My computer does not recognize my sound card

Similar Questions

• Equium A210-1AS - Windows7 does not recognize the sound card

  Since the upgrade to windows 7 programs do not recognize the sound card.
  My laptop is Toshiba equim A210-1as.

  The sound is ok on the speakers.
  Any help would be appreciated.

  I downloaded the last Reatek'a drivers and install them.

  Concerning
  Mike

  Hello

  I think you didn't use the right card driver

  The sound chip comes from Realtek and you need to reinstall the Realtek audio driver for the audio.

  Check this box!

• I have loaded the XP on my laptop. I lost the WiFi and all sounds. The computer will not even recognize that it has WiFi. I also does not recognize the sound card.

  I loaded XP and lost the WiFi and the sound from the laptop. It does not recognize that there is a WiFi unit in the computer. Ditto for the sound card.

  Hello

  You should have a cd driver provided with the laptop.

  If you do not access the manufacturers mobile site and download the drivers.

  Slan go foill, Paul

• COMPUTER DOES NOT RECOGNIZE THE MEMORY CARD

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  ============================
  This card worked previously on this system?

  Certainly could be hardware related... other
  cards work on your system? This card works
  on other systems?

  Perhaps the card is not compatible with your system.
  For example, it can be a SDHC memory card.

  Perhaps the following links will enlighten us:

  Availability of the Windows Vista Secure Digital (SD) Rollup package
  http://support.Microsoft.com/kb/936825

  SDHC (Secure Digital High Capacity) memory card FAQ
  http://www.supermediastore.com/SDHC-memory-card-secure-digital-high-capacity-FAQ.html

  Good luck. John Inzer - MS - MVP - digital media experience

• VAIO SVE1712W1EB laptop computer does not recognize the SD card reader. (Win 8 Pro)

  My Sony laptop doesn't recognize not his slot for SD card.
  He worked after the upgrade to Windows 8 Pro with Media Center. Later, after several months, he has stopped working.

  I think it's compatible SDA Standard SD Host Controller.
  Hardware ID: PCI VEN_1180 & dev_0822 & subsys_833810f7.

  I also installed the upate: KB2862768. But that changed nothing.

  Any help appreciated.
  

  You can run system restore to restore your computer from the date when it was working again and see if that would make a difference.

  We kindly recommend you to visit our global website of Sony for more information contact the Sony Support Center in your area to http://www.sony-europe.com/pages/europe/sony_europe.html for your model computer.

  If my post answered your question, please mark it as "accept as a Solution.

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• My HP Pavilion dv5 Windows 7 Home Premium does NOT recognize my sd card

  I need help! My computer does not recognize my sd card, or my sd card to my micro sd card adapter. I'm starting to think is housing, given that the sd card is recognized on my cell phone.

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems. If it's the USB adapter, it can be removed/disabled in BIOS

  and/or Device Manager and a used external is not that expensive.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer does not recognize my camera SD card

  We installed a wireless router and now the computer does not recognize my camera SD card. I have

  no idea how to solve this problem.

  Detail please...

  I can only imagine you saying the Autorun window not
  longer starts when you connect the camera via a USB cable. ?

  Maybe the auto run settings need to be adjusted:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  If you have external or internal drive do you have
  the same question when you insert the SD card?

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

• My computer does not recognize my flash drive at all

  In the past I was able to plug my USB key and use it (make changes, and save the information), now when I insert it, nothing happens. The screen displays just the desktop.    The computer does not recognize it.  I tried another drive flash with information on this subject, once again, nothing happened.  I need help how to fix this problem.  Thank you.

  Sounds like your AutoPlay settings need to be adjusted.

  Something to try...

  Insert the flash drive into a USB port and go... Start / my computer...

  The flash player should be recognized by a drive letter...

  Right-click on the drive letter and go... Properties / AutoPlay tab...
  Left click on the button "Restore default settings" / apply / OK.

  Now... Remove and re - insert the flash drive and see if there is an improvement.

  And... the following Wizard may be worth a try:

  Microsoft AutoPlay Repair Wizard
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• Computer does not recognize my Flash drive or application to be open.

  Original title: usb not recognized

  My computer does not recognize my Flash drive or application to be open. However, I cannot hear the sound produced when something is connected.

  Hello Miss beautiful,

  1. are you facing problems with USB devices?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

• My computer does not recognize that I have two monitors connected.

  I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.

  Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.

• An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

  Original title: peripheral equipment

  An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

  Thanks for your help.
  Christine.

  Hi Stefano,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the SD card is damaged or the card reader may not work properly.

  1. What is the brand and model of the SD memory card?

  2. What is the number of the model of the Packard Bell laptop?

  3. you receive an error code or the message after inserting the SD card into your laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you tried to insert different SD card in your laptop?

  6. have you checked the SD card in another computer?

  7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

  8. is the specific question to a SD card or any type of cards?

  9. are you able to detect the SD card in the Device Manager?

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  For reference:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.