My computer broke and I get this error message

Similar Questions

• I'm trying to send some pictures of my photos and I get this error message

  I'm trying to send some pictures of my photos and I get this error "host 'SMTP' could not be found. Please check that you have entered the server name correctly. "Account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D" can someone help me

  What email program are you using? Unless you use an e-mail client, start a new message, and then attach the photos.

• My outlook express has stopped working and I get this error message, "the connection to the server has failed..." »

  My outlook express no longer works and I get this error: the connection to the server has failed. Account: 'pop-server', server: 'pop-server', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E. Can someone tell what to do?

  Make sure that you can access your e-mail via webmail, if you have this option to ensure that it is not a problem on the server.  Then locate the antivirus interference and ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Try to remove your e-mail account and then close OE and then add it back again and then see if it works.

  Steve

• Firefox does not open and I get this error message

  When I click on the firefox icon I get this error that says Firefox your profile cannot be loaded. It may be missing or inaccessible.what it dose average! How can I save my internet!

  create a new profile

  • Use the Profile Manager to create and delete profiles Firefox

  and transfer of the old stuff

  • Recovering important data over an old profile

• Hi I have a computer laptop g56 and I get this error message

  Hi I have a computer laptop g56 and I'm getting this system disabled error message 58347730 please help

  Try entering the following code

  47025316

• my email receives the e-mail and sends only very short. Nothing more wrong through and I get this error message

  As my title States I can receive email fine, attachments and all.  But when I try to send email I can send only very short.  Nothing more and I get the following error message:

  An unknown error has occurred. Subject 'test', account: ' pop - server.triad.rr.com', server: ' smtp - server.triad.rr.com', Protocol: SMTP, server response: ' 421 4.4.2 service timed out. ', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67

  It started just yeaterday, everything has been fine so far

  Thanks much for any help!

  Glad you solved it.

  It can be compacted at this place. There is an option to compact the database on shutdown after X works.

  If you keep WinMail open most of the time and let the computer sleep, place during about 10 tracks. If you open and close WinMail daily, place during about 75 ~ 100 races. When you close WinMail and have reached the setting chosen it will inspire you to compact. It is enough to click OK and don't do anything until it's done. It should take only a few seconds if you do this regularly as stated above.

• I tried to upgrade from Microsoft office 2003 and 2007, and I get this error message: Error 1606 could not access network location %AppData%.

  Now, I can not uninstall, repair Office 2003 or 2007. and my microsoft office 2003 documents are less error out when I try to open them.

  Hello Answerspls09,

  Thanks for providing the information.

  Solution:

  Check with the below weblink.
  __________________________________________________________________________________

  "You receive an"Error 1606"error message when you try to install or remove a program from Microsoft"

  http://support.Microsoft.com/kb/886549

  __________________________________________________________________________________

  ["Windows Installer Error 1606" error message when you try to launch help in Office 2000 programs]

  http://support.Microsoft.com/kb/313257
  __________________________________________________________________________________

  That should solve your problem.

  Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• Try to update the current Web site and I get this error message

  I can't update my dute site to "An FTP error" when connecting to the server. See attachment below. I have another site and I have day yesterday without problem.

  I use: Windows 7, IE 11, Avast Antivirus, DW CS6, Go Daddy is my host.

  Thank you, Mariola

  

  Check your FTP credentials.

  Lost random access with GoDaddy in the past. They have "updated" the server and lost your credentials in the process.

  You can also activate or use the FTP Passive mode and performance optimization in your FTP site settings.

  Also check that you are using the folder root correct server. I think GD still use / public for this. It's been a while since I've dealt with them.

  If none of these things make the case, we will need to take a look "under the hood" so to speak. Post a screenshot of your FTP (change any sensitive information) can help.

• Im trying to install a printer and I get this error message

  "the WIN16SUBSYSTEM has BEEN UNABLE to ENTER PROTECTED MODE, DOSX MUST BE in YOUR AUTOEXEC. NT AND PRESENT IN YOUR PATH, then it wont let me load software with what happens when I run the cd printer and suddenly the installation button to install the software

  I wonder if this CD is for Windows XP.  Try to connect to
    http://support.Lexmark.com
  Then, locate your printer and download the driver that it is displayed.  It should come with instructions for installation.

  HTH,
  JW

• I try to install Muse and I get this error message from the request of Bishop.

  We encountered the following problems:

  Please connect to the internet, and then try again.

  I am connected!

  Check if it helps. http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• Every day I get this error message and send it to Microsoft. 32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Every day I get this error message and send it to Microsoft.  32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Also: Microsoft called me about a report of my computer.  My daughter thought it was a hoax and hung up.  Is there a way I can connect with this Department once again?

  Microsoft does not automatically contact you if you send details of error for them.  They use these reports to see what types of questions are trending and those that are trending upwards looked at herself.  The rest cannot.

  And your daughter has been very wise - the call she received WAS a scam and she did well to cling to their topic.  Microsoft never call you unless you call them first, and they tell you that they will call back.

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">