My computer guard hangs up when I'm online games

Similar Questions

• My computer guard stop and when I return the said "STOP: 0x0000007F.

  I had my HP for 4 years and never a problem, then the other day, that he said that I needed a new activation key so I rebooted with the recovery disk and which corrects this problem, now my computer guard stop and when it restarts, it asks start in safe mode, or start windows normally the error message says STOP : 0x0000007F (0x00000000, 0 x 80503130, 0x00000000, 0x00000000) help please, I have no idea whats going on!

  Hi Doc,

  I suggest you to follow the steps and check if it helps.

  Run the memory diagnostic tool and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  You can also check out the link below.
  http://support.Microsoft.com/kb/137539
  Note: This link is also applicable to Windows Vista.

• system hangs when you sit online game

  my computer crash after going on the site of games pogo tigerwoods online ect.it visit it tell me to download the Shockwave already play.that install. It will not start back upward for at least 10 minutes when crash or IE7 stop answer on game tigerwoods EA.com .i have ran spyware malware progam used fix it .cochez all my settings still no fix.

  Moved from feedback Forum to repair the Windows and system recovery Forum.

  Hello

  1. What version of Windows are you using?
  2. Faced with this problem while playing games online?
  3. You get an error message when the computer goes down?
  4. Are you having the same problem if you are browsing Web sites?

  I suggest you send more information to help you better.

• Why my computer running so slow when I play facebook games?

  My computer works fine until I have started playing games on facebook. My games finishes loading and the internet signal is not very strong, or so it seems. Any suggestions?

  Hi JaneDewey,

  Check to see if the following is useful.

  Method 1: Install the last update of flash and check for the issue.

  Adobe - Adobe Flash Player Install

  Method 2: Try to optimize Internet Explorer and look for the question. Perform steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

  See also:

  Why is my Internet connection so slow?

• computer guard lock

  computer guard lock up when im online... internet connection is good... How do I know if somethng runs on my internet... where to start to check things... and don't download technical please

  Hi LisaG1213,
   
  -Did you change on your computer before this problem?
   
  You can check the exact error message this problem in Event Viewer.
   
  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.
   
  For more information, see:

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Keep me updated on the status of the issue.

• Slow laptop only when playing online games

  Hello
  So I noticed that my laptop has become suddenly very slow BUT! Slow down its only when I play online games, it's going to be ok for the 1st 5 minutes but after that it will really slow down, his strange since I can watch videos on youtube, etc and surf the web without problem. But if I try the game it will be slow.
  My specs are: Intel (r) Core (TM) i3 m350 2.27 GHz 2.26 GHz CPU
  RAM: 4 GB with 3.80 GB usable
  and the type of system is the 64-bit operating system
  I have windows 7
  And no, it's not a connection problem.
  Also my CPU usage when you play the game will no more than 54% (mainly bounces between 23% and 40%). and my ram is stable enough to 53%

  I use google chrome, I noticed he blames only when I use chrome, its fine with firefox.

  Going to uninstall chrome and download the latest version to see if that helps.

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer sends this code when starting up, please send fix. I have to open in safe mode, here is code I get 0xC004D401

  After I get this message the computer just hangs and then after that I opened in safe mode and shut down I am able to use my computer.

  You receive the error code shows something has changed with the Validation of your Windows, maybe you tried to install an antivirus product is not compatible with the operating system. Consider reposting your question in one of the forums below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install?tab=all
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-System?tab=all
  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  Here are a few links to relevant discussions and articles:

  Error message when you try to activate Windows Vista: "an error has occurred."
  http://support.Microsoft.com/kb/931276

  Error: 0xc004d401
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-0xc004d401/843909cd-8167-42DD-88ED-5dd07fcfe681

  0xC004D401 error
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/error-0xc004d401/ee1f70fb-1bb6-4d79-84bf-38861625a976

  Error code: 0xC004D401 - the security processor reported a system file mismatch error.
  http://forums.MajorGeeks.com/showthread.php?p=1642384#post1642384

  I hope this helps.

• My computer guard restarting itself over and over after windows xp screens.

  My computer guard restarting itself over and over after windows xp screens. He did the same when I try to put it in safe mode. Is it that I can do to get at least pass this screen?

  Kheta salvation,

  1. Did you the latest changes on the computer?
  2. You receive an error message?
  3. When was the last time it was working fine?

  Start the computer by using the option disable automatic system error reboot and check if you receive the error message, and post back with the details.

  1. Restart the computer.
  2. As the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
  3. Use the arrow keys to select disable automatic system error reboot and press ENTER.

  If you do not receive the windows logon screen, then refer to the article below and try the steps mentioned.

  Windows XP logon screen does not appear and the computer continuously restarts

  http://support.Microsoft.com/kb/310396

• "message:" other people have logged on this computer. Hanging could cause their loose data. You want to continue.

  original title: prevent someone logged on to my computer

  "When I opened my pc I get a message stating:" other people have logged on this computer. Hanging could cause their loose data. You want to continue.
  How to prevent others to log in my pc?
  thnxxxxxxxxx
  Hopefully I can answer please

  Hi Gogo haroon,

  ·         There are several users on the computer?

  ·         You have different user accounts?

  It is possible that two local accounts are connected at the same time. When you open a session and try stopping, you would see this message. It should not be another user connected when the computer is shut down.

  The message is not displayed when you start Windows.

  Respond with more information so we can help you best.

• My computer Guard stops running

  My computer guard stop while usage - the screen empties and says offline, but the Tower remains on everything to freeze me.  When she did this, I can not yet turned off the computer completely without closing the power bar (which I know is not good for the computer).  It happens more and more frequently.  My virus scans show nothing, but I'm afraid my computer/IP address is used by an outside source.  What should I do?

  Hi Jim,.

  ·         You receive an error message when the screen goes black?

  Method 1: Start in safe mode and check for the issue. Report of the results.

  Method 2: Run the next Fixit tool to see if it helps.

  Automatically diagnose and repair common security settings on Windows

  Also, check Event Viewer for detailed information on the problem.

  Open event viewer

  What are the information in event logs? (Event Viewer)

• My computer guard shut down after use of a few minutes.

  My computer guard shut down after use of a few minutes. When I re - start insiders 'fix the beginning upward.'

  Startup Repair FAQ: -.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions

  See also:
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-keeps-shutting-down-without-warning/1963241a-A4C5-4BDB-8bdf-b3e95245bfa8

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.