My computer guard stop and when I return the said "STOP: 0x0000007F.

Similar Questions

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  Hello

  Recuva worked for posters that have been in your same situation here

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• my computer guard stop and I get an error FFFFFFFE...

  my computer guard stop and I get an error FFFFFFFE...

  Hi kppee,

  Thank you for writing to Microsoft Communities. The problem description, I understand that your computer shuts down randomly. Before you start the troubleshooting steps, I need the required information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the articles.

  Optimize Windows 7 for better performance

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• My computer Guard stops running

  My computer guard stop while usage - the screen empties and says offline, but the Tower remains on everything to freeze me.  When she did this, I can not yet turned off the computer completely without closing the power bar (which I know is not good for the computer).  It happens more and more frequently.  My virus scans show nothing, but I'm afraid my computer/IP address is used by an outside source.  What should I do?

  Hi Jim,.

  ·         You receive an error message when the screen goes black?

  Method 1: Start in safe mode and check for the issue. Report of the results.

  Method 2: Run the next Fixit tool to see if it helps.

  Automatically diagnose and repair common security settings on Windows

  Also, check Event Viewer for detailed information on the problem.

  Open event viewer

  What are the information in event logs? (Event Viewer)

• How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. In the meantime, I'm up to 13 days until it stops working due to not bei

  How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. Meanwhile, I'm 13 days until it stops working due to not be enabled. Help?  I really need to continue to use this product for my home business. It works very well not activated but the threat is that it will stop working in 13 days more if I don't get activated, and none of the activation methods that they list seem to work.

  You can download CS2 if you have a valid license for CS or CS2.

  And you have to follow the instructions and use the download again AND the new serial number.

• I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

  I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

  You're right: 22020134.exe is the download of the installer of my link.  Did you use the serial number on the right of this download link?

• I hope you can help me.  I bought adobe captivate 8 online and when I click the e-mail link for download, it comes up with 7 programs, some are 64-bit and some are not, my computer is 32-bit.  I don't know which of these 7 to download?  All or just

  I hope you can help me.  I bought adobe captivate 8 online and when I click the e-mail link for download, it comes up with 7 programs, some are 64-bit and some are not, my computer is 32-bit.  I don't know which of these 7 to download?  All or just the 4 non 64-bit?

  I tracked down the problem with the download and installation, my windows 7 was missing a file and everything worked after reinstalling windows.  The first 32-bit program in their list was used.  I hope this can help others.

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• the volume button on my computer does not work, when I turn the sound upward just bar falls to zero, no idea?

  can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...

  Hi JacquelineStueck,
   
   
  Parameter by default on your computer would be to reduce the volume when inbound communications are detected.
   
  a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.
   
  b. click on apply. Click OK.
   
  If this does not help, perform the clean boot in order to identify the request at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Additional reference on:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• How do I place my computer to power on when I open the lid

  I want my computer to turn on when I open the cover, how do I set this up

  Hello and welcome to Microsoft Answers.

  Most laptops are already built to wake up from sleep, if you open the lid, but there is a bit of a plug: it depends on the depth of a computer's sleep is in.  If the computer is shutdown completely and totally turned off the power, open the lid will not (usually) turn it on.  This would be the manufacturer which built computer (they will have to build a hardware device which detects the opening and then triggers the power).  Why WIndows can't he do?  Well, Windows is not running, so the manufacturer will have to incorporate the functionality of the physical case itself.
  Windows peut wake the computer when he sees the open lid if the computer is simply sleep, because (without getting too technical here), even in "standby mode" there are still a few 'consciousness' to the rest of the system (Windows is, in some form of tiny, still active).
  I'm sorry if this isn't meet your direct desire to turn on, but perhaps it sheds light on why this is the case.
  PS. for what it's worth, I use only mode "Eve".  Unless there is an update requiring a full reboot, my laptop never actually gets "shut down."  Sleep in Windows 7 is very efficient and reliable, and I would recommend giving it a try.

• I'm download of Adobe Acrobat Reader, and when I start the download is just a white screen with no content. Why?

  I'm download of Adobe Acrobat Reader, and when I start the download is just a white screen with no content. Why?

  Hi Patrick,

  A blank window appears generally if the Akamai detects that your computer does not meet the minimum system requirements to run the DLM.

  In most cases the JRE or ActiveX controls are not enabled.

  Try to switch to another browser to access your download, or you can download it from: http://get.adobe.com/reader/enterprise/

  Kind regards

  Rave

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time!

  When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time! I installed the uprgrade and also did a virus check everything seems ok! I need a solution cause mozilla's browser that fits me better!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.