my computer does not display the hibernation option.

Similar Questions

• Computer does not display the Sansa Clip

  For about a week, my computer no longer displays my Sansa Clip when I plug upward with the USB cable. I can still hear the computer, the connection of detection, but it does not show in Windows Explorer, as before. I checked the setting on the clip and it sees - USB - Auto detection. If I change this meteorological service of the Canada, Windows Explorer displays the clip and folders, but the folders are empty. However, the files are still on the clip and play. Need to know what is happening, so I can add other files to my clip.

  Thanks for the inside. I just do what you say and everything works fine now. Thank you and Merry Christmas.

• my driver for the ROM of DVD TSST TS-L623D is corrupted. Computer does not display the drive. How can I fix it?

  When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.

  I tried to uninstall and reboot, but it does not help.

  I am running Vista Business.

  Try to run Fixit:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

• My computer does not display the correct names of my hard drives, but because of disk management.

  original title: Hard Drive rename BUG

  I have a problem with the change of name of the hard disk.

  Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.

  I am running windows 7 Pro.

  Someone please provide solution.

  Thank you.

  Hello

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows

  You can try these:

  a. open the Start Menu.

  (b) in the area of the white line (search), type regedit and press ENTER.

  c. click on the button continue in the UAC prompt.

  d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer

  e. in the left pane, right-click on explorer.exe and click on New and key.

  f. type DriveIcons and press ENTER.

  g. in the left pane, click with the right button on DriveIcons and click on New and key.

  h. type the drive letter (EX: E) you want to change the route name and press ENTER.

  i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.

  j. type DefaultLabel and press ENTER.

  k. in the right pane, click with the right button on (default) and click on change.

  To change the name of the reader - l.

  i. enter a name (Ex: My DVD), and then click OK.

  II. go to step n.

  Mr.. to restore the default drive name-

  i. leave it blank, and then click OK.

  II. go to step n.

  n. Repeat steps i to m if you want to add another drive letter icon to change.

  o. close regedit.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to set up synchronization, Mozilla button, top left, does not display the Synchronization Options

  I printed the instructions to set up a sync to my cell phone. Can take the first step: 'at the top left of the Firefox window, click on the Firefox button and select "Configure synchronization". The button options are: restore, move, maximize, minimize and close. "This seems to be the only Mozilla button at the top of the window.

  Hello, the firefox button will be shown when you go to view > toolbars and hide the menu bar. Alternatively, you can go to tools > options > synchronize and start the Setup from there...

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• My computer does not display the resolution that my monitor is able to do more

  I used to have my screen resolution 1440 x 900 up to what I recently unplugged my monitor now is not even an option to have the resolution 1440 x 900

  Hello

  You could try a system restore before that happened to see if that corrects the problem.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Texture filter does not display the menu option (PES, 10)

  I got 10 PSE installed on my Vista PC, which I replaced it with a new Windows 7 PC.

  I have re-installed PSE fresh from a new download.

  Before, when I clicked on the Texture filter, I was shown a screen where I could choose canvas, brick, sandstone, etc., the size of the effect, the direction of the light.

  Now, when I click on the Texture, the texture is applied immediately to my selection, and I don't have the chance to look at the options.

  Just in case there was a problem with the installation, I removed PSE and re-uploaded and re-installed. Always the same behavior.

  Y at - it a command or option I'm missing? I don't remember having to do anything to get this behavior the first time I've used PSE.

  Thanks for any idea!

  -Terri

  

• computer does not list the available wireless networks

  My computer is used to list all available wireless networks I could choose, but now not a list of people or don't allow me to search for available networks. I'm in a place where I know there is a wireless network available, however, my computer will not display it or no matter what other networks unless I plug in an ethernet cable to my computer. Then, it connects, but still does not display the wireless options. Help, please!

  Looking for a switch on the case of the computer that turns on and off wireless networking.  Check the manual of the computer user to see if there is a combination of keys, such as Fn + F5, which turns on and off wireless networking. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

  Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

  Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

  TT2

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• CC does not display the application installation options

  Hello. My operating system is Windows 8.1, 64-bit and I used Chrome. The CC does not display the application installation options only bar that allows me to leave the CC (printscreen below). I did all the steps that colleagues have stated in other sections of this forum, but nothing has worked. I'm waiting for help. Everton att.

  

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  or

  Spinning wheel in Windows https://forums.adobe.com/message/5853430

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Windows does not display the CD-ROM drive

  A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

  I did not major changes to my computer I know so I can't imagine what the problem is. Help?

  Trevor

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dreamweaver does not display the images of the root folder

  Dreamweaver does not display the pictures in the folder root in the browser:

  "< a href ="... /... /.. /.. / gen/index.php "> < img src ="... /... /.. ' / gv_logos/gen_logo.png "alt ="Gen"width ="130"height ="60"> < / a >

  "< a href ="... /... /.. /.. / english/mall/home.php "> < img src ="... /... /.. ' / gv_logos/gen_mall_logo.png "alt ="Mall"width ="110"height ="60"> < / a >

  I use Dreamweaver CS6. I checked display > display external file, it is checked. I unchecked it executed the script, still no change.

  I've been in the problem for weeks.

  It's driving me crazy. .

  Thank you all. I finally discovered what the problem was. My ' link to ' was created at the root of the Document.

  For later use, to all those who may have this problem:

  1. Launch Dreamweaver.
  2. Click on "Site" in the top menu.
  3. Select "Manage Sites".
  4. In the 'Manage the Sites' box, select your local site folder. For example, my_new_site
  5. Click on change icon (it's the second icon on the button "Import Site").
  6. The site for my_new_site configuration (for example) is displayed. Now click on "Advanced settings".
  7. Search "link to:" in the options, select 'Site Root '.
  8. Click on 'Save' later, the box disappears.
  9. Click on 'Done'... and you're done!

  You don't need to restart your computer for the settings save constantly. But if that fell safe, Dreamweaver shut down and restart it. All links should display correctly.

  But it is worth mentioning that all of the links in the following format will have to be edited:

  /.../.../main.php

  Just rewrite the link paths not all scripts.