My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

Thank you guys

A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

Good luck!

Tags: Mac

Similar Questions

  • "automatic update service has stopped working" when you try to install the software

    I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

    OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

    Good luck...
  • External network drive helps to work with Time Machine

    I did research on my brain for the last 2 days on this subject, because I have to remove a ton of material from my laptop before he goes kaput (spoke yesterday on another post)

    Here's the plan... I think so:

    I want to move photos, films (home movies not DVD) and the iTunes library from my MacBook Pro to an external HD attached to the wifi router, so I don't have to be hard wired to access photos, music, etc., then at home.

    I want to continue using Time Machine to back up a) my laptop and b) the files moved to the external hard drive.

    This will require a SECOND external drive.

    My understanding is that this is possible if the SECOND external drive is connected ONLY to an 802.11ac Apple Airport. No other wifi router will not work.

    The airport could be connected by ethernet to an existing Netgear wifi router that Comcast installed in order to manipulation of our home security system.

    Is this possible? It is frying my brain.

    Or...

    I do one) get a time Capsule 2 TB,

    (b) plug on the Netgear

    (c) to charge all my top media and

    (d) connect a 3 TB drive in the time Capsule to back up what is on it and my laptop?

    Does it work?

    It kills me.

  • when im running a software auction I have error message containing LGB and MFC Application has stopped working... What is the problem?

    Everything started happening a few weeks and now it happenes every time I enter live auction... anyone knows maybe what's the problem?

    Hello

    1. is the issue limited to this particular software?

    You can try the methods provided below and check if the problem persists.

    Method 1:

    Run the program as administrator

    (a) right click on the system of transfer of Pes Version and select Properties

    (b) click on the Compatibility tab

    (c) under the privilege level, put the check in the box for run this program as an administrator

    (d) click on apply

    Method 2:

    You can try to uninstall and reinstall the software and check if the problem persists.

    Try the steps in the link below to uninstall a program.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    To install a program click on the link below.

    Install a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  • Satellite A60-652: ati2dvag driver has stopped working

    Hello

    Recently, I have a few problems with my graphics. My satellite freezes and goes to a low resolution with a few colors. A message indicates that the ati2dvag driver has stopped working. After that restart of the satellite shows a blue screen and restarts... same thing happens. Only stop and try again after a few minutes made me return to the normal Windows.

    I tried to look for new drivers, but I can't indicate my model (SA60-652)... is this too old model for the updates?

    Toshiba SA60-652
    ATI MOBILITY RADION 7000 IGP
    pilot ati2dvag (6.14.10.6430)
    Windows XP (SP2)
    AVG virus scan
    Hitman Pro anti-spyware
    ATI hydravision installed but never used :-/
    Laptop has recently increased temperature... I'll deal with that after my final thesis (May 8)

    Please can you help me?
    If you can, please be made clear in the instructions, "I don't know much about computers caus... (PEBCAC)

    Thank you!

    Hi Jeroen,

    I think that your problem is related to overheating rather than a defective display driver. The idea here is that it takes several attempts to reboot, giving the unit time to cool.
    I suggest that you try to remove all dust and debris from your radiator and see if it improves the stability of your units.

    You can download a copy of your display driver of: -.

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

    Kind regards

  • The screen flashes and goes out, error: "intel graphics driver has stopped working".

    Original title: Intel graphic driver

    My computer screen starts flashing, then goes and then this message appears "intel graphics driver has stopped working" when I try to get the answer it says "windows cannot download solution at Thøis" I tried a lot but he continues to themselves, what can I do?

    Hello

    (1) when encounter you the problem?

    (2) have what troubleshooting measures you tried?

    (3) remember you to make changes to the computer before the show?

    You can try the following methods and check the status of the issue.

    Method 1:

    Configure the computer to clean start State to check software conflicts.

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

    Method 2:

    Uninstall and reinstall the display adapter drivers.

    (a) start Control Panel, click hardware and sound and then click Device Manager.

    (b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.

    (c) in the dialog box confirm the device removal, click OK to start the uninstall process.

    (d) when the uninstall is complete, the site of the factory driver download and install the drivers.

    (e) after installing the drivers, install the latest updates.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

    My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

    What should I do to solve the problem?

    Hello AletBotes
    Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

  • Adobe lightroom problem: tried to install this program, run it, and he said automatically adobe lightroom has stopped working

    I tried to install this program, run it and it indicates automatically adobe lightroom has stopped working and I have to close the program. I tried to uninstall and reinstall the program and the same error occurs.

    Thus, it seems that the graphics cards drivers must be updated.

    I suggest you to visit the site of graphics card manufacturer and update the drivers for the graphics card.

  • Satellite M50D-A-10W - display driver has stopped working while gaming

    Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
    When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

    I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

    Rare Hi

    This message is certainly created by the installed graphic card driver.
    I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
    In most cases, this should fix problems with gambling.

    Greetings

  • Qosmio G30 - DVD-ROM drive has stopped working

    I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

    He still pulls in, but it will not read or burn discs.

    I received a quote of £360 Toshiba to adapt to a new one that seems generous.

    Anyone know where I could get it fixed cheaper than you?
    Or better yet... anyone know where I can I get it fixed?

    David Hutchinson

    Hello
    This is not an answer to your question but can solve the problem if it is the same that I had.
    In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
    The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
    motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
    The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

    Where there is a similar issue, I hope that solve you it like I did.

  • HP pavilion n203tx 15: Amd driver has stopped working and has recovered

    Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

    my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

    Thanks in advance

    Hello

    Try this

    install the following in the same order

    Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

    Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

    BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

    Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

  • Satellite M70-340: display driver has stopped working

    HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

    I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

    ADAPTER IS INTEL! ATI DOES NOT INSTALL!
    DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

    PLEASE SUGGEST...
    CONTACT on [email protected]

    Hello

    If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
    This means that some hardware component is defective.
    In this case, you need to take your laptop to the service.

    Good bye

  • Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

    I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

    Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

    HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

  • Need help, get message display driver has stopped working, but has recovered

    Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

    Hello

    1. what operating system do you use?
    2. What is the brand and model of your system?
    3. Once you get this error message?
    4. you did it before the issue of any material changes or software?

    Try the steps outlined in the methods mentioned below and let us know if it helps.
    Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

    Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

    Step 1: Try now to the KB article to perform the clean boot:
    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
    http://support.Microsoft.com/kb/929135
    Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

    Clean boot in XP:

    Try now to the KB article to perform the clean boot:
    http://support.Microsoft.com/kb/310353
    Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

    Step 2: Turn off the antivirus software:
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Method 3: update the driver for

    Updated a hardware driver that is not working properly:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

    Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

    To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

    Use the Group Policy settings:
    To resolve this issue by using Group Policy settings, follow these steps:

    (a) click Start, type gpedit.msc in the search box and press ENTER.

    (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

    (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

    (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

    Use the powercfg command:
    To resolve this issue by using the powercfg command, follow these steps:

    (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

    (b) at the command prompt, type the following commands:
    powercfg - X-monitor-timeout-ac 0
    powercfg - X-monitor-timeout-dc 0

    Get back to us if the problem persists.

  • Display driver has stopped working during the game the Sims 3

    Original title: video card? With the Sims 3 ~.

    I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

    -Poprocks26

    I thought about it, are not even worry about this.

    I just needed an update from Intel. It works perfectly now. :]

Maybe you are looking for

  • Satellite A200-PSAF3A cannot install XP SP3

    I have an A200 - PSAF3A laptop computer which came with Windows vista, but also a disc provided by toshiba downgrade to XP. I used the disk and followed the instructions to downgrade to XP Prof SP2 successfully. I am now trying to install XP SP3 as a

  • Tecra 9100 for TV connection problems

    Hello I hope that im asking this question in line. I tried to connect my laptop to my tv without success I pass the cable in the left side of the laptop and plug the other end to the video output on the tv I have both put power off and power on, but

  • OfficeJet Pro more than 8600: ReadIris OCR in Windows 10

    I have upgraded to Windows 10 and the old HP interface, which I was very pleased, disappeared and was replaced by HP Scan and Capture that does not have an OCR option.  Work through web information I tried to reload the component ProIris OCR of my or

  • I want to use the expression editor control in a DLL VC ++ how?

    Hello as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems: If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not dur

  • wireless client cannot see wired - WAG320N

    Hello my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addr