content and EV cert site is shown as mixed and not as himself

  My https:orderform site page contains only images of https and the site has an EV cert which is valid and up-to-date. With history cleared page and visit for the first time that Firefox reports this page contains mixed content and that the site does not identify iteself.

  Pressing F5 to refresh the page address bar correctly shows green with no mixed content popup and that diversity side himself.
  SSLCertificateChainFile was added, and it makes no difference.
  Problem does not occur in other browsers (IE, Safari, Chrome).
  A new FF profile has been attempted, but same problem occurs.

  Why is refreshing the page work?

  Problem in all browsers firefox 3.5 to 14.01. I don't know about those < 3.5.

  I have read and tried most of the suggestions in the forum and elsewhere, but can't find a solution.

  I have not provided the url because it is my order page and it is important for me to see from real visitors.

  First of all thank you for your comments jscher2000

  I thought I had fixed it, but I had to clear the history and turn off the computer for a few more minutes for the error reappear.
  Well it turns out that this was not the difference between the direct replacement and replace().
  However this worked.

  If (xFf) setTimeout (function () {top.location.href = "https://ord.html"}, 300);

  Thus allowing any javascript code following (pending) to finish as suggested.
  I came to the same conclusion before reading your comments.

  WORKS NOW

  However the redirection on the server is a more robust solution.

• DROID MAXX camera &amp; Dock car Griffin

  I think I found a bug using the camera while the camera is embedded in the car Dock Griffin. Not a big deal, but it would be great if this could be studied, and possibly fixed in a future update of camera for the Droid Maxx. I have attached a photo of the dock that I use and some screenshots in a word document.

  Firmware: 12.7.7.obake

  UPDATE: I went and spoke with a representative of Verizon and it was able to verify this bug with an all new MAXX DROID and a brand new Griffin Car Dock it in the store. So I'm leaning towards it being a bug in the software of the camera or something that has to do with the tag NFC in the car Dock Griffin himself.

  Thank you

  Brandon

  I reported this to Matt. I saw the same thing on my Maxx. I was able to select the entire document, but it sure is not appear correctly. Thanks again for reporting this.

• The trio of Labview, card PT and Basler A - 610 camera F gray

  Hi all

  I'm doing a project on the merger of the camera with a PH d teacher. As I am the research assistant I can make all preliminary ups. in any case its very annoying that I'm stuck on the first step. Which is simply the video detection from one camera on LabVIEW. The equipment I use is an A-610f "basler" firewire camera, a gray PT 1394b PCI Express Card (http://www.ptgrey.com/products/firepro/index.asp).

  The basler connects with gray map of PT via a firewire cable. Now that the card is not an OR product it is not shown in the MAX I just need to get the video of LabVIEW, but I don't know where I have to access the camera from.

  I'm using LabVIEW 8.2.1 and I Vision Assistant and Toolkit Vision and Motion installed on my machine. In addition I just download demo version of the Vision Development module as well. Again for the clarification that I just need to acquire video from my camera.

  Finally ive it resolved myself!... .. The main problem was with the son of the late himself! .. I was amazed when gray pt was charging me $75 for a firewire cable because it was available in my country of origin for Rs 250 to the free market. I bought one and then started five days of immense struggle and re struggle. Finally, I thought that ive tried all means why not give it a last try and buy the original cable. I borrowed it from a firm surface and 'khatttaaaaaaak'... it works! Although I had to install the SDK of basler to view the video stream. Once the entrance to the camera was visible on the SDK. It was smooth then leave. IMAQ Max was able to detect the camera. The right software was all that remained to be installed. Once the right software has been installed using MAX. It was all great. The power of the camera was visible on max as well. I opened the Vision Assistant and he began to take the camera feed as well.

  I decided to transfer to another device in the PCI card and hooked to another quality firewire cable. The repeatition of above process ensures that the camera is fed was visible on SDK, MAX and Vision Assistant. Although permitted high-speed bandwidth continues to be a problem. Another problem which forced me to bite the nail outlet there is over and done.

  Moral of the story: use the original substance

• Beating of camera when scanning barcodes?

  Everyone uses the "Barcode Scanner" by ZXING app off the market from Lenovo (same thing is on GM)? When I use my camera repeatedly made horrible clicking noise to the point where I was worried it may physically damaging himself. I have E-mail ZXING and they said that development of racking/rampage is a normal part of their software, but I always have a feeling that what is happening on it not healthy (that or I have a camera that is broken).

  -FDP

  
  

• Camera cannot connect NI Max

  Hello

  I have a camera Flir A6251sc I am tying to connect in my VI using IMAQdx (it's a Vision GigE camera).  I can make it work with the Flir software, but when I try to connect with the NOT-MAX I get "error 0xBFF69011 cannot GET attribute."

  I ran the validator of the camera and got the attached files.  As the camera work with their software, Flir has proposed that the problem is probably with the NOT-MAX himself.

  Does anyone have any suggestions?

  Thank you.

  
  

• The built-in camera has worked fine for a long time and suddenly sound got very bad quality

  I am trying to use the built-in camera, all of a sudden its really grainy and has top lines when I'm trying to use it. Can I do about it?

  Katie,
  After having checked and updated the drivers, by ensuring that there are no obstacles on the screen of cam real himself and baring any change to your screen, I advise you to contact the manufacturer of the computer.
  Eddie

• Can I do the video camera automatically in my application?

  As we know, when we use the playbook to take video, we must press the record button on the screen.

  I develop an application that monitor the acceleration of the playbook, then take the video automatically, but for now I can't do the camera work himself, it should be continued by the user by pressing the record button on the display of work...

  I wonder if there are ways to make the camera take video automatically by the code in my application, not the user action?

  naveenan wrote:
  Hello

  Yes, you can. Here is the code example to show how do.

  Fake, you can't without an extension for now. What you have linked, as can be read in the documentation for this feature of the API, it will open the photo/video app and user needs to make a photo/video by themselves and in the app, it will provide the path where the taking of photo/video was stored.

  If it's not automatically, isn't. In HTML5, what you might want to use getUserMedia feature when it will be ready in BB10 in the future. For now, you would need to have an extension of such behavior, as far as I know, to use cam inline video in your application.

• First not showing changes Adobe Camera RAW?

  Once I have filed all my DNG in BRIDGE using Adobe Camera RAW and importing them in first, first does not recognize the changes.

  So overall, I can't see the color of the rank my RAW files, unless I classify them in After Effects directly which is a pain. I would also like that I can drag right to Media Encoder raw files once I have classified the but Media Encoder does not recognize changes to the bridge either.

  Any ideas? Maybe my workflow is all wrong, but it has always been easier for me with impressive results.

  These changes are saved in the metadata files, not for the mage himself.  My best guess is that video programs are not read the metadata of your still images.

  I can't think anyway to change this except to change your workflow.  Perhaps do work in Photoshop and save PNG copies.

• Camera Raw adjustment brush problem v8.7.1

  I use Adobe Bridge and my problem is in Adobe Camera Raw 8.7 and 8.7.1 himself. Click brush position slider and the actual surface that will be painted is not in the same area. As you can see in the photo below, the actual painted area is compensated on a cm off the slider you click position. Only the adjustment brush is affected. What is more, the cursor is bigger than usual and the color turns to black instead of white. Hope someone can help give a solution or if all goes well, Adobe may solve the problem.

  
  

  
  

  Hi all

  I found the bottom of the problem. The problem is the font size in the operating system that has been increased by more than 100%. To resolve this problem, change the font size in the operating system to 100%. After the change, disconnect and connect the PC and the cab problem has been resolved. Hope it helps someone in the future, who has encountered this problem. See the steps below.

  I really have to thank you everyone trying to help solve this problem.

  

• "Seems we cannot choose to" open as "a default value of Camera Raw?

  Greetings

  I have no problem with that if I, for example, you want to open a JPEG in Camera Raw, then I choose in the drop-down list box.  I learned this by

  initially through several times, then completing the action with success.  Then the drop down box comes up with the option for the rest of the session.  The next time I

  Open the items however by default is not believed but rather Photoshop PSD.

  However, we teach other people in our sessions, the use of the elements and this makes it harder to do.  Although there are many possible permutations, the

  most obvious is to open as Adobe Camera Raw.  If we want to open Photoshop PSD, then a simple 'Open' on a Photoshop PSD file will do the trick.

  Is there something that I am missing?

  Yes, it's a change of PSE12, where the "Open in ACR" option has been added in the main file menu (Windows). Instead of choosing "Open in" and by selecting the raw option in the drop-down menu, you have one click. But the ability to open multiple JPEG files at the same time is not mentioned in Adobe documents...

  I thought about my workflow where I deal with half raw, half jpegs. Open each jpeg in ACR makes sense for several reasons:

  -Better and faster global edits in 16 bits

  -Parametric Assembly (non-destructive)

  -Ability to apply the same changes to a batch of photos

  -ACR default settings most often improve bad photo exhibition

  -Once 'edition' in ACR, JPEG images will automatically open in ACR opening of the Organizer.

  However, it is still not perfect and does not replace the absence of the option to open the cab to the Organizer himself. Even if it's a batch (as with the DNGconverter) operation, this is an extra step. And another problem is that in the PSE12 Organizer, you cannot update the thumbnail with the changes of the cab. So, I chose to systematically create a version that works very similar to the 100% Preview in LR. Working from the Organizer I know not if I edit from the original or that of the whole of the version.