My computer guard shut down after use of a few minutes.

My computer guard shut down after use of a few minutes. When I re - start insiders 'fix the beginning upward.'

Startup Repair FAQ: -.
http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions

See also:
http://Windows.Microsoft.com/en-AU/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-keeps-shutting-down-without-warning/1963241a-A4C5-4BDB-8bdf-b3e95245bfa8

Tags: Windows

Similar Questions

  • shut down the computer to shut down after inactivity

    Computer turns off after a period of inactivity.

    What arrangement can I change so that my computer can't even after the period of idle?

    Thank you very much

    Margo

    Check the power settings in the control panel.

  • My computer guard shut down by itself

    My computer for some reason some keeps stopping itself. Is not over heating or something like that and the power supply is good. I can completely start the computer, navigate or do anything else for about 20 minutes, but then something forces it to stop.

    I tried to do a restore system to factory settings, I ran scans of several viruses, Malware scans and spyware superanti Scan in Normal windows Mode and safe, and its not picking up anything. \

    Before I did a system restore I got one "he's dead jim" link from my browser chrome, and then my computer would be closed, but now its just stop with that. Can I stop sometimes when im running other programs, but it will just stopped again at another time.

    The computer is only about a year with Windows 7. Anyone have any ideas?

    Hello

    ·         You get an error message or code?

    I would say lets you check in the Event Viewer log and check for defective module that is causing the problem:

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    As you have already restored the computer to the factory settings, this problem could be related to the hardware store. I suggest to check in for all devices Device Manager and also check the RAM.

    I suggest you contact the manufacturer for the unwanted material.

  • My computer guard shut down, and the report said "panic."?

    The computer stops regularly without promting, then automatically restarts after a few seconds. The reports said the word 'panic', as well as a bunch of stuff I don't understand. Much obliged for any suggestions as to what may be the problem.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    In the Console window, select

    DIAGNOSIS AND diagnostic USE information reports ▹ System

    (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu bar.

    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway.

    When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Have a 64-bit windows vista system. My computer guard shut down while I play bejeweled blitz.

    Tried to update windows and I keep getting error codes: 80070643, 8007371 B, 80070005. My Control Panel may be wrong.

    Hello

    Thank you for using the Microsoft Windows Vista Forums.

    I will need some additional information to help you best.

    O if it works well before?

    O since when are you facing this issue?

    Method 1:

    To perform the clean boot procedure, follow the instructions in the link below.

    Step 1: Perform a clean boot

    Step 2: Enable half the services

    Step 3: Determine whether the problem returns

    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns

    Step 6: Resolve the problem

    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista

    http://support.Microsoft.com/kb/929135

    After checking the problem, turn the computer back to the Normal mode.

    Uninstall or update the program that is causing the problem.

    Check whether the problem is resolved.

    Method 2:

    Analysis of auditor of file system (CFS) that might help you resolve the issue.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, the following line, and then press ENTER:

    sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

    Follow the instructions in the link below for more information on scan SFC.

    http://support.Microsoft.com/kb/936212/

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.

    My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.  Is there a way to find out why?  Is it because I connected to a USB port rather than wireless and telephone connection.

    Original title: computer spit

    I called the store where I bought the printer.  They suggested that I have download the latest driver

    from the HP website.  I did it and it seems to have solved the problem.

  • Printer Hp 6520 automatically shuts down after a few hours

    Original title - printer hp 6520 problem

    My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

    I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene

  • Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and repeat application to be run again

    Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and rehearsals require to be run again, I turnit on and it turns off after 10 minutes .This continues to repeat and it never ends, how do I fix?

    Original title: maintenance of windows 8

    I suggest that you run the following commands from a command prompt (Admin).

    (1) sfc/scannow, when finished and restart

    (2) Dism.exe / Online/Cleanup-Image /ScanHealth

    (3) Dism.exe/online/Cleanup-Image /RestoreHealth Reboot and try to perform the maintenance, if the problem persists restart sfc/scannow and restart the computer.

    Hope this helps and if you need any additional aid station and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

    If this has answered your message please mark as answer

  • Explorer.exe stops when the computer is shut down

    Explorer.exe stops when the computer is shut down

    Hi DickKimberley,

    ·         What exactly happens when you try to shut down the computer?

    ·         You receive an error message error code?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

    Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

     

    Method 2: If the method above doesn't follow the article mentioned below.

     

    Windows stops responding during Windows XP shut down

    http://support.Microsoft.com/kb/307274

    Let us know if that helps.

  • The screen on my Pavillion g6 shuts down after 60 seconds, how can I change this? cc = us

    The display on my Pavilion g6 shuts down after 60 seconds, how can I change this?

    Help, please!

    In the Power Options found in Control Panel under system and security.

  • How to disable the password screen when the computer is not used for a few minutes

    original title: password problems

    How can I stop my computer from ebb to needing a password, if not used for a few minutes

    Right-click your desktop image and select Customize,

    Click on the link at the bottom right, screen saver

    Uncheck the underlined

  • My computer shuts down after 30 minutes, no screen standby, then when you connect, it says its locked?

    When I stop working on my computer (Dell Inspiron, aio, 2305) I noticed that the screen saver comes on and then it starts to Shut Down without asking to my. All I had to do it before (after the screen saver stopped) was click on any key and the computer was delivered.  Now, there is no screen saver, the computer just stops.  The log on screen, it says as my SMA, locked.  I have to enter my password.  This weird isreally.    Please help, before things get really out of control,

    Hello
    (1) have you made changes before the start of this issue?
    (2) what is the exact error message/code?
    (3) windows operating system you are using?
    Try to change the screen saver and check if you face the same problem.
    You can check the power setting and set it accordingly.
    See the link below:
    For windows 7
    Power management
    http://Windows.Microsoft.com/is-is/Windows7/products/features/power-management

    For windows XP:
    Configure Windows XP power management
    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management

    See also:
    What happened in standby and hibernation mode?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-standby-and-Hibernate

    I hope this helps.
  • Satellite Pro A200-PSAE4E - computer laptop shuts down randomly

    I've had my Satellite Pro A200-PSAE4E for about a year and a half now. He ran very well most of the time, but in recent months he has been stop itself randomly. There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

    After frustrated with her, I did a full format my HARD drive and started from scratch. This does not solve the problem, and since then, the taskbar freezes. When I click on it I get the error and the hourglass cursor message "Windows Explorer is not responding... "I then have to click"restart", which makes the taskbar disappear for a few seconds before returning (usually without my sound icon).

    The laptop turns off when it is connected to the electric network with & without the battery and when running only on battery, so I excluded all power problem.

    I have considered it heats up too, but I use a block of cooling with built-in fans and has not himself in a few minutes after being hit not 24 hours, so I'm not sure that's the problem.

    Someone at - it ideas?

    I am running WIndows Vista Home Premium 32-bit if that's any help.

    Thank you.

    > It worked fine most of the time, but in recent months he has been stop itself randomly.
    > There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

    I think that the problem of overheating.
    The fact is that the laptop would be down automatically stops in order to avoid that the pieces of equipment against damage.
    In most cases this problem can be solved very easily. Using a jet of compressed air, you can remove the dust from the cooling modules and fans.
    I clean my fans from time to time, because I noticed a higher temperature and the laptop was a little stronger.

    Check it out mate

  • I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

    I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

    No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

  • Problems with the blue screen of death (when my computer is shut down)

    I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

    Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

    The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

    BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

    The spoolsv.exe (print spooler service) is the process that crashed.

    You have recently installed a USB printer?

    In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

    http://support.Microsoft.com/kb/969238

    There is a link at the top of the article to request the hotfix.

    There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

Maybe you are looking for