my card 802.11 network has been disabled

Similar Questions

• Message 'internal network card has been disabled to optimize the battery life' will not go away.

  Whenever I have unplug my laptop, the message "your internal network card has been disabled to optimize battery life.". Lately, the message doesn't go away, even when I plug my laptop back in. When I move my cursor over the message, it is an icon of mouse 'pending' for me and I am unable to click on it. I believe that this is due to a virus or accidentally modify me a file, but I don't know which and I don't know how to get rid of this problem.

  I knew it was a Dell and find out how to disable the message (which is supposed to appear), but do not know why, when you connect what you are disconnect, the message does not go far - she used to go?  It seems to be a useful informational message and not an error message.

  I can't seem to find information on your system on the Dell WEB site to check your network drivers, so I hope someone will have the magic bullet for your situation.  There are the user forums on the Dell WEB site where you could ask your question to be read by all people of Dell.

  If you think that malicious software might be involved, I would start with this:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Peer-to-Peer (p2psv) service has been disabled by the network administrator

  Original title: activate p2psv?

  Then the diagnosis why networking group residential is not operational, Network Diagnostics came with the comment "The Peer to Peer service (p2psv) has been disabled by the network administrator", with a statement that an attempt to activate this failed.  As the only Admin, I did disable any service that I am aware and can not find how to enable it.

  If anyone can help?

  Hi Rattlingroger,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions and see if it helps.

  Method 1: You can run the Homegroup troubleshooter.

   

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

   

  Method 2: Make sure that the following Services are started.

  Service peer networking grouping.

  HomeGroup provider service.

  a. click Start.

  transfer the search box type services.msc

  c. right-click the above services and go to Properties.

  d.Select Automatic for the Startup type of the menu drop down.

  e.Click Start and then click on apply and OK.

  f. restart your computer.

  Method 3: You can follow the procedure in the article.

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

   

  See also:

  Homegroup

  http://Windows.Microsoft.com/en-us/Windows7/products/features/HomeGroup

  Let us know if that helps.

• My network firewall has been disabled for some reason.

  Original title: NetworkFireWall

  My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.

  My network firewall has been disabled for some reason. And I don't know how I start it again? When I look in the action center you can activate it again I find and I press Activate and nothing happens? So my action center do not work? Or what it is - this? Help, please.

  (1) you have a third-party security software installed?
  This could be due to that... What are the analyses of different viruses that you already have... It may be a product of firewall or security of third parties that interfere the windows firewall, disable one by one your security scanners and try for windows firewall

  (2)if you do not have these installed firewall products, this could be due to malicious software or some other problem...

  If you have an antivirus up to date solution its definitions and do a full scan of the system...

  If you do not have an antivirus solution, or one does not work, use one of the recommended tools (use only one at a time)

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  And/or
  http://www.Malwarebytes.org/products/malwarebytes_pro/
  And/or
  http://www.simplysup.com/tremover/download.html (shareware)
  And/or
  http://www.McAfee.com/us/downloads/free-tools/Stinger.aspx
  And/or
  http://www.Kaspersky.com/free-virus-removal-tool

  If this also isn't that the problem may be that your firewall service is damaged...
  
  (3) open a command prompt run as administrator and type sfc/scannow

  (4) try to fix the firewall service
  Run the tool repair services by ESET
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe

  
  And/or
  Download and add this firewall Windows registry entry - download.bleepingcomputer.com/win-services/7/MpsSvc.reg
  (If you find difficulties to add to the registry to refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html)

  And/or
  Open a command prompt using run as administrator
  and copy - paste these
  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
  and press enter

  (4)(run as administrator) command prompt, type netsh advfirewall reset , and press "enter."

• Just upgraded my iOS 9.3.1 ipad2 and my cell phone has been disabled. ATT has checked the settings and changed the SIM cards. This can be corrected?

  Just updated to iOS 9.3.1 on my ipad2. My cell phone has been disabled. This can be corrected?

  I have the same problem

• Wireless LAN has been disabled

  Model #G60-549DX laptop computer

  [Edited by Moderator] Serial No.

  Product #VY794UA #ABA

  Windows 7 Home Premium (64-BIT)

  Wireless LAN has been disabled

  It is not in the BIOS

  I tried every download on the HP site

  I have cannect to the internet by cable but not wireless.

  Laptop had to be restored to factory settings and now Wireless does not work. It worked before. Wireless light is only amber color and willnot turn to blue.

  Hello:

  If your model has an Atheros wireless network card, see if this driver resets the internet connection.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

• My account has been disabled.

  I'm sorry I've been the first origin of the request, until this ID is disabled I learned there are illegal gift cards, I really is the first time, understand nothing illegal map, I agree Apple to punish me, I accept the lesson. I will later buy the illegal gift cards. Please return the ID's sentence to me after the sale. I am deeply sorry for the trouble I gave you. Please tell me what I should do now.

  < image edited by host to remove personal information >

  We are other users, these are forums of users, Apple and iTunes Support aren't here.

  Depending on why it has been disabled, then reset the password could fix it: If your identifier Apple has been locked - Apple supports

  Next, you need to log on and your account each time you use it: what to do when you have changed your Apple ID email address or password - Apple support

  If that is not set then contact iTunes Support and see if they can / will reactivate: https://www.apple.com/emea/support/itunes/contact.html

• OfficeJet 8620: OfficeJet HP 8620-"Web Services has been disabled!"

  About 6 months ago I bought an OfficeJet 8620.  It worked fine for 6 months.

  It is connected via WiFi using a DHCP address, and the network as the scanning options to the network folder and Web admin are working very well.

  I can access the printer Windows 10 PC, iPad Pro and 27 "iMac with OSX 10.

  I decided I want to enroll in the program HP ink instant - so I tried to enable it.  Through the web administration page, I discovered that 'Services Web has been disabled!   Please contact your administrator or the person who set up the printer.

  Any attempt to install or activate the web services (either through the admin web or printer) translates the same error.

  I have reset the printer to factory defaults and the error is the same.

  I'm completely unable to implement web services.

  I don't know what should be the next step.

  Welcome to the Forums of HP and thank you for your efforts so far @Hexland, I accept the challenge of helping you get this to work.

  From your description of the issue, and what you've already tried, I think it would be best to reset the most complete.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  Please take a moment to read the privacy policy of HP to http://www8.hp.com/us/en/privacy/ww-privacy.html this privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online business is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Wireless communication has been disabled

  I have the same problem that many have already posted for my HP Officejet 4620: wireless communication has been disabled.  Can someone send me the solution?  Thank you!

  Hey @nworbgerg,

  I would like to help you today with the message "wireless communication has been disabled" on your HP Officejet 4620 e-all-in-one printer. There may be a special reset required on your product and I can guide you through. However, first of all can I have you check your wireless menu to see what options appear.

  How to enable wireless:

  1. On the front panel of your printer, down arrow for the network Option and select OK
  2. Under network are you able to down arrow for wireless settings, then select OK?
  3. If you are, can you select OK on wireless and make sure that it is set on YOU

  If you are not able to access this menu by the message "wireless communication has been disabled" on your control panel, please check your private Messages. I will send you a private Message with the reset in which should allow the solution wireless for you. Once you try the procedure described in the private Message, don't forget to view the result of the steps in this thread and not in the private Message other users of the Forums of HP's Support could benefit from our help desk.

  Good luck!

• Error message: Wireless Communication has been disabled - HP OfficeJet 4620

  Hello

  I have a printer of HP OfficeJet 4620 network.

  All of a sudden the wireless light goes off, and whenever I try to turn it on by pressing the wireless button I get the followig message: "wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  If I try to access the network settings by going to the Setup Menu > network, I get the same exact error. I see it too if I try to print a network status page.

  I also tried to restore the default values, but that did not work.

  I am trying to find a way to reset it completely, but I can't find one way other than the default settings in the settings menu.

  Any help is appreciated.

  Hello

  Please check the Inbox you private message.

  Thank you!

• Task Manager has been disabled by the previous administrator. How can I activate it?

  Task Manager has been disabled by the previous administrator. How can I activate it?

  Here is the procedure.  You must be logged as an administrator yourself to make this work. http://www.vistax64.com/tutorials/103275-task-manager-enable-disable.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Skype account has been disabled and I can't answer the questions for re - activate

  I wonder to indicate the year that I created my Skype account, which I do not remember. I also wonder to provide credit card details. I have only ever paid for Skype calls for a short time, a long time ago so I don't remember the details of credit card that was used.

  The website says there is a cat of support, but after following all the links just to send me round and round in infuriating circles.

  Does anyone know how to contact a human being using Skype? Even if only by e-mail, or by raising a ticket online?

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that your Skype account has been disabled and you want to contact Skype support. I will certainly help you to the query.

  I suggest you refer to the mentioned below link and check if this is useful:

  How can I contact Skype Customer Service?

  https://support.Skype.com/en/FAQ/FA1170/how-do-i-contact-Skype-customer-service

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• registry editing has been disabled by your administrator

  When I try to change my registry, I get this message "registry editing has been disabled by your administrator".

  How can I solve this problem? Thank you very much!

  Hello

  The computer is connected to a domain or network?

  This type of problem occurs generally when the administrator restricts other users to make changes to the registry. To remove it, you need to modify group policy and for that you must have administrator privileges.

  Group Policy settings can be performed only on Windows 7 Ultimate, professional Edition and Enterprise Edition.

  Try the following steps if you have administrator privileges and the editions are:

  a. click Start, type change a political group in the search box and press enter.

  b. open the Group Policy Editor.

  c. go to Configuration / Administrative Templates/System user .

  d. see the strategy, prevent access to registry editing tools.

  If the computer is connected to a domain, it would be best to contact the domain administrator for assistance.

  Hope the information is useful.

• My ID apple has been disabled and I can't restore it because I forgot my security question, please help

  My ID apple has been disabled and I can't restore it because I forgot my security question, please help

  I can't update my iphone because it will need for my apple for activation ID. Please help me.

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts