my canvas is now a new window?

Hi, I'm new to photoshop and I did something and my drawing is in another window! I use mac and these small upper-left circles which are green and yellow red are all white and my canvas is in another window! How to fix this?

Hi alaskaarei,

suggest you go to the window menu in Photoshop > suits > consolidate all to tabs

Tags: Photoshop

Similar Questions

  • Why can't I open a new window now? I prefer a new window in a tab.

    I like to use Mozilla, I like also to open a new window, as opposed to a tab (it's just me I guess). I must now W control to open a window - cannot bring back open it? (and I still don't have the private window).

    In case you have activated automatic private browsing, you can use the Options dialog box to turn off.

    "3-bar" menu button (or tools) > Options > privacy

    Change the menu drop down of "conservation rules: don't remember history ' to ' Firefox will be: use the custom settings for history".

    Then you can uncheck the box for automatic private browsing.

  • Don't know what happened, but now, everytime I open a new tab, a new window opens that contains the same information as the tab.

    Don't know what I did, but now, everytime I open a tab, the tab opens as it should, but it ALSO opens a new window containing the same information as my original window. (same tabs, etc.) Almost a duplicate of my original window. I searched everywhere for a solution, but fails.

    Hello

    The reset Firefox feature can solve many problems by restoring Firefox to its factory default condition everything and save your essential information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

    Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

    That may be a problem with the DDE.

    Try to undo and redo Firefox as default browser.

    Make a different browser like IE browser by default and then let Firefox do it again.

    See:

  • New problem, Lycos Mail is my home page. When I open a new window I usually get the Google search, which is what I want. Now, somehow when I open a new window I Yahoo search. How can I change to Google? Thank you, Randy

    New problem, Lycos Mail is my home page. When I open a new window I usually get the Google search, which is what I want. Now, somehow when I open a new window I Yahoo search. How can I change to Google?
    Thank you
    Randy

    A new window opens by default with the homepage.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

    MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

    Read this: upgrade Windows 10 Dell Latitude D610

    Take a look at my answer, complete instructions.

    Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

    However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

    If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

  • my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

    my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

    Hello

    You tell us what type of license you have.

    If the former was preinstalled, NO, you cannot transfer it.

    Read this information:

    If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

    OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

    The above applies also to OEM system builders licenses.

    License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

    And retail licenses also can be installed on a machine at one time.

    ___________________________________________________

    And please read this, you can:

    http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

    See you soon.

  • I added LR6 to a new PC and flies over the catalog of my old PC. Now, the main window in the modual development is blue. The photos are visible in the modual library. Why?

    I added LR6 to a new PC and flies over the catalog of my old PC. Now, the main window in the modual development is blue. The photos are visible in the modual library. Why?

    Clear the option use the GPU in the performance preferences tab.

  • I bought Photoshop elements 12, it is installed on my Apple Mac, which I have now decided to sell.  Now I have a new windows pc and want to transfer photoshop on how I do this, I have the serial number

    Can anyone help, I bought Photoshop elements 12 and installed on my Apple Mac, I bought a new windows pc now and would like to transfer Photoshop on.  I have the serial number and tried to find out how to install it on my new computer, but do not seem to get anywhere.

    I understand (I do work for Adobe), it's that if you bought the BOXED version at a store there both install media and your serial number to work for Mac and PC

    If you purchased via download, you get a version only and must buy the other version you change Mac <-->PC

    Since version 12 is no longer sold, you can buy version 14

  • FF seems ot now open several windows on start up. Even on a new laptop. How can I change to just opeining my homepage?

    A few weeks ago FF started to load several pages (tabs) at startup. I treid a lot to Pompeii and nothing is even on a new machine does. I'm sure it's a setting but after and + hours of research, I am obliged to migrate ot Chrome. Prefer to stay if there is a quick fix and I'm not sense enough to understand. Please advise...

    It is best to open a new window with only this tab if you want to use the "Use current Page" (note that Firefox adds the ' pages if more than one tab is open).

    Also, you should be able to drag a tab or the "Site Identity" (globe/lock) button on the address bar on the Home button to set this tab as homepage (you need to confirm this).

  • I can't open windows in a new tab. My setting are correct. I used to have several tabs, but now everything what it opens in a new window. Help!

    Even when I click on the tab with the sign '+', a new window opens. I want just the tabs to new windows. My settings are set on open as tabs. I restarted.

    It is possible that you have an extension that is interfering with the normal operation of Firefox. Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

    and just to confirm, in Options > tabs, what are the options you put there?

  • Recently, I changed my motherboard now, today, I get "this copy of windows is not genuine" that I have to buy a new windows to fix this?

    so jve had this new mob for nearly a month and today I received the message, to solve this problem, I have to buy a new windows 7, copy is authentic as the hard disk using a store bought pc im, im not exactly rich just go and buy a new windows at the moment as im still in school.

    Thanks in advance

    you have two problems:

    1. you use an Acer OEM SLP key on a motherboard retail. that does not work.
    2. your license is OEM and cannot be transferred to a new motherboard.  (the only exception is specified replacement manufacturers had to make defection)
    If you have a certificate of authenticity windows 7 you can try to change the product key of your COA and activate by phone. There is a chance that they will be activate it for you.
    OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates

  • I can't get my Trust Canvas Widescreen Tablet runs on Windows 8

    The case is as follows. I tried to install my drivers Trust Canvas Widescreen Tablet on my Windows 8, but he does not even launch MacroKey Manager or anything like that. I can't have the sensitivity to pressure and I don't want to buy a new tablet, just because I updated my operating system.
    Someone knows what to do?

    I solved my problem with downloading different Widescreen tablet drivers and now the stylus pressure works perfectly! Here are the drivers if anyone else has this same problem!

    Trust.com - Wide Screen Design Tablet (TB-7300)

  • Make a new window to repeat the image?

    I have an image I want to tile seamlessly. So I do the shift-thing and clone. What I want to do now is to open a new window with the same image (window > reorganize > new window) filename.ext and tile then windows (Arrange > tile), but also make the new window to repeat the image so that I can see the changes I do reflect in repeated picture so I can get rid of unwanted habits. I hope I'm not too vague about my question! Thank you!

    antevante wrote:

    Thank you very much for your answers! I don't quite have it works as I wanted it well.

    Can I sort my left of the window to display my image in a State not tiled so that I can change it while my right window shows the same image but tiled and zoom out and updates when I make changes in my left window? It's kind of a pain in the * to change my image, then copy and pasting in a table. Then go back and editing, table again. It is a problem even with an action. There may be other applications texturing for this type of workflow, but I thought that I was so close with the new feature of the window in PS

    For the update part, you can use dynamic objects. There is a setting of the clock which is more complicated, but then you can use as a template for future work.

    I just did that myself and describes the steps:

    Create a canvas with a size that will fit perfectly plenty for example 1000 x 1000 to fit 100 places with the size 100 x 100.

    On a new layer in the upper left corner, create a square of 100 x 100 with a color or an image.

    Right click on the layer with the square of the Layer palette and choose Convert to smart object.

    Hold the Alt key and drag the layer to the Summit 9 times the total of 10 copies of the layer.

    On the Web, make sure there is no selection and drag with the tool moving one of the squares overlapping snapping at the top right of the Web (it's easy to align with the limits of the Document is checked in the view > Snap to menu).

    In the palette layers shift, click on the first and the last layers to select all layers including the place.

    Make sure that the move tool is selected and in its options at the top of the screen click on the button "Distribute Horizontal Centers" (the third from the right side).

    While all segments are still selected in the layers palette, press Ctrl + G to group them.

    Reproduce and distribute the Group vertically you duplicated the squares in the same way but using the button "Distribute vertical centers" instead. However, Alt + click - move a group does not work on a document with nothing else that a single group, and I had to reproduce the first group by right click on it and choose duplicate. Then you can Alt + drag and drop between the groups.

    If you want, while all groups are selected, press Ctrl + Shift + group, ungroup and then Ctrl + group for organizing all the squares in a group and you're basically with the initial configuration.

    Now, edit a tile and update the image.

    In the Layer palette, double-click the icon of the any of the Smart layers with a square and this will open the place in its own window.

    Change, create, or paste the new image on the image of this window and when you save this will update all the tiles in the other window.

    Where not sure, when you change the place of the active layer, you can also use the Filters > other > horizontal shift and Vertical 50 pixels and for undefined areas, check Wrap Around. to help you to create a seamless tile. It creates seamless borders and all you have to do is to eliminate the seams in the middle with cloning or the paint tools.

  • Some Images open in a new window or tab are backwards or rotated 90 degrees,

    Some Images open in a new window or tab are backwards or rotates 90 degrees, but they appear in the correct position when you use Internet EXPLORER.

    I don't even know if it's a browser or a browser-server interaction problem. The problem manifests a certain user forums where members post jpg images that appear as thumbnails. "I can right-click and select"Open in new window"or open in a new tab. Either way some images open OK, some open pivot 90 degrees out of position sometimes upside down. If I use Internet EXPLORE the same images will open on the right side.

    computer: Dell Latitude
    OS: Windows 7 Pro
    Browsers: Firefox 41.02 / MSIE 11.0.9600.18059

    MysteryTech said

    Not in bold. Looks like this:
    Layout.CSS.image - orientation.enabled; true
    Status: default
    Boolean type

    Laughing out loud! But if I double-click on it replaces:
    Layout.CSS.image - orientation.enabled; false
    Set of users of status
    Boolean type

    Now when I right-click the image and select either "open in new tab" or "open in new window" the image is right-side up!

    Thanks to you all!

Maybe you are looking for