My computer crashes when I try to run some games and crash report says that it's probably caused by rwdrv.sys.

Similar Questions

• When I try to install SP1a, I get a message saying that the file is corrupted.

  Need help, Im confused

  OK, so I have windows XP I am trying to install on my acer aspire 5100. Its an old copy that came with another computer. All I'm trying to do is to clean the computer clean and start over. Installation was successful, but when I try to install SP1a I get a message saying that the file is corrupted. I can't connect to the internet of him because the surrent version doesn't support WPA2. So im downloading on an external HD and try to run it from my computer. When you try to install SP2, it says that the file is not a valid Win32 application. Any help / ideas would be greatly appreciated, thanks in advance!

  Again, your best option is to order a set of Acer recovery disks.

  If you insist on doing things the way hard, then check first that download, you have to SP2 (you don't need SP1a because it is part of the SP2) is correct - check the hash of the file downloaded against one published (where you downloaded of?)

  If the hash is correct and then try running SFC/scannow from a command prompt - it may work, depending on how the software manufacturer set up the drive, but it is preferable to use in conjunction with a good OS disc, rather than the recovery disk.

• I have Quicktime 7, but when I try to open iTunes I get a message saying that I need to update Quicktime 7.5.5. How to do this?

  I have Quicktime 7, but when I try to open iTunes I get a message saying that I need to update Quicktime 7.5.5. How to do this?

  Click here to install or run the software update from the system preferences panel.

  (143939)

• DEP DEP is triggered when I try to use MSWorks. When I try to disable it for this app it says that it cannot be disabled

  DEP

  DEP is triggered when I try to use MSWorks.  This has just begun.  When I try to disable it for this app it says that it cannot be disabled.  What is going on?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  Above is a tutorial on how to turn off DEP for a particular program.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  I saw wording like this before, and I don't think it's anything to worry about. I don't know why Adobe chose these specific words, that your changes are certainly editable after the move.

• I downloaded adobe digital edition on my computer. When I go to download my library the book it says that I need and the adobe account. When I enter my email address and password it will not accept it. It clears and ask once again my adobe id?

  I downloaded adobe digital edition. When I try to download a book from library he says that I need an adobe id. I type in my email and password I just put in place. it erases it and asks again for my adobe ID

  You can connect with the same data in the Adobe website?

• Computer stops when I try to run games, gets the blue screen locale ID: 4105

  Original title: blue screen, I don't know what to do

  Hi, for the last days of couple and officially from last week, my computer went to the blue screen with problems of memory, it seems.  I'm not very good with the technical part of the computers and I finally know what to do.  It gave me an error report which stops just when I try to use the search for a solution button.  He mostly stops when I try to run games on it, but sometimes he does when I'm not even in it. The last report of error was:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000005003
  BCP2: FFFFF781C0000000
  BCP3: 0000000000014FAD
  BCP4: 00014FAF00029F5F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050715-7051-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-11575-0.SysData.XML

  Please help me. I'm at a loss to know what to do.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• So I installed rollercoaster tycoon 3. When I try to run the game I get a box with the header "" Microsoft Visuall C ++ Runtime library ""Runtime Error! " Program: End of the 3\rct3.exe__abnormal program C:\Program Tycoon3 tycoon

  can you tell me what causes exactly this and any idea on what I can do about it?
  the box indicates that the requirement for video is ATI Radeon 32 MB GeForce 2 or higher. I have the GeForce 8400 Gs

  Hi Merlot_1984

  Welcome to Microsoft Vista answers Forum!

  I suggest that you try to run the game as administrator and verify.

  Right-click on the game, and then click Run as administrator.

  If the problem persists, I suggest that you perform the clean boot, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run the MATS I get a message that the dll is missing

  Original title: you try to run Automated Troubleshooting

  When I try to run MATS, I get a message that the dll is missing.  How can I fix this?

  Hi bjacobs,

  1. what Microsoft Fixit you try to run?

  2. when the problem started?

  For more specialized issues of Fixit assistance, please post your request on the Microsoft Fix it Center

  Microsoft Fix it Center

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to run a game that uses DirectX, it gives no error message or anything it either, then closes.

  When I try to run Black Ops II I double-click the icon and open the Task Manager to verify that the process is running. I see that it is running. But 30 seconds later, the process stops. Then I ran DxDiag and he says I'm under DirectX 11. However when I look for dxcpl.exe in the System32 folder, it isn't here. That's what I think, it is the origin of the problem. Please help me find a way to fix the missing DirectX file!

  Data sheet:

  OS: Windows 7 Ultimate 64 bit SP1

  Processor: Intel Core i5 CPU M 460 @2. 53 GHz

  RAM: 6.00 GB (5.87 usable)

  Dell Inspiron N5010

  I thought that the question was already answered-

  "dxcpl.exe (DirectX Control Panel) is not a default Windows file. I think that it only would be present when

  DirectX SDK developer tools are installed. "

  Therefore, there is no point in having a dxcpl.exe. It is not relevant to the running of the games.

  It is used by software developers who are coding with C++, and because you have not

  the software is installed, this file is not in System32.

  -If you need more information, you can post on the TechNet forums.

  TechNet forums-

  .

• Error when you try to run the game in the call of duty Black Ops II of BEX

  Hi all

  I get this error when I try to run the request of COD Black Ops single player II file.

  Signature of the problem:
  Problem event name: BEX
  Application name: t6sp.exe
  Application version: 1.0.0.1
  Application timestamp: 509a 7621
  Fault Module name: StackHash_4bc9
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0012fd4c
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 16393
  Additional information 1: 4bc9
  More information 2: 4bc95bc08c80253552a5c9f5e69006f7
  Information additional 3:7736
  Additional information 4: 77363e9c4fcc0db54525b3b0c99efd5e

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please notify.

  Thank you

  Pravin

  Hi Pravin

  It is a Buffer Exreception overflow error that takes place within the program, caused by the t6sp.exe file.

  A buffer overflow occurs when data written to a buffer programmatically also corrupts data values in memory addresses adjacent to the destination due to the insufficient limits check buffer. This can happen when you copy data from a buffer to the other without checking first that the data fits into the destination buffer.

  I recommend that you contact the developer for assistance or to check known issues or updates of performance for this game.

  Support from Activision:
  http://support.Activision.com/Contact_us

  Concerning

• COMPUTER FLASHES WHEN YOU TRY TO START A GAME?

  I JUST GOT A NEW COMPUTER WITH WINDOWS 7 AND I ALWAYS DOWNLOADED GAMES AND PLAYED TO THEM, BUT NOW WHEN I TRY TO MY SCREEN STARTS FLASHING DIFFERENT COLORS AND I MUST MANUALLY TURNED OFF MY COMPUTER TO MAKE IT STOP. EVEN THE GAMES THAT CAME WITH THE COMPUTER DO NOT WORK. WHAT IS PAST WITH IT?

  Brandisch, download you the game... or playing from those that came with your new computer.

  And, you get "flashing different colors"... as a result!

  No great wonder, here!

  What you are doing are wrong!

  You try to play these games... WITHOUT never to set the Graphics (of all the games!)... .in the Configuration program.

  All your games!

  Each game has it's own settings/Options of Configuration.

  This does not include the screen resolution setting, AUDIO editing, the Options to play the game, the scrolling function, etc.! There may be MORE, but this list is simply the 'Basics' of what you need to do before all games.

  There are games that actually have 'issues'... with some graphics..., cards and Audio, high fidelity.

  Each game/program I know... was a 'README.txt' file, in their software. You can use the option "EXPLORE / Open", leaving these games not run... from the DVD... drive to find. Give this file Readme.txt a good reading... to learn what you can do, or can not do with the game "in question".

  Most people completely ignore this Readme.txt file... and tear his hair... ask yourself 'why' they cannot play their games, then eventually in the Forums like this... complain of their problems. (Now, I wonder 'why'?)

• I am trying to download and install Itunes for Windows 10 - the download file is labeled itunes6464. When I try to install, I get an error message saying that I can't install this program on a PC?

  New HP laptop, Intel processor running Windows 10 (so I find it almost impossible to find something useful on the computer system - I'm NOT a fan of Windows 10).

  (I have a Mac and an iPhone at home, so am very familiar with iTunes)

  Downloaded iTunes for PC version 12.3.3 (which shows in my downloads as iTunes6464.exe)

  But when I try to install the package I get an error message saying "you cannot install this program on a PC. Contact the Publisher of the software. »

  No previous iTunes installs on this computer... I have on this machine - it's the only other Apple Quicktime software.

  I'll hop on the site of HP support too, but would like to help here, if they are available.

  Kath

  Specific advice Apple seem to be uninstall QuickTime, it should no longer be necessary and has a few potential security vulnerabilities. See Uninstall QuickTime 7 for Windows - Apple Support.

  Assuming that you have a 64 bit system, this facility expected to be compatible. For general advice, see troubleshooting problems with iTunes for Windows updates. More information area has direct links with the current and recent if you have problems to download, need to install an older version , or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software. It can help with the right button on the downloaded Setup program and use the run as Administrator option.

  TT2

• I have Microsoft LifeCam 3.0 is installed on my PC. When I try to open it, I get a message saying that it has stopped working.

  I have Microsoft LifeCam 3.0 is installed on my PC, I use Vista ultimate 64-bit when I try to open the lifeCam, he says: he ceased to function and to uninstall, but it doesn't let me do
  original title: how to uninstall lifeCam 3.0 from my little Vista ultimate 64 computer

  Hello. I uninstalled Yahoo bar tool that solved the problem.  Thank you.

• When I try to convert a pdf to Word, it says that the document is password protected.  What should I do?

  When I try to convert a pdf to Word, it is said the document is password protected and the Word option is gray.

  Probably, give up. But

  * If you HAVE the password you can remove it with Acrobat Pro

  * You can ask the creator of the document for a file unprotected

  Sometimes passwords are automatically added and doesn't know not, for example, some banks. There is no solution.