My canon eos 30 d flashes too powerfully and whiteing my photos can someone help
Hi all
When I take pictures my eos 30 d is too powerful for automatic photos I take and whiteing on the subject
I looked in my manual and can't see the answer
If the device worked properly, then started to overexpose in mode auto, most likely, you have changed some settings...
Go to the menu, select and use 'all clear camera settings. You can also go into the custom functions menu, select and click 'Reset all custom functions'.
As a last resort, you could do a "reboot" of the camera. It's a bit like rebooting a computer to clear incorrect instructions that are stuck in the memory.
To do a reset, first turn off the camera, then remove all of the batteries, including the money bit "battery memory" which is in a drawer inside the main compartment. Turn on the camera and press the shutter button once. It fires without batteries, of course. But this drains any residual power in the circuit.
Turn the power off, reinstall the batteries and turn it back on. Check the date and time. If you got a restart appropriate, they should be set to zero.
If you do not have a proper restart, you can use the same procedure, but instead of pressing the shutter button just leave the battery for about an hour. This should allow any residual power to drain it and cause a complete reset, too.
It can erase some of the settings you have made inadvertently, causing problems. Or it can erase a statement stuck in memory, string just as restarting a computer clears its memory and help it work better. (After all, devices digital photo is essentially the laptops. )
You might also consider relocation (upgrade, if necessary) the camera firmware. Sometimes, it can be damaged and giving problems. If you go to the website of Canon and research for 30 days, in the software category and downloads you will find the latest version of the software for the camera and instructions on how to install it. Follow the instructions carefully. It is not difficult, but it must be done according to the instructions, or there is a risk of "bricking" of the camera.
Finally, it could be a bad communication between the camera and lens. Some flashes use data of distance from the lens to help the force of the power of the flash. Remove the lens and clean the contacts. Usually the best way to proceed is to wipe the contacts Golden at the rear of the lens with a clean cloth which is slightly moistened with a few drops of isopropyl alcohol (rubbing cheap alcohol is fine). Just pay attention to leave the lens optics and do not touch the mirror inside the front of the camera or the screen right above the mirror.
Also, you can check the pins 'spring' corresponding to the contacts on the lens to work correctly. Gently press on each spindle and watch it springs in place. Sometimes, these can be sticky, causing problems of communication between the camera and the lens.
Factory default of compensation and/or reboot the camera that you will lose a few other settings you did and you will need to go into the menu to manually redo all the parameters you use regularly.
All these are things you can do yourself and which costs nothing to try. They may or may not help. If so, great. If not, you will need to have a repair technician look at the camera. Either find someone local who can work on it or send it to Service Dept. Canon
***********
Alan Myers
San Jose, California, USA.
«Market softly and carry a great lens.»
MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & REPROGRAPHY
Tags: Canon Camera
Similar Questions
-
I bought a new ADobe Photshop that is too powerful for my computer I can downgrade
I bought a new ADobe Photshop that is too powerful for my computer I can downgrade my 5 Lightroom key
@
What os you have, and it is 64-bit?
http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html
-
the adobe flash plugin failed and none of the solutions have helped
the adobe flash plugin failed and none of the solutions listed in the section help objects! I tried all the solutions listed, but none seem to work.
This has happened
Each time Firefox opened
He started a week ago ==
Why Flash is now so unstable in Firefox? Flash broke down indicator is now a familiar visitor (it's usually when I refresh the page isn't extremely mortal!) But... I'll have to go back to IE to check the reliability with my own sites - which are heavily dependent on flash for animation and video. What can we do? My installations of Firefox and Flash are updated. Really disappointing.
-
"Signature" page is ok, but the Inbox etc is too smal for see and I would change it.
Thanks a lot to v!
-
I find the brightness of the screen more and more difficult to treat as my old eyes. My glasses are apparently ok for my eyes and my view has not changed but the glare of the screen (also the glossy magazines have become an impossibility) allows to work on a very difficult computer. Can I change the background around any writing Iincluding in outlook and in forums like this) to something like a pale cream which does not glare. Also I can't see boxes around where you type text because they are too pale.
Hi Gardenmummy,
Follow the methods below:
Method 1: Try to change the resolution of the screen and check if it helps.
To change your screen
Method 2: If the method above is not enough, you can see the following article for more information.
To change high contrast options
To turn on high contrast
Hope this information helps.
-
Can someone help me with a printerdevice, namely Canon i550, in windows 8 x 64?
Hello.
I am struggeling to use a printer with Windows 8 x 64. The printer is a Canon i550.It seems that windows sees and it lists under printers inkjetprinter, but I can't update the driver, or set as default (the default is).It is connected to the pc by usb.I hope that it is possible to get answers or help here on this forum.ConcerningBjarteI had the same problem. Cannon confirmed that there is no Windows 8 driver for this printer and that, although they work to add drivers more "because of the age of this printer drivers support will most likely not be added" [emphasis added]. So unless you want to wait in case they change their mind, it looks like a new printer is the best option.
-
I have a new mac that came with Adobe Flash, but now I need to update and I am not allowed to. It freezes at 30%.
What can I do? I tried following some answers that I found here, but the links do not work.
Help, please!
I have actually managed to do work now. What I did to go looking for adobe.com for adobe flash player, go to that link and it automatically told me I need to update. I updated and it worked. What did work was directly on the adobe download site.
Try it. I hope this helps you guys. (the download is the version 14.0)
-
Can someone help me solve the problems Flash install on my iMac and Macbook please?
OS 10.7.5
Safari
On both machines the installation program runs, starts to download the update, is from 7% for about 30 seconds then skip to 47% and abandons the download with the message 'download timeout '.
It's exactly the same thing every time. I tried to uninstall the previous version of Flash, but it made no difference.
The things that machines have in common are:
-they are on the same network, sharing the same internet connection
-they are running the same version of the OS and Safari (with the exception of the differences between the iMac and Macbook versions)
I don't know what to try next. Any ideas?
Thank you
Hello
Could you please download Flash Player from the following link: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#install er
After the download, close all browsers and double-click on the downloaded file.
Thank you
Sunil
-
We had AVG security at the same time and then tried to stop her. He will not stop and keeps saying things like "...". has stopped working"whenever I turn on the computer, etc..
Hello JaneSeavers,
Have you tried to use the AVG Remover tool? http://www.Avg.com/ww-en/utilities this should remove the AVG application. Remember that it is important that you have some sort of anti asks of viruses on your PC. A free good is Microsoft Security Essentials (MSE) http://www.microsoft.com/en-gb/security/pc-security/mse.aspx
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Here is the screenshot of the sample.
Hello
Greetings!
Try changing the user interface scaling to 100%, and then restart photoshop.
Measures
Open Photoshop
Change-> Preferebces-> Interface
Change the UI scale to 100% of the car.
Concerning
Jitendra
-
Images showing red blue spot and they are not sharp at all - Canon EOS 600 d
Hello
A month ago I bougth Canon EOS 600 D with 18-55 mm and 55-250 mm lens and everything is fine I capture images of the Moon and wildlife photography.
But now I am facing a problem with it.
Recently, I tried to capture pictures with my Canon EOS 600 d and suddenly, I noticed that the pictures are not sharp at all and the images show task red and blue. I don't know what to do I'm just an ammature in the present.
Please can someone help me with this problem.
It is chromatic aberration, it's a type of distortion that exists in all optical components to a certain extent, but varies depending on the lens. In general, the less expensive lenses will be more CA, especially something like the kit lenses. You'll notice more in high contrast situations, like a brilliant white on a black background. You can fix it to a certain extent in post with programs like Lightroom or Photoshop.
-
RAW converter for canon EOS 5 d R
Hello
is a new RAW for Canon EOS 5DsR converter available for Photoshop CS6? Where I can get it and where can I find a manual for the installation?
Thanks for helping me!
Have you tried help > update ?
Have you checked help > about plug-in > Camera RAW ?
-
Import of *. Files CR2 for Lightroom 3.6 - support for the Canon EOS 70 d
Hello
try to import *. Files CR2 for my new camera Canon EOS 70 d to 3.6 of Lightroom, but it is not supporting format. What should do? Can someone help me. Thanks a lot for your answers, your Petr
3.6 Lightroom does NOT support the 70 d. You need to go to LR 5.2 or convert the CR2 files to DNG using the free DNG CONVERTER from Adobe to use it in 3.6
-
MS Office 2007 too slow and cannot be uninstalled
Hello
I want to uninstall my MS Office 2007 trial version that came with my new laptop (Vista OS) and install my version of Word 2000 instead. After 4 weeks of trying to use I would say that it is simply too slow, also in conjunction with other software I work with. Apart from that I have not the time and courage to familiarize myself with the completely new design.
Unfortunately, it can be installed in the usual way. Can someone help, please?
Thanks in advance!
Tony
Hello
Have you already checked the knowledge of MS document that describes how to remove this software?
Perhaps, it might be useful.
[How do I uninstall Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs ' | http://support.microsoft.com/default.aspx/kb/928218/en-us]
I'd appreciate comments after reviewing this doc.
Concerning
-
MS installed sp2 on my computer.
Now, HP Color LaserJet 2840 all-in-one printer, connection direct usb does not print word documents.
HP printer displays "Page too complex" and prints a blank page.
USB connected to the printer is established, proven and fully functional until installed sp2.
I have...
computer restarted, then tried
have disconnected and reconnected printer 110 AC, then,.
printer unplugged 110 AC and USB, computer connection, rebooted, then,.
removed from all printers in the control panel and the computer restarted, the printer is displayed as connected, but,.Always get the error message "Page too complex" and printed white page.
Help, please.
Hi livelabel,.
Please use the forum for answers,
You can uninstall all the driver/software HP printer utilities. Visit the HP Web site for the last download driver and utility, reinstall them after rebooting your system.
Also contact HP any known issue with SP2 for your printer model. Make sure that file for the print job size is not greater than the printer can handle.Let us know if this helps, Kevin
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
PowerEdge Raid700 in RD540 with ESXi Thinkserver
Hello I'll put up a hypverisor 5.5 ESXi update 2 on a lenovo RD540. There is a RAID700 controller. I use 3 HARD drive in a RAID6 configured with the tool of the bios (Mega RAID LSI) The server works fine, but I don't see the healthy of the RAID on th
-
How do you add device to your existing Apple ID?
I'm unable to connect my iPOD shuffle to my current ID of Apple.
-
My laptop is not recognizing that it is the CD player so I can't burn or play discs
I am trying to burn a disc from a playlist on Itunes, but it gives me the message "disc burner or software not found". I also tried to play a cd in windows media player, and he's not playing. It's like my phone forgot that there is a cd player?
-
Help, please. I am trying to download short videos (3-5 min.) to send customers to Amazon. I download from my SD cards, I change and then try to send them to Amazon, but it does not work. I know Amazon said that 100 MB is the maximum that I can down
-
How can I change my e-mail address by default on the Mail App
I changed my e-mail service provider and change the "mail App" default to my new provider. When I click on the Mail App ' envelope on the windows screen it goes to my old email address.» How can I change my default e-mail address