My computer crashed so I did a system restore, now I can't restore it

Similar Questions

• Computer has been recently hijacked with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since

  Computer was hijacked yesterday with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since then, have been opening several programs such as anti-virus, security, most of the elements in the Panel of control etc. Always can access internet, but only through IE and Mozilla not. Cannot open Outlook Express and need to connect to the sky for e-mail. Impossible to download and run programs as computer application which program I use to open or run the said downloads.  Help!

  It would seem that your registry database has been changed in order to disable the functioning of all. EXE file. You need to restore it, but cannot use regedit.exe to do. Solution: make a copy of the regedit.exe regedit.comappointed.

  Open a command prompt by typing the Windows key + R and type cmd then hit . Type in this commnd:

  copy c:\windows\regedit.exe regedit.com

  ... and click on . Next type:

  Start regedit.com

  ... and click on .

  In the RegEdit program, navigate to the registry:

  HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  In the right pane, double-click the (default) value. Delete the current value data, and then type:

  "%1" %*

  (i.e.: quote-percent-one-quote-space-percent-asterisk)
   
  Close the Regedit utility. Your. EXE files must be start normally now. If the problem persists, or redone surface shortly after this procedure, your computer is still infected. In any event, the execution of full scans with MalwareBytes and your own virus anyti is recommended.

  The complete procedure (for XP) is detailed here.

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I did a system restore and I went to do my updates, but get this error number: 0x8024400A

  I did a system restore, and I went to do my updates, but this error occurs, could someone please?

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Hello

  1. don't you make changes on the computer before the show?
  2. what Windows update you are trying to install?

  Method 1:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Perform a clean boot and try to update windows and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  
  Method 3:
  You can also try the steps in the supplied knowledge base article and check.
  You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
  http://support.Microsoft.com/kb/943144
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756
  Method 4:
  You can also follow the article mentioned below to resolve the error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

• Did a system restore... and now it won't let me connect?

  I did a system restore because some programs running properly, running extremely slow, and he said that my CPU usage was 100%. Theere was that a program works do not, so I restored my computer to the last date, I knew that it worked properly, (10/7-only half the program worked), she let me open a session and was much faster, but none of the programs were working now. So I restored as of today, and he let me not open a session. But worked in the same way as it did before the system restore. So, since then, the program worked correctly 10/06 all day, I decided to restore it to the 10/6 No 7/10 as before. Now it won't let me even open a session. When I click on my user name and put my password, it says ' system will not connect PC20 is not available. I tried F8 safe mode, safe mode with network, last known good configuration,... etc. Nothing works. Not even as an administrator. What can I do?

  Hi adeel888,

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I changed my admin.password last night and the earlier my husband did a system restore on it. now it tells me wrong password

  original title: help please!

  I have windows vista on my acer aspire 5517 I changed my admin.password last night and the earlier my husband did a system restore on it. now it tells me wrong password... I don't have a dics in it plese... I need help ASAP

  Next time please post in a forum of Vista. This one is for Windows 7. But since you're here:

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• ASUS laptop computer stuck on reboot screen after system restore

  Hello

  I did a system restore on my laptop and asked that it be returned to the State where he was 3-5 days ago.

  It was all going well until he came to turn it back on - it is now stuck on the screen to restart for almost 2 hours!

  I don't want to cut to the case that it damages, but I don't know how to get out of the reboot screen.

  Any help/advice would be much appreciated :)

  Hello

  This problem could occur if the system restore was not completed successfully.

  If the computer is blocked at the start screen, I suggest you to restart the computer and see if you can start the computer normally.

  If this isn't the case, I suggest you to perform auto repair from WinRE. Check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  (a) to Insert the media (USB or DVD) and restart the computer.

  (b) key press F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive that you inserted the installation media in.

  (c) once the Windows Setup window appears, follow these steps:

  (d) click Next , and then select fix your computer.

  (e) you will see a blue screen and a option to choose.

  (f) select the Troubleshooting option and select Advanced options.

  (g) you can choose automatic repair in Advanced startup . option

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I want to restore my laptop on 26 Oct 27, I did a system restore back up and lost all 'my documents' and personal files.

  I want to restore my laptop on 26 Oct 27, I did a system restore back up and lost all 'my documents' and personal files. Cannot return to a permeable date as its non bold on the calendar except Oct. 27, when I made the changes. HELLP

  Try

  http://www.Piriform.com/Recuva

  and

  http://www.EASEUS.com/download.htm

  If this post answers your question, click mark as answer .

• I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  Hi rich,

  What kind of backup do you have?  If it were a full image backup, restoring them will be difficult unless you restore the entire image.  If it was a normal backup of files and folders, it should be fairly simple.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on backup and restore Vista process

  http://technet.Microsoft.com/en-us/magazine/2007.09.Backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.   It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):

  http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If the above does not help with your problem, then please go to the special Microsoft Forum dedicated specifically to backup issues and problems at the: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/ for assistance from experts by specialists in this field.

  I hope this helps.

  Good luck!

• I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  Try this to rebuild icons: -.

  Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-

  • Taskkill /IM explorer.exe/f
  • CD /d %userprofile%\AppData\Local
  • DEL /a IconCache.db
  • Shutdown /r

• I need to reinstall Acrobat 7 Pro after a computer crash.  I have the access code.  Where can I download or reinstall?

  I need to reinstall Acrobat 7 Pro after a computer crash.  I have the access code.  Where can I download or reinstall?

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• I just did an itunes update, now I can't find my music. Help please.

  I just did an itunes update, now I can't find my music. Help please.

  You will need to provide more details, but here is a screenshot of my iTunes (top-left) window

  

  The row of small buttons 'Library' has been replaced by a drop-down box, when you select the library view.  Music is selected in the screenshot.  In the sidebar, under the library, you can select the view to use for the library.  In the screenshot, songs is selected, which presents a library as a list of simple songs with columns.

• Mozilla Firefox 10.0.2 is apparently not compatible with my system, and now I can't uninstall it.

  This program is apparently not compatible with my system and now I can't uninstall it, and I have problems loading when you try to access other Web sites, IE Facebook etc.

  You should ask in the forums of Firefox.
  http://forums.mozillazine.org/index.php?c=4
  http://support.Mozilla.org/en-us/questions

• my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  It would be useful to know what camcorder from toshiba.
  Memory, are all quite small pocket, recording cameras a card and HD, probably using mpeg4.
  Your cam will have come with a cd with the right codec on it to allow you to play your files on the pc, you will need to reinstall this software.

• Creative Cloub corrupted file. Because of the process manually into the system. Now, I can't reinstall or remove.

  Creative Cloub corrupted file. Because of the process manually into the system. Now, I can't reinstall or remove. even the restoration of the system does not what to do, how restore creative cloud

  Please check 'Private Message'.

  Concerning

  Megha Rawat