my cd rom and dvd rom will not installed I win windows startup.

CMOS configuration shows the cd and dvd

Hello

1. when the question is is produced?
2. don't you make changes to your machine before the problem?

I suggest that you follow the steps mentioned in the article and check if the problem persists.

Your CD or DVD drive is missing or is not recognized by Windows or other programs

Tags: Windows

Similar Questions

  • Security Essentials Client update pkg 0x8004FF84 error code. KB2691905 will not install on my Windows XP

    I keep getting a prompt to install the automatic update, and whenever it will not install, I have included the error code and update of information.  I tried to us Microsoft Fix It, but that did not work or another, can anyone help.  Thank you

    Hello

    Are what fixit you referring?

    Method 1:

    Run the System File Checker (SFC) scan and verify.

    File system (CFS) Checker
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Method 2: Try to reset the windows update components
    How to reset the Windows Update components?
     
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

    Also read the following article:

    You are prompted to upgrade Microsoft Security Essentials in version 4

    http://support.Microsoft.com/kb/2691905

    If the problem persists, try to post the question on the following link for assistance:

    http://answers.Microsoft.com/en-us/protect

    Let us know if it helps!

  • Software CyberLink will not install on Win 8

    H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
    Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

    Hello

    Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

    Any suggestions on why Cyberlink programs will not install?

    Thank you

    Hello

    Check the compatibility of your products from Cyberlink here.

    The HP position maintenance for Cyberlink is only an update.

    If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

    BTW, nice PC.

  • KB2656353 security update will not install on my Windows XP despite many attempts

    This automated update will not install on my XP PC. Many other updates, before and since that have installed successfully. I would appreciate any advice. Thank you.

    Salvation of the heartbeat,

    I'm Kosh, although I use a quote from PA bear instead of writing a separate response (and I knew you meant) - but what is important, is that I'm happy that it worked and glad you are facing up and running.

    You are very welcome - it was my pleasure.

    Thanks for the comments - it is most appreciated.

    Good luck and best wishes!

  • iTunes will not install. error message: Windows error 126

    Original title: iTunes won't install... I'm not the only one apparently...

    Windows dear community,

    iTunes will not install.
    I used to have it on my laptop Sony to 64-bit, but not more.  Messages displayed are: @AVFoundationCF.dll is missing "or"cudt36.dll is missing"or"Error 7 (Windows error 126)"."iTunes cannot start"etc." I tried to uninstall or repair iTunes, but nothing works.
    I am reluctant to watch the registry etc. that I'm not qualified. No simple solution that works please? Thank you.
    Geoff

    Hello

    Thanks for posting in the Microsoft community!

    I'm sorry to hear that you have the iTunes installation issue. If I understand correctly you get a Windows error 126 error code when you try to install the iTunes. Please correct me if I'm wrong.

    The problem is specific to iTunes?

    Run the fixit and try to install iTunes.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/program_install_and_uninstall

    System File Checker

    System File Checker will try to help you in fixing all corrupted files and folders from the computer.

    Please click on the link below:

    http://support.Microsoft.com/kb/929833

    Error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found.

    http://support.Microsoft.com/kb/959077#appliesTo

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry) how to back up and restore the registry in Windows.

    I suggest to remove every trace of iTunes and other apple and utilities to the computer software and try the re-installation.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    You can also check this link.

    https://discussions.Apple.com/thread/2735255?start=0&TSTART=0

    If the problem persists, then you can contact Apple support.

    http://support.Apple.com

  • CD and DVD player will not open or read

    My USB does not open. I got the message no program associated with the file.

    I reformated the by the advice of Verbatum USB flash drive.  Now the Flash Player works fine, BUT no optical drive will not work.  I can insert a disc into the CD or DVD drive, and it won't play.

    I can click on one of the icons for the drives in my computer and they do not open or play.

    I need help to solve this problem.

    I have Windows XP Home Edition and running IE 8 with all the updates of Windows and IE.

    Help please.

    You can try AutoPlay Repair Wizard from Microsoft here:

    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c680a7b6-e8fa-45C4-A171-1b389cfacdad

    Download the tool... click Next and select cd/dvd drive and try to open it and such.  Then click on begin Test, and you might find an answer to your problem.

    ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

    I suggest this one below

    Even better...

    http://support.Microsoft.com/GP/cd_dvd_drive_problems is Microsoft Fix it... It will run a diagnostic tool on your 'question' click on this link and it will take you just

    What it fixes...
    • Your CD or DVD drive does not read or write and is shown as disabled
    • The media in your CD or DVD drive cannot be read
    • The media cannot be written for your CD or DVD drive
    • You receive one of the following errors:
      • A specific class or a specific device driver is missing or damaged
      • A CD or DVD drive is not found or is not connected
      • The CD or DVD drive is faced with a problem which does not work properly
      • The CD or DVD drive is not accessible via a drive letter assigned
    How it works...
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then
    Automatically solves the problems that it encounters, and

    Offers additional resources if the problem is not resolved
  • Windows edits 972145 KB and KB 973540 will not - install error 800b0100 message

    There are two updates will not be installed on my laptop. (Vista 32-bit). This is the only update where I have a problem.

    Have you tried a problem with preparation system detected no effect tool

    Problem of Windows and reports show the following

    Update Windows failure - o/s. 7.4.7600.266, 2057 792711406 bucket and bucket 748412871 locale ID

    I also have the failure of maintaining Cbs 6.06.6002.2.2.0768.3 package parameters ID 2057 regional bucket 682643163

    Any suggestions as to how I can fix this?

    Some troubleshooting methods mentioned in this article
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/e21cbdbb-49ce-4057-b289-f2182a85c87f TaurArian [MVP] 2005-2010 - Update Services

  • code 66A and code 8024200d will not install updates

    will not update

    Hello DennisRagland,

    Thanks for your post.  If please see Andre poster in this thread and let us know if it does or that it does not help to solve your problem.

    See you soon

  • LabVIEW 2010 will not install on Win XP SP3

    I have made several attempts to install LabVIEW 2010 on Win XP SP3. I already have LabVIEW 2009 installed and working.

    On each attempt, I accept the default installation options and do not put in a serial number. The first attempt got stuck at 2% full and has not changed for 30 minutes. No error message. I canceled the installation and tried to install it again from setup.exe.

    The next two attempts to stall at 0% blinking forever. The 4th attempt made in 18% entered at a standstill for more than 30 minutes. The next two attempts is stagnating at 0% repeating and not cancel. I had to end it with the Task Manager.

    Why it not install LabVIEW 2010 without stalling until 30 minutes? Why it not spit an error instead of just stalling? How can I know why he moved?  How should I do?

    I finally got to LabVIEW 2010 to install.

    I didn't have a corrupted download. I didn't disable my antivirus. I didn't have a lot of processes running. I turned off my computer last night and I tried the setup.exe again this morning first thing. Maybe running LabVIEW 2009 yesterday before installation left something that the installation did not like. Who knows?

    How is the installation of LabVIEW 2010 would just stall for long periods (more than 30 minutes, maybe forever) without any error message or progress?

    LabVIEW has a Setup log that I could look into these situations to see where the installation is suspended up to and perhaps why?

  • Manager of Apple mobile devices will not install on my windows 7 x 64 dell xps studio laptop

    ITunes does not recognize my iphone 4. I reduced the problem to not install the Device Manager. She cancels and install it when I install itunes. I tried clean boot installation, reinstall itunes, separately install the AMD, install versions old iTunes and even tried to use the windows Device Manager to try to detect the iphone camera driver and install this way, but without success. Is there a way to get the AMD installed without having to return to x 32?

    Success! I completely uninstalled itunes again after uninstalling the 5 step and delete all files. Created a test administrator account, and then restarted. At a clean boot, and then restarted again. Then downloaded the new 10.1.2 itunes for 64-bit. Then installed itunes on the test account. It worked.

    Thanks to persevere on this with me.

    God bless you

  • Keyboard Microsoft wireless & mouse 2000 will not install drivers in windows 8

    Got the keyboard, a mouse for over a year. used with my old computer to windows 7 and had no problem. Now I'm trying to connect it to my new computer with windows 8, and it does not install the drivers. I changed the batteries too, please tell me what is happening!

    Got the keyboard, a mouse for over a year. used with my old computer to windows 7 and had no problem. Now I'm trying to connect it to my new computer with windows 8, and it does not install the drivers. I changed the batteries too, please tell me what is happening!

    Control that the mouse/keyboard works in another system... d

    If they work in another system

    (1) try to upgrade for your system chip set drivers, go to your motherboard manufacturer and search the drivers nessasry for win8

    (2) find the compatible drivers / fixes system with the manufacturer of keyboard mouse... wireless mouse must be connected via bluetooth. so have you installed the necessary drivers for bluetooth?

  • ColdFusion will not install on a Windows 2008 Standard Server for IIS 7.0 running in VMWare.

    In the final step "Configure Web servers/websites", he complains that - "cannot configure IIS Connector. Select the required options, ASP.NET, CGI... ».  But, ASP.NET, CGI, and ISAPI all connectors are installed and configured.  We installed Coldfusion on more than 40 servers, since version 7 to 11 and that you have not seen this problem before.

    Hi Jim,.

    You get this error only if the IIS features above are not installed. I'm sure you launch the web as an administrator, even though server configuration tool that shouldn't contribute.

    Can you take a screen shot for these IIS features and share.

    Kind regards

    Anit Kumar

  • Dimension 4550 DVD-ROM and DVD-RAM will not read disks

    My daughter has a Dimension 4550. The engraver has recently left working, so we replaced it with a Lite-On DH-20A4P-08 DVD - RAM drive. We played a couple of moview and a CD on the new drive. Today the old DVD-ROM new DVD-RAM both refuse to recognize that a disc is in the disc (DVD or CD); He says: no disc in the drive. We have checked the cable connections and updated the driver for the new drive with no luck. We also tried the Dell store without success.

    Any other ideas?

    How to run diagnostics on these discs?


  • I have 10 windows and application manager will not install help

    Windows 10. LICENSE STANDALONE Photoshop CS6 and bridge.

    I've owned Photoshop for many years and version.

    I had to reformat my computer and reinstall photoshop.   Photo shop works without the updates.  Bridge does not load.   I tried to update and tried APPLICATON Download Manager, but it would not be installed.  Tried to move to the line without success.  Older versions of bridge will partially work.

    The problem seems to come from the Application Manager does not and work.

    Other information:

    Hi ejemas42,

    Please follow the steps below:

    • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
    • Disable the firewall of your machine, see OS x: about the application firewall - Apple supportWindows Firewall enable or disable - Windows help -
    • Turn off the firewall of the security program installed on the computer Internet.
    • In Mac: Go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

    Most of the time, its a problem with the download was not successful or downloaded correctly. So, in this case, re-download the software and do not forget to compare the file size of the file downloaded with the file on the server.  Download Creative Suite 6 applications

    Allows you to check in this case as well and make sure that the download is complete, if the size of the file is correct, to the install.log file.

    Navigate in the log files in one of the following folder:

    Mac OS: / Library/Logs/Adobe/Installers /.

    C:\Program Files (x 86) \Common Files\Adobe\Installers\

    The name of the log file includes the name of the product and installation date, followed of ".". log.gz."the .gz extension indicates a compressed format.

    You can use WIN RAR to extract the 7z or gz file:

    WINDOWS: http://www.rarlab.com/rar/winrar-x64-531.exe

    MAC: WinRAR download and support: post-Télécharger

    Once unzipped, the log file is a text file, open the .log using TextEdit (Mac OS) and notebook (OS Win)

    Scroll to the bottom of the log. Look in the section - summary - for lines that begin with ERROR or FATAL and signals a failure during the installation process.

    Copy and paste this section SUMMARIZED here so that we can check for errors. Alternatively, you can analyze the logs yourself. http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html

    Let us know if that helps.

  • Software HP Photosmart full feature and the drivers will not install on my new laptop 64 bit of Windows 8

    I can download the driver on the site but when I go to install it, I still get the same error message. I have a screenshot of the error below.  Once I click OK, everything is uninstalled and I have to start all over again. What can I do to solve the problem?

    The print doctor corrects the printer part and I am able to connect to the printer wireless and printing, but I still haven't access to the scanner because the center of Solution is not to settle.

    Any help in this matter would be appreciated.

    I'm sorry you have a problem with the installation of the printer.

    Here is a link that can help you with this problem.

    http://support.HP.com/us-en/document/c00836418

    Let me know if it helps.

Maybe you are looking for