My Canon PIXMA MG6320 will support two computers with two different access points?

I have a laptop connected to the router and modem satellite exceeds at home and a laptop connected to a router/modem with internet service from Verizon LTE wireless in the same House.  I would like to print on my printer Canon PIXMA MG6320 of two laptops.  Is this possible?  Whenever I try to connect my printer to a second access point, it rolls too one that was already there.

Thanks for confirming my suspicions, merrymary247.

Tags: Canon Printer

Similar Questions

  • I have a Pavilion p6540f. Who will support two monitors?

    I have a Pavilion p6540f. Who will support two monitors? It has outputs two DVI and VGA, but I get conflicting advice in searching for internet information. Should I install a new video card? My 250 watt power supply will support another video card? Thank you.

    Thank you very much for the information and your quick response.  I have a new HP monitor on the way.

    Take care.

  • My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

    My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

    Hi set231,

    When you install a new driver, it is recommended that the PIXMA MG6320 is not connected to the computer.  Please sign in when prompted during installation.

  • The A53 8980 will support two monitors?

    It is unlikely, but it's always good to ask: if I install a PCI-E graphics card in an A53 8980 will I be able to use the two VGA ports now available (the other being out of the motherboard) to run your desktop bi-ecrans tense?

    See you soon!

    More card graphic card can support two monitors, a vga and one dvi, an expensive have 2 x dvi or dvi + hdmi, etc...

  • Canon PIXMA MP160 error message 'cannot communicate with scanner.

    I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

    Installation scanner said that all the files are in place until it reaches the end.

    I received an update of windows on 31/10/2011. It works

  • Will the concept AD LDAP Referral supports two different forests

    Hello

    I have areas DomainA under ForestA and DomainB in ForestB. I would like to implement the concept of LDAP Referral for these two areas, so I have set up between these two areas and add a crossRef under CN = Partitions for DomainA and trying to search for DomainB users using ldp.exe DomainA.

    But it seems to not work.

    LDAP Referral Concept is supported in my case?

    I read somewhere that ads supports LDAP Referral for domains that are in the same forest, is this true?

    Can someone help me with this? Please let me know if I am missing any configuration.

    Thank you

    Phani

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Canon Pixma Pro10 will not load any document in the manual feeder

    I just bought a Cano Pixma Pro io. Have spent the last 48 hours trying to load paper A4 inkjet fine art 225 g among others. He absolutely refused to accept any document. Don't want to force it because it's new printer anf his goes back if I can't solve this problem. Can anyone help!

    Its a new day here in County Kerry Ireland and I want to thank the guys who responded to my query.

    He was misreadding the terminology. I was selecting the quarterdeck and not the manual feeder.

    Complete stupidity on my part.

    I printed my first art print and hope that it will be the first of many.

    Great forum! Syra

  • My Canon Pixma 270 will not be printed. Not saying message queue

    A suddenly stopped printing. Does not recognize the printer is connected. Should I buy a new printer? Have re booted my laptop, printer, run again rebooted installation disc. Indicates the queue is not all that means.

    Hello

    -Did you change on your computer before the show?

    I recommend to restart the print spooler service and check if that helps.

    I see an error message about "spooler" problems

    (Not valid also for Windows Vista)

  • A special web page "expires" 2 different computers with 2 different browsers.

    I have 2 computers in my house. Both are running Windows XP and have both Internet Explorer and Firefox 6.0.2 browsers running on them. Last week there was a question on both computers at the same approximate time. There is a web/blog site that I went on an almost daily basis, and then all of a sudden last week I was unable to connect to this page of computers or browser. Now all I have is that the page "timed" out I tried the rattling of the web from a command-line prompt and it 'timed out' it as well. I checked that others can still access the page and I talked to my ISP and they swear that they do not block. I use the windows firewall and AVG antivirus. I searched everywhere and can not determine the cause. I am able to access the rest of the internet without problem, as far as I know. Any ideas out there?

    Hello

    1 of IE are. what version you referring?
    2. have you made changes to your computer lately?

    Follow these steps and check if they help.

    Step 1:

    I suggest that you click on "fixit" of this article and check if that helps.
    Internet Explorer error "connection timed out" when server does not

    Step 2:

    Perform the System Restore to the point that your computer was working normally.

  • Wired router with POE and Gigabit ethernet to run two AC1750 access points?

    Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

    I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

    Many thanks to you all.

    I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

  • How to extract elements from two different descriptors-point?

    Hi all

    I have a requirement for all elements of trade based on a property in the trade section and order status should be presented.

    Status of the order is in order and trade item to the article of commerce property.

    is it possible to ask about two descriptors of the order of the day, if possible, please provide a solution as soon as POSSIBLE.

    Thanks in advance

    You only need commerceItems based on a trade item property and a property of the order. as referential point trade point has the associated command point reference thats why it is feasible with the POOR. You should search the descriptor CommerceItem point OrderRepository. Your POOR query would be like yourcustomProperty is equivalent to "xyz" AND Decree. Status equals "SUBJECT"

  • PS B110a - wireless configuration will fail if the network has multiple access points

    Photosmart B110a (CN245B) wireless AIO printer.

    I have several wireless access points using the same SSID to provide coverage over a large area. When you install the printer on the screen TouchSmart wireless installation fails. Print report reveals the following error:

    "More than one access point/router wireless was found which matches your network name (SSID). If this is not intended, your HP printer can connect to the wrong network. »

    In my case this IS planned but there seem to be no available option to answer "OK, just connect to any point of access by using my SSID.  If I turn off all but one the APs configuration complete OK. If I have to do every time I turn on the printer the printer is USELESS for me.

    Did I miss something?

    sijomi

    This should not be a problem.  I have a B110 (and another 10 or so HP wireless printers) on a network of airports with 5 access points and they just connect.

    Here are a few suggestions:

    1. don't use WEP - use WPA or WPA2 with a 13 + character password.

    2. enable the SSID broadcast on all access points

    3. do not use the MAC filtering acddress

    4. make sure "AP isolation" or "isolated wireless" is disabled.

    5. make sure that you are not on a private network, virtual, or connected to your network of comments.

    6. If different strings on access points do not work, try the same channel.

  • Canon pixma ip4000 printer works only with Windows 8.1

    Separated from this thread.

    Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1

    I can't find any driver support to the Canon Web site.

    Is there any solution for this?

    Looking forward to hearing from you soon.

    Thank you

    Hello Chit,

    Thanks for posting your query on the Microsoft Community.

    I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.

    Step 1: Download the drivers from the Canon Web site.

    http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

    Step 2: Installing the driver in compatibility mode.

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    You can also provide the following link to check the compatibility of the printer.

    http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

    Follow the Microsoft articles as reference and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

    h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

    It will be useful.

  • Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

    I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

    Hi marsha3236,

    To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

    If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

  • El Capitan is compatible with Canon Pixma printer?

    The new Mac OS is compatible with Canon Pixma printer

    It is compatible with my 3 printers Pixma Canon's (MP830, MX922, Pro9000)

Maybe you are looking for

  • Dictionary by double clicking on a word in the text don't work at IOS 10

    Since yesterday I installed IOS10 in my iPad Pro, when I read an e-book and I double click on a Word, there is no option. I closed the application and he straightened, closed the iPad and turned back on and the problem persists. In iBooks, the screen

  • Offset by typing in Pages on the retina Macbook

    Hi all I am running Pages 5.6.1 on a Macbook to the retina (i7 Quad 2.6 ghz, 8 GB RAM), on 10.11.4 (El Capitan). I have a boring typing lag in most of my documents, that gets worse if I have the Panel "track changes" open. Any suggestion? I find it s

  • Do not print in black

    If you have a problem with Black print does not, try the following steps... It is necessary for the following printers Photosmart 5510-5520, 6510, 6520 3070, 3520 DeskJet OfficeJet 4600, 4620 (1) check the ink levels & replace empty cartridges. (2) c

  • Satellite L650 does not detect wifi networks

    My laptop Toshiba Satellite L650 ceased to detect wireless networks.It shows only Dáil and vpn... The wireless network is not detected.I was able to connect to the network using my phone, so something was wrong with the laptop. I also checked if the

  • Is posible use el mismo Subvi Clone en UN mismo Diagrama de Barr?

    One of the Sub - VI that he created lo utilizo en varios del become blocked, donde kinds information referring a ese diagrama of blocking. Para el mismo Subvi lo como he defined prealloue using clone re-entrant execution, esta forma, referring inform