My computer continues to send me the following message: _

Similar Questions

• oversized mail stuck in Outbox, computer continue to send mail the window 0x800ccc6d error report

  About 4 days ago, I sent an e-mail with 5 photos attached, mail was sent bot did not reach the destination because of this be oversized mail window error report. 0X800CCC6D error number. The mail is not found in the Outbox and seems to float in the system. The messaging system works, I can send E-mail, oversized mail remains in the system when the other letters are sent and.   My Question is: How can I remove the letter mail in the window. I use Windows Vista, my mail server is Comcast. Thanks for the tips. Henning

  Even if you do not see, maybe it's there.

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  If still no joy, try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• I tried to send an email and got the following message: an unknown error has occurred error number: 0x800CCC6F.

  Transaction failed.  Unable to send message. Possibility of abuse

  I tried to send an email and got the following message: an unknown error has occurred. Are subject: Hello from the UK', account: 'Martin', server: 'mail.btinternet.com', Protocol: SMTP, server response: 554 Transaction failed: cannot send the message due to the possibility of abuse. Please visit http://postmaster.yahoo.com/abuse_smtp.html for more information ', Port: 25, secure (SSL): no, Server error: 554, error number: 0x800CCC6F please can you advise what could be the problem?

  Hello

   
   
  1. what web browser do you use?   If you use Internet Explorer, what version you have?
  2. you use Yahoo mail?
  3. what anti-virus software is installed on your computer?
  
   
  "If you use Yahoo mail, I suggest you to report your request in the support forum for Yahoo mail.
  http://answers.Yahoo.com/dir/index?link=list&SID=396546091
   
  See also, !-mail-settings-for-outgoing-and-incoming-mail-servers%3F http://bt.custhelp.com/app/answers/detail/a_id/6876/~/what-are-the-bt-yahoo

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no"

  When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no,"that does this every time as I have disconnect. I look in my Outbox and there aren't waiting for messages. How can I get rid of this pop up?

  Hi LarryMorton,

  Thanks for posting your question in the Forum of the Microsoft answers Site. Your question would be better addressed by experts in the in Forum Windows Live Mail. Please repost your question here,

• Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx

  Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx I don't have Kodak on my computer and I typed Kodak in the search above Start section and checked my programs.

  How do I get this off of my computer?  Any suggestions appreciated woul

  I typed Kodak in search above to start section and checked my programs.

  Instead do with msinfo32.exe to open system information.   Then, in the Environment\Startup software do a find, category searches only for Kodak

  Even better would be to use AutoRuns (utility system available on TechNet).

  HTH

  Robert Aldwinckle
  ---

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• When I try to Earthlink software, I receive the following message if the computer crashes before poster: RAS error Interactive Mode #703

  I have Windows XP Home Edition, the internet connection switched through Earthlink and McAfee antivirus.  In August, my antivirus software and when I tried to access the internet, the computer locked up--had to disconnect/reconnect to restart. Problem persisted. McAfee can tell me nothing.  At the suggestion of Dell, I replaced the hard drive.  Reinstalled Windows mfg disk and could connect to the internet just fine w/out of antivirus software.  Installed McAfee and locked up again.  McAfee is baffled by this, as is Earthlink.  When I tried the Earthlink software, I received the following message before the computer locked: RAS error Interactive Mode #703. EarthLink told me that there is a "Windows problem in common.  If anyone can help?

  Hello

  As the problem only occurs after installation of Mcafee, you could try to install another antivirus and check.

  I suggest you to go through the steps mentioned in the link below and check.

  Method 1:

  How to troubleshoot possible causes of Internet connection problems in Windows XP http://support.microsoft.com/kb/314095

  Method 2:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• I get the following message appears when I try to open a link in an e-mail message: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. »

  I get the following message appears when I try to open a link in an e-mail message-"this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "Please someone how can I fix this = I'm not a computer genius so please tell me in as simply as possible.  This problem is ongoing on about 3-4 months - I want some food network recipes downloasd but cannot

  original title: error message in Outlook7

  You receive an error message when you click a hyperlink in Outlook
  http://support.Microsoft.com/kb/310049

  The Outlook forum is located here.

  The Applications Microsoft Office forums
  http://answers.Microsoft.com/en-us/Office

• EVERY time my computer from a friend (win7 OS), the following message STARTS opened in Notepad opens, what should I do?

  EVERY time my computer from a friend (win7 OS), the following message STARTS opened in Notepad opens, what should I do?

  the msg in Notepad startup is
  "
  [. ShellClassInfo]
  LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21813
  "
  How can I help him solve/fix for this problem?

  Run msconfig and check in the Startup tab to view all the items being preloaded. There will be a lot but look for those related to Notepad or in a .txt file, uncheck the box it and restart to see if the problem is corrected.

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You need to fix the

  I bought Adobe Acrobat Pro 9.  I used it on my computer for years with no problems.  Today he gave me the following message: "license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (0)"I then uninstalled and reinstalled using the license key of my package, and I just get the same message.  I contacted customer service and they told me that they are unable to support me and directed me to the forum.  Please help as soon as POSSIBLE.

  Error: "License has stopped working". Windows

• When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  Hello

  Please visit the following link to download: -.

  Download Creative Suite 6 applications

• Attempts to convert a word to pdf doc using windows 7 64 bit computer. During the conversion, he goes to the notebook with the following message:

  Hello:

  I'm trying to convert a Word Doc from MS to a PDF file using my new 64 bit Windows 7 system.  When in the Word doc, I go to print, then choose PDF and then after the 'conversion', he goes to the notebook with the following message:

  %% [ProductName: Distiller] %.

  Cambria found, using Courier.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ()

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  I'd appreciate someone is able to help me with this problem.

  Thank you

  Aida

  I don't know what PDF "virtual" printer that you use, but you can simply add the free Microsoft SaveToPDF complement for your installation of Microsoft Office and avoid these 'virtual' PDF printers.  Your assistant head of household can already do.

  Office 2010

  http://Office.Microsoft.com/en-us/support/redir/HA010354239.aspx?QueryID=423abf3d3be54a199d634bd88dca8478&respos=0&CTT=1

  Office 2007

  http://Office.Microsoft.com/en-us/support/redir/HA010064992.aspx?QueryID=423abf3d3be54a199d634bd88dca8478&respos=1&CTT=1

  These add-ins are explained, as well as other things, to http://office.microsoft.com/en-us/support/?CTT=97