my computer again "you're not enough virtual memory" when I'm trying to load a game.

Similar Questions

• Photoshop CS3 is not enough virtual memory

  My photoshop program won't let me even open a file now without busting a message saying it's not enough virtual memory. I tried to change the amount of RAM, it offers access too, but it does not help. It does not seem to count how many things I opened.

  Try to change or add to the "scratch disks" Photoshop has access too. Its in the preferences under the edit menu, probably in the performance category, although I don't remember CS3 very well these days.

  Terri

• VMware Workstation 6.5 - not enough physical memory is available to power on this virtual machine

  My host is a processor Intel Core i5 (active VT) and 8 GB of RAM Windows 7 64 bit running with hardware virtualization enabled.
  
  Apart from McAfee Antivirus and the usual Windows updates, no other software has been installed on the host machine.
  
  I am running Vmware Workstation 6.5 and I installed 3 popular VM with below guest OS, s/w and memory:
  
  VMware ESX 4-2 GB
  Server 2003 (DC and DNS) - 1 GB

  Server 2003 (vCenter Server) - 1 GB
  
  However, it is not possible for me to all 3 virtual machines run simultaneously. If I turn on Vmware ESX 4 and try to start Windows 2003 VM, it displays the following message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To resolve this problem, set the parameters in additional memory to allow for more virtual memory machine to swap.

  If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  Can you get it someone please let me know where are the rest of the memory is busy? Size of total memory of 3 virtual machines are only 4 GB and I have to be able to run all the VMs set 3, but in this case I can't even run two virtual machines simultaneously.

  Please help what should I do?

  With 8 GB of RAM on the host allowing why only 1 GB to be reserved for all you run virtual machines?

• Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office

  original title: DOC files

  Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office. Most of the time, I get a screen that says 'open' or 'save' the file and when I click on 'Open', this message disappears. Sometimes it opens, but the message is completely scrambled with letters and symbols.

  Cannot open DOC files in wordpad or Notepad. you will need a more advanced software suite. Try OpenOffice.org - it's free, and it supports the DOC format. But the best solution is to get Microsoft Office once and for all.

  Download OpenOffice.org: http://download.openoffice.org/contribute.html?download=mirrorbrain&files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe. Note: Click on the link at the bottom that says "http://download.services.openoffice.org/files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe" to download the program.

  This should solve your problem,

  Rifdhan

• 12 GB of RAM is "not enough physical memory" for a 2-GB virtual Machine?

  I run VMware Player 6.0.3 on Windows 64-bit 8.1. My host has 12 GB of physical memory and my virtual machine uses 2 GB memory. And yet, I can't start my VM because VMware has said "not enough physical memory is available to power on this virtual machine with its configured settings".

  According to the Windows Task Manager, only 15% of my physical memory is reserved for the current enforcement process. So, how is it possible that I don't have enough RAM to run my virtual machine?

  This is a known issue!  Take a look at: (workaround in) Re: 8.1 Windows October rollup KB2995388 and problem with 10 Workstation

  Also take a look at: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation & Microsoft Patchday's and ' not enough physical memory is available to power on this virtual machine " & 14 October patches for WIndows 64 bit 8.1 breaks VMWare player 6.03

• my computer continues to run out of virtual memory

  I deleted programs and defragged my computer.

  To make sure that we are talking about the same thing.

  Exactly how do you know that you run 'Virtual memory' specifically?

  Virtual memory is actually a 'swap file' specially allocated space on the hard drive. Most of the facilities have it set to automatically expand and shrink as needed. If freeing space on your hard disk and Defrag is reasonable.

  The amount of used and free space on the hard drive you have?

  You should also check the amount of virtual memory allocated.

  1. Open the 'System' using the shortcut dialog
  2. Notice how ' installed memory (RAM): "you have.

  3. Press or click on advanced system settings. You may be prompted for an administrator password or to confirm your choice.

  4. On the Advanced tab, under performance, tap or click settings.

  5. Press or click the Advanced tab, and then under virtual memory, press or click on modify.

  6. Claire runs it automatically the size of pagefile for all drives check box.

  7. Under drive [Volume label], tap or click the drive that contains the paging file that you want to change.

  8. Press or click Custom size, type a new size in megabytes in the initial size (MB) or maximum size (MB) box, type or click on set and then press or click OK.

  In general, the recommendations are that you should have 1 to 3 times your RAM memory allocated to virtual memory.   If I have enough free space on the hard drive, I personally prefer the size of the max and min even swap file.

  Originally, in the 1980s and the beginning of the 90s HD space is at a premium and so was RAM (I paid $5000 for my first computer with 2 MB RAM and 80 MB of free disk space!). It made sense to let the system allocate more swap file space according to the needs, and then free it up. But this approach also has the effect of fragmenting the HD.  Now ship computers with RAM that is literally orders of magnitude larger than at the time and so are HD, in fact, if you have lots of RAM, say more than 4 GB for a home user, I've seen some recommendations to minimize the size of the swap file. These same days budget computers come with more than enough disk space that continuously allocate enough virtual memory is not a constraint.

  If you set a constant pagefile size, it's probably a good idea to defragment the paging file too. This requires special tools to defragmentation.

  FYI: this is the wrong forum and category to ask this question. You should ask her in the Windows forum.

• VMware Workstation 10 - not enough physical memory...

  So, I'm aware of the Windows KB2995388 8.1 update that causes this problem:

  Not enough physical memory is available to power on this virtual machine with its configured settings. To solve this problem, decrease the size of the memory of this virtual machine at 460 MB, increase the amount of physical memory for all the virtual machines to 3296 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap. It is possible that native and/or services applications have locked memory which could help launch the virtual machine. Close unnecessary applications or services can free up enough memory to start this virtual machine. If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  but after upgrading my OS today I have the same symptoms and can't find installed KB2995388.

  I tried running VMware Workstation as an administrator with no luck either.

  Y at - it no alternative workaround, or is there an another Windows update that can cause this problem?

  Thanks for any help and advice.

  Yes, other updates can cause the same issue, because the change that was made in KB2995388 was incorporated in to many other more recent updates as well.

  What version of Workstation do you run?  If you run Workstation 10.0.4 or newer on Windows 8.1, this should no longer be a problem.

  --

  Darius

• After the crash of the system, Workstation 10 reports "not enough physical memory is available" - how to fix?

  On a Windows Pro 8.1 with 32 GB memory main system, I was running three virtual machines on 10 workstation.  Then we had a power failure and the system crashed.  Once the power was back and I restarted, any attempt to run a virtual machine failed with the following (change numbers) message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To solve this problem, decrease the size of this virtual machine to 988 MB memory, increase the amount of physical memory for all the virtual machines to 1219 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap.

  This occurs if the virtual computer, I try to start is one of those that was going or who was not working at the time of the accident.  In this case if I am as an administrator or not.

  I checked Edit/Preferences/memory, and reserved memory is set to 24480 MB - 24 GB.  Can I run a virtual machine if I set the memory size to below the value indicated in the message (in this case, 988 MB).  Of course, I don't want to run like that!

  The Windows System Control Panel reports (almost) complete 32 GB system memory. Task Manager indicates that only 7% of close to 32 GB is in use.  "About VMware Workstation", reports 32640 MB.

  How can I fix it?  I'm basically dead in the water.

  Bob

  You may encounter the same problem that others have reported in this other thread: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation

  Try the workaround it and see if it helps.

  --

  Darius

• Not enough (RAM) memory free to start treatment for Outlook services

  When I run Outlook 2007 SP2 and after getting my new one e-mail a notice appears of the outlook on the outlook bar icon to say tasks cannot start treatment services because there is not enough free memory to run this program (and it I do not see my new email). I added 2 GB of RAM and now have 6 GB in my Dell XPS 420 desktop computer. It has no effect on the error message. I'm running the 32-bit version of Windows Vista Ultimate SP2. In the physical memory in task manager, I show about 3100 MB in total, 1500 cache and 0 free. Don't know why the total would not be about 6 GB which is what is installed. What can I do to manage the memory or any other suggestions for the prospects for a return to normal?

  It turns out that the problem was with Outlook and not related to the memery computer. It was solved by going to features, programs and Control Panel, and then repair Microsoft office system 2007.  Thank you for all your help.

  Hello

  32-bit Edition of Windows Vista has a limit of 4 GB memory. If you have installed more than 4 GB, Vista will not read the extra memory.

  The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• VMware workstation 10 not enough physical memory is available

  Hello

  I'm trying 10 workstation. I have a system with 16 GB of ram. My virtual machine has a reserved 12 GB ram. In wokrstaion 9 being works very well. 10, I get the message

  not enough physical memory is available, try to assign it 11960 Go.

  Why am I suddenly this message?

  
  

  I did a clean install of workstation 9. In the preferences of the reserved ram is 13790. So I get the error. When you set V10 for this value I get warnoing is too, but I can start

• not enough physical memory is available.

  When you try to power on any virtual machine, the warning for "not enough physical memory is available to power on this virtual machine... »

  The Office has 2 GB of ram, of which 1530 is attributed to the workstation.

  I rebooted, tried to run workstation mode administrator, without result.

  We have encountered this same problem in the House and focus on it.

• Not enough free memory

  Hi, I have the same problem, unfortunately, your solution does not work, when I paste the code at the command prompt, an error has occurred, and of course I started the administrator command prompt...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/there-is-not-enough-free-memory-to-run-this/815fcc17-B5A5-4468-98c7-94d1ba3e5b3c?page=1 RelanAlex said they have tried the solutions and are still having problems. >

  Hi all, thanks for the reply I appreciate (I write a long solution is a pain more describe a problem), but I take the option reinstall my windows so I don't mind more, and now everything is back to normal, again, of course I lost most of my work, the software and the etc T_T I have ever had the chance to backup. I learned my mistake and I never mess with registry thing again.

  Once again thanks for the help and good day.

• There is not enough free memory to run this program. Quit one or more programs and then try again

  can someone help me?

  I can't open the main folders such as documents, etc. I can't open the control panel. Repeated me error Explorer.exe there is not enough memory to run this program. Quit one or more programs and try again. Then, the audio has an x mark, that even with the internet icon has an x mark but I can use the browsers and the internet.when I click on brand x audio it is said that the audio service is not running, I think it happened after that I editing the permissions on the registry key for visual basic 2010. anyone from microsoft, please help.

  The same thing happened to me, and finally I found the solution, you're right, it's a registry Permission problem, what I tried and did not help:
  -Mod safe - the same error
  -Antivirus Live CD (Nothing found)
  -Restore a backup of the registry - not worked
  -Even worse, it is impossible to install software

  And here is the solution:
  1. start a command as administrator prompt
  2 copy and paste Foollowing code and press enter

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  3. reboot your system

  For more information, please visit my Blog (it's not in English)

  http://www.Sordum.NET/16937/Windows-Explorer-e-tiklandiginda-yeterli-Bos-bellek-Yok-uyarisinin-cozumu/

• Won't let me download anything not "enough disk space" when I have over 200 GB of available

  All of a sudden my late 2011 macbook pro does not allow me to download anything on the internet. It is said there is not enough free disk space to however I have over 200 GB of free. When I look at the internal drive and the drive macbook hard disk, it indicates that the hard disk is completely full when I run disk utility, but the only thing that I should have on my Mac hard drive that has plenty of space. Nothing seems to work. I tried to repair/correction of disk utility and it does not say there is a problem, but obviously something is not seriously. Help, please!

  If you try to add a large amount of data at once, and you receive an alert about the lack of space, then in the menu bar, select

   ▹ System Preferences... ▹ Time Machine

  If there is a padlock icon in the lower left corner of the preferences window, click on it to unlock the settings and to authenticate. Turn off the Machine time and then back on. Close the window.

  Restart the computer. Test.

• Marlin F131B, NOR-IMAQdx 3.7, error 0xBFF69000 not enough of memory

  Hello

  We're having trouble getting our Marlin F131B-NIR camera to run under Labview.

  The camera works (using AVT Unicam 1.1.3) using Matlab.

  The computer has MAX 4.7.4f0 and Vision Acquisition Software August 2010 (NOR-IMAQdx 3.7) and running Windows XP 32-bit SP3.  The version of Labview is v8.6, but the problem is to the MAX.

  The camera appears in MAX, as

  NOR-IMAQdx devices

  CAM1:AVT 1394 camera

  but when clicked on the camera, we get an error message

  Error 0xBFF69000
  Not enough memory

  We would be grateful for any suggestions how to get the camera to open up to the MAX.

  Thank you very much

  Gil

  --

  Hello Gil,.

  In this system, how many camera you try to use (1, 2,...)? Could you confirm me that when you test your camera in MAX, AVT Unicam is closed and released the resource?

  Have you properly associated with the driver OR (Legacy IMAQ for IEEE 1394 driver) this camera in MAX?

  There is a good web page on our website that statement all the step to configure and install an IEE-1394 camera on a computer. Perhaps, which might help you to invesigate on this issue:

  http://digital.NI.com/public.nsf/allkb/C2F87C32F5627A0A862569E5006C17C4?OpenDocument

  http://digital.NI.com/public.nsf/allkb/E8CAFBC41A7B9BF086256D3C00650011?OpenDocument

  Let me know if you have any questions,