My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
John

Besides what abdelhak says:

The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

Hope this helps,

Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Laptop does not work after you remove the virus win32/winfixer

    Original title: win32/winfixer

    I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

    Hello

    1. what exactly happens when you start on the desktop?

    2. you get any error message?

    3. is your laptop work fine in safe mode?

    4. What are you trying to download?

    5. How are you trying to download?

    6. What is the full error message do you get?

    7. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Method 1: How to fix a computer that does not start.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

    Hope this information is useful.

  • His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

    No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

    Any help will be much appreciated. Thank you.

    As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

    Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

  • Sound of the laptop does not work after 20-30 minutes

    What happens to my new laptop Toshiba too! When I start and press the volume keys, they work fine, but if I start up the laptop and then later lets say after 20-30 min, I press them, they do not work!

    Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/why-Don

    Hello

    You can view the documentation for Toshiba to learn how.

    http://forums.Toshiba.com/T5/general-features-knowledge-base/Toshiba-Flash-cards-aka-hot-keys-fn-keys-operation/Ta-p/336470

  • Computer Toshiba laptop does not work after the lid slam... Help please!

    This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

    In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

    As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

    Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

    Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

  • Tecra A9 - network does not work after wake up from the sleep/hibernation mode

    I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
    Keep it light, but there is no network and to solve it, I need to restart the laptop.

    Any help please.

    Kind regards.

    This is a known issue so take a look at this site:
    http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

    Updated the BIOS, and then it will work.

  • On my trackpad scrolling does not work after the upgrade to 12.0

    On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

    Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.

    Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

    After that upgrade from Vista Home Premium to Windows 7 - I'm unable to connect to my router (Netgear WNDR3300) - message network States "the settings saved on this computer for the network do not match the requirements of the network" - any ideas what could have changed during the upgrade to make me lose my connection to the wireless router?

    Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • CD/DVD drive does not work after 8 Win instalation

    Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

    When I put the blank cd and try to open it, it gives me error when opening by saying:
    "windows could not complete the format".

    Who's a software or a hardware problem?

    waiting for help!

    This means that your CD/DVD drive no longer works and is not recognized by the system?

    If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

    + Why my CD/DVD drive does not work after upgrade to Windows 8? +
    http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

    You must uninstall the programs from Toshiba:
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator

  • my graphics driver laptop does not work on the 8.1 window when I go from window to window 8.1 8

    When I update the 8 to 8.1 window window my graphics driver laptop does not work.

    I am not able to see vedio and not able to change the brightness of the screen...

    I download and install the graphics driver for window 8.1 from your Web site, but it also does not work...

    When I start the laptop, the error message is showed that no amd graphics driver not located or does not properly.

    my laptop model No. is n003tx in this model 1 GB amd radeon 8670M graphics driver is attached...

    Please help me as soon as possible.

    Hi Kushal

    Sorry to hear, by me, these two things do not seem to be connected. However, we can do many things...

    ----------

    1. If you can, restore the system to the date before the problems. It should solve the problems.

    ----------

    2 uninstalling drivers AMD and Cattalyst driver. Restart the computer and update of HP SAssistent, it is a friend more important your computer.

    ----------

    3. If you had already done so, download and run your computer support page chipset drivers - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5422962#N222

    You need drivers chipset right because it allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    -----------

    4 Please, thry hard reset - procedure

    http://support.HP.com/us-en/document/c01684768

    and that win refresh

    http://support.HP.com/us-en/document/c03538721

    ------------------

    I don't know that he should fix the DIF. Please, let me know, by my side, I wish you good luck and good luck!

  • How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

    How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

    Hi brandong13,

    Here are the steps that you can follow.

    1 change the location of installation using Creative Cloud Desktop App, go to preference > creative cloud > Apps and change the installation location.

    2. delete the folder '%Temp%' and restart the process.

    NOTE: Application is downloaded to the default location, we can only customize the installation location using creative cloud app in this case.

  • Satellite A200 - 1 M 7: the sound does not work after the downgrade to XP

    Hello!

    As in the topic I have a problem with my sound card - it simply does not work under Win Xp (under Vista everything worked).

    In Device Manager I have two 'points of inquiry:
    -Controller\ PCI memory
    -Unknown device
    I assumed that the unknown device is my sound card, but still can't make it work :/

    I've already upgraded the bios and install page of toshiba Realtek drivers.

    Really need help.

    Adrian

    Hello

    No sound after installing XP operating system. What to say man I searched here in the forum similar threads and it seems that it is a common problem.

    But you worry about don t; I think that I found the key ;)
    After installing win XP, you must update the latter State. Install all the patches and hotfixes provided by Microsoft. You must use the website to update Ms. The tool on this page checks the system and selects all necessary updates!

    Very important are the patches; KB888111 and KB835221
    These hotfixes must be installed before installing the sound card driver.

    The Realtek sound card driver can be downloaded from Toshiba or on the official website of Relatek page.

    By the way; It is very important to install drivers in the correct order. On the Toshiba page, you will find the installation instructions. So please follow the guidelines mentioned in this doc.

    concerning

  • My laptop does not work on battery even though the indicator said there are 90% of the available power

    original title: laptop BATTERY

    My laptop does not work on battery even though the indicator said there is a 90% power disponiblesLorsque it is plugged in and charging. The battery would be dead even if she says she can still exist?

    Hello

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
    RESTART which will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • updated my driver for my Ethernet controller and now it does not work

    Original title:

    Network network network Ethernet device

    I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
    to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
    a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

    Hello

    You can try the following steps and check if it works:

    Method 1:

    You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

    Restore a driver with its previous version

    http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

    Method 2:

    If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

    It will be useful.

  • Why the highlighting of text in a PDF document does not work after you save the file

    Why the highlighting of text in a PDF document does not work after you save the file

    What application you use to highlight?

Maybe you are looking for