My CD rom is no longer visible in windows Explorer in my computer.
Could someone please help with the following query.
My CD rom is no longer visible in windows Explorer in my computer. I tried to go to new hardware in the control panel and couldn't find it.
I ran the diags toshiba and considers that it is and says its fine.
Any advice on the resolution of this problem would be highly appreciated.
Thank you B
Hello
You must remove the upper and lower registry key filters.
First remove the CD/DVD drive device manager.
Then go to the registry and remove the filter top and bottom of this key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
After this reboot of the laptop.
For more information, check this:
http://support.Microsoft.com/kb/270008/en-us
Tags: Toshiba
Similar Questions
-
Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager). I have reset Photoshop like application default for jpg files, rebooted. Nothing has changed. The ideas people?
Hi R_Kelly,
Hidden folder/file settings was the first place, I checked and kept checking each new reboot.
I have copied below my temporary solution I posted in another forum thread.
See point 7. I found a way to make it visible again.
1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.
2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10. I've never had a problem of invisibility of file before winning 10 update. My hidden files were always checked to be visible. However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".
3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".
4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.
5. the problem occurs only with Photoshop jpg created after the Win 10 update.
6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects. I kept the visibility settings files in this way since the early 1990s.
Temporary fix below *.
7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their. Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory. I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.
LizzyD
-
10 blackBerry phone not visible in Windows Explorer - post 10.3 upgrade
I installed 10.3 on my Q10 without problem, given the mix icon and decided to install (after using the work of passports), so a number of things...
1 mix downloaded now--but it wants to install on a f - that would be the Q10.
2. when connected via USB (or wifi) Q10 is not visible in Windows Explorer (it was fine to the point 10.2)
3. can we see the riders started to install, but then he restores and a 'installation failed, cannot find f' appears.
4 is intended to flow in Q10.
Anyone got any ideas I can try?
Found, go to settings > networks and connections > Services connection > USB and drag it to the position USB mass storage Mode on. It will then display as an Ext. hdd in Windows Explorer.
-
Vignette to locate some ppsx files are not visible in windows Explorer
I have windows 7. Thumbnails for some of my .ppsx files are not visible in Windows Explorer, while the other .ppsx files are visible as thumbnails. I have attached a screenshot to show that 8 .ppsx files, 6 display their thumbnails while the 2 only.
Try this option. Open your file in PowerPoint. Then go to the file menu. To the right, choose Properties, and then view the advanced properties:
Make sure that the image 'Save Preview' is turned on:
-
Hard drive is no longer visible to windows 7 ultimate x 64
Hi all
I'm a MSDN. I have a number of virtual machines that I work on.Last night, I had two running virtual machines and failure at the same time. They go on my F drive.
Restarting the PC drive F is not visible to windows. I'm guessing that there is some sort of failure on the drive.
I was looking around and found advice like going to disk management and rescan etc. No luck so far.
I tried to switch the machine on in the BIOS, but in the bios ASUS, I do not see the mentioned drives.
Can someone point me to a good article on how to diagnose the drive suddenly disappear like that with a failure suspected of some sort?
This must happen a lot. I'm surprised that I wasn't able to find a good article detailed on google.
I hope it isn't a catastrophic disk failure.
Please accept my thanks in advance for any help you can be in this case.
Best regards
Peter
Hi Peter,.
The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forum.You can follow this link to ask your question:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Computer infected with the virus. USB drives no longer appear in Windows Explorer.
Original title: attack viruses, help...
My friend has a computer that is running windows XP. She asked for help on what to do when several virus has infected his computer.
I tried my best, but the virus has turned off. The Task Manager, msconfig are impossible to perform. the computer had a virus which is the reason why it continues to be infected. The last scan I made from a usb key which has been infected to leave the computer has revealed five different viruses and worms, each of them spread through usb drives. It's the worst case of infection, I had ever seen. I tried to scan with the scanner but it did not work. The computer crashed, and when I turned it on things have become much worse. USB drives no longer appear in the Explorer, the computer reads no more and the old xp theme has disappeared, his running today on classic. Help me please.Please follow the steps below:
On a friend or a member of the family computer, download the files installation and update Malwarebytes from the links below, copy them to a CD or a flash drive, then transfer the files on the problem machine and use them. If you cannot start the computer in 'normal' windows, try to install, update and running AFTER the computer scans are started in Mode safe... I use the sites below to download the installation file and the manual update:
Once downloaded and before moving the machine to the problem, rename the Setup file "mbam - setup.exe" to something like "Gogetum.exe", and then copy the installation file and the update on a CD or a flash drive file... Transfer the file to the problem machine, install the "Gogetum.exe" file, and then run the update for the current program... After that, run a full system scan and delete everything it finds.
Install Malwarebytes-download link (by clicking the links below will immediately start the download dialog window.)
http://www.Malwarebytes.org/products/malwarebytes_free>
Then download the SuperAntispyware program and the manual update of the links below. After you run the Malwarebytes tool that above, if you still cannot download and install directly from the problem machine, download it to a friend or a family member computer as well. After installation and update SuperAntispyware, run a full system scan and delete everything it finds as well. As before, you may need to rename the Setup file for the Setup program. :
SuperAntispyware
http://SUPERAntiSpyware.com/superantispywarefreevspro.html>
Update of the manual of SuperAntispyware
http://www.SUPERAntiSpyware.com/definitions.html >
____________
Power Eraser
http://security.Symantec.com/nbrt/NPE.aspx?lcid=1033>
Stinger
http://www.McAfee.com/us/downloads/free-tools/how-to-use-Stinger.aspx>
UTC/GMT is 05:20 Monday, April 2, 2012
-
my product key is no longer visible to windows 7 and I need!
I have installed the preview of windows 8 and want to go back to my previous version which is windows 7 and it has been already installed I don't have a cd for it and the product key is not visible on the bottom of my laptop.
Is the brand of my laptop: Hp Compaq Presario CQ62
My software is: Windows 7 (64-bit) Home Premium edition, but for now is Windows 8 Preview of consumer
Just download free generic ISO of Windows 7 64 bit Home Premium & install & update drivers according to the needs of HP driver support downloads then visit this thread to solve the activation.
2 benefits:
1 > no fees & no waiting for recovery media
2 > cleaner, faster more up-to-date install, much better than the installation of bloated HP & next to the installation of recovery default needless waste of hard drive space...
-
Satellite P100-347 - DVD player is no longer visible in Windows XP MCE
Hello. My DVD players seems to have disappeared from within Windows MCE running on my P100-347. BIOS can see it, it opens and closes without any problems and the light comes on as if the disc is read, but it is not considered by Windows as a disc.
I installed the DVD - RAM drivers on the Toshiba site, but this did not a bit of difference. Any suggestions?
Hello
Have you checked STRANGE State in the Device Manager?
Some yellow exclamation points appear in Device Manager?
Could you please give some info on the error message?I found this useful Microsoft Knowledge base article:
http://support.Microsoft.com/kb/314060/en-us/Maybe it helps.
-
DVD/CDR is no longer visible in Windows 7 and unusable
I don't know what I should do to fix this problem. That's what shows when I go into devices and watch the cd I tried to restore the previous system, but that did not fix it. It is in a Dell laptop running Windows 7, any help would be greatly appreciated that the DVD is not usable as is.
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).
Hello
Check with Dell Support, their online documentation, diagnosis and ask in their forums
on known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/===========================================================
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
These however is a possibility depending on which and how many you have installed.-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
PX1393E drive external HARD not visible in windows Explorer
Hello world
I just bought an external DRIVE for my Toshiba laptop no disc PX1393E. I know that its old and he still has windows 2000 SP4 on it.
Now my problem is that my laptop does not recognize the external HARD drive. The Add New Hardware Wizard works fine, but I don't see the new drive in windows Explorer.
I looked in the FAQ of the guide. Here, I tried to go into the options of storage since rigt - click my computer in the management options. But I still don't see the drive.
Now, I wanted to see if I could find some update of the driver or something, but man you can't find on this site.
Anyone?
TIA
The drive cannot be partitioned or formatted.
Reach:
Start-> Control Panel-> administration-> computer management tools-> Storage-> disk managementInitialize the disc and create a partition then format it in NTFS
-
Clip + - music files preloaded not visible in Windows Explorer
Hello
just got my new Clip + 4 GB. I plugged on the Windows 7 computer in MSC mode. In Windows Explorer, I see the complete folder structure and few files in the root folder. Explorer displays as well as the used space on the CLip + is 238 MB. However, all the files look empty! I can't find any single file of the music to the player. Can someone tell me how I can find these music files?
Thank you very much!
The music of the sample appears only when the player is in MTP mode. Files placed in a mode can not be seen in the other in windows Explorer. If you love music, you can make a backup of it. It cannot be downloaded if it is accidentally deleted...
-
Disk hard online, but not visible in Windows Explorer
Hi guys, I need a little help.
Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.
My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.
In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)
I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?
Here's some more information about the system:
OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)
BIOS: Phoenix AwardBIOS review 1.0.18
Motherboard: Foxconn G33M02
CPU: Intel Pentium Dual-Core E2140 1.6gHz
Memory: 3072 MB DDR2 SDRAM
First HARD drive: 250 GB Hitachi SATA sister
HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")
GPU: ASUS EAH4670
And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649
And I just use a SATA to Molex cable I found to convert the power.
Thank you
Hello
Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.
I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.
-
Start long time and window explore is not responsible for problem
I've upgraded to windows vista 7(32bit) but failed to see the magic in windows 7. I use a laptop HP 60 G with 1 GB of RAM and 160 GB HD startup is slow, applications frequently hang, Windows Explorer not responding not time in Vista when I open several or even an application. now, when a program crashes, I usually type my pad like 5 to 6 times a Windows Explorer view does not display if poster, then choose from the options that appear, but this look was surprisingly out of pure frustration led to something but I don't like the gel. When I check my RAM used in the process window is 70 to 88% in standby mode when I run programs sometimes use of approaches 99%. The CPU usage is less than 10%, surprisingly, the shot is more severe when the RAM is at 45%. What is happening with my laptop or windows 7?
Hello
for the slow start follow my guide here to follow up on startup:
http://www.MSFN.org/Board/index.php?showtopic=140247and compress the boot_BASE + CSWITCH + DRIVERS + POWER_1.etl 7z and RAR and transfer it to your Skydrive and post the link here. I take a look at the trace, maybe I see what's wrong with your Windows.
You should also try a clean install, not an upgrade of Vista.
André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Public records that are not visible in Windows Explorer
A couple of days, when I tried an attachment to an e-mail, Public Documents didn t appear. Normally it is under Documents, next to My Documents. But now the Documents contains: My Documents and Documents (C :). And that the Documents (c) contains a folder named MAGIX_Video_deluxe_16, (paying) video editing software. This folder contains subfolders with nothing in it. In any case, I just moved because this isn't a big deal, as I find the search bar hollow. Later this program is not only happened with Hotmail, but also with Microsoft Office.
But now he also started to happen when I open Windows Explorer. It's huge because no irritation only me, but my family also uses public records files a lot. Can someone help me?Edit: If I access public Documents hollow C:\Users\Public\Public Documents, the files are there. It's that when I access the files with Windows Explorer.Try this first,
Then, open the site link,
If the Public location does not appear browse it and click Add.
Remove anything but my Documents in the example in the photo,
Repeat for the other categories.
-
Until a few days ago, this problem didn't exist - I know. My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager. It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer. It allows to open/close, etc. and when it is visible, I am able to open the drive and see the contents of the CD. Then it disappears again. The light flashes indicating that he works and I can hear it trying to read the CD. I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work. I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck. Any ideas? The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Maybe you are looking for
-
Tecra M9 - does not start after memory upgrade from 1 GB to 3 GB
I am trying to upgrade my M9 memory with little success. I bought a 2 GB module which is the same existing brand and spec to the 1 GB module, but the PC will not start no matter what options I try. So far I have tried: * Addition of 2 GB for the acco
-
We receive information such as the Latitude and Longitude of a receiver Garmin GPS18xLVC via a serial port on our PC using LabView 7.1. Successfully, I connected the GPS on the serial port and tested with HyperTerminal. I tried reading GPS time, Po
-
No installed network controller driver
Dear Experts,I have recently installed windows 8.1 on my Dell Inspiron 14 (3421), but now I don't see any wifi networks on my network list. Simply, there is are no wifi now. But, I can connect to the internet via an Ethernet cable. Previously, I was
-
Upgrade error blackBerry Smartphones BBDM 6 software
I connected my Bold 9000 from ATT to 6 BBDM and chose to update the software of the device from 4.6 to 5.0. I got the following error: An error occurred when downloading software for your device. Please check your internet connection or try again lat
-
Formatting of pages that read from right to left
HelloI very often get the Japan indd files and their formatting of page to read from right to left. Whenever they give me the files, that it is already set up and it is very convenient when preparing to print or export to PDF. However, for the life o