my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

Method 1

Refer to the article below and try the steps mentioned, check if it helps.

How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

http://support.Microsoft.com/kb/825826

Method 2

If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

I suggest that you put the computer in a clean boot state and check if it helps.

To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See the link below to learn more about how to clean boot.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

Tags: Windows

Similar Questions

  • Since the execution of an update of windows, I still lose my two network icons in windows Explorer.

    Original title: lost icons

    I'm on Windows 7 Ultimate 64-bit on a home network with two computers, and two network storage devices since I did a big update windows I keep losing my two network icons in windows Explorer, but I can see other computers

    Hi PeterHH,

    You're talking about the two icons of network in windows Explorer? Is storage devices?

    Method 1:

    You can try to run the network troubleshooter, and check if it helps:

    Windows wireless and wired network connection problems

    Method 2:

    You can also refer to the computer or the device manufacturer's Web site and try to install the latest version of the network card drivers:

    Update drivers: recommended links

  • my account has been hacked several times and sends mail spam to the people on my list

    my account has been hacked several times and is to send spam to people on my list. I changed my password several times and it continues to happen. I took everyone off my email list with the exception of an e-mail address that I created to alertme in the case of this kind of thing happens, it works. I pay for this msn messaging service and I'm upset that anyone can hack my email so easily. I want that stopped.

    It is up to you to use Kaspersky Rescue Disk 10 to remove any malware. The hot spare is a bootable Linux distribution that will search for and remove malicious software that can hide when the HD is active.
    Booting from the rescue disk will ensure the HD is not Active -Kaspersky Rescue Disk 10

    Once the system is cleaned up, contact MSN and ask another reset of password.

    Expert MowGreen Windows IT Pro - consumer safety

  • My password has expired on Windows 7 and I can't access the machine

    I have a Samsung Windows 7 Home Edition laptop. Last night, the password has expired (apparently without warning) and now I can't access the machine. I tried Safe Mode, but it returns the sign on screen. Tried to fix and had the same end result - a return to the login screen. There is only one account on the machine.

    When your password has expired then, you will be immediately prompted to enter a new password. Unless you enter a new password, Windows won't let you continue.

    No, I had not given the possibility to enter a new password. It's a stupid system to have passwords expire on home computers.

    What you say does not correspond with my own observations.

    Restart in Mode safe mode, and then log in as administrator. The password is usually empty. Now, you can reset the password for your existing account.

    When you're done, plan in advance and create, test and document a second admin account.

    To avoid that your passwords expiring, follow these steps:
    1 log in under an administrator account.
    2. click on start.
    3. type the three letters cmd in the search box.
    4. press on Ctrl + Shift + Enter
    5. click on "run as Administrator".
    6. type the following command and press ENTER:
    NET accounts /maxpwage: unlimited

  • Windows Update icon appear not to system tray when an update is available

    Whenever my computer gets an update I see the update available in the off option but not in the system tray. What a way to turn it on? I get updates via WSUS.

    It is likely in the corral of notification.  Next time you see the option off, display of the overlay alert icon, view by the clock and click the triangle to display hidden notifications.  Your Windows Update icon should be there, and you can drag it to the bottom to the toolbar set as a priority so that it is never hidden again.  Note that if there is no update to download or install, the icon will disappear as usual.

    If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

  • I have a doubt... the two Firefox syn account and firefox support account are the same or not

    I have a doubt... Firefox and firefox syn account for both are the same or not change support

    Hello shivarajnaidu, not for the moment these two accounts are completely separate, although it is planned to link the two of them on behalf of persona in the foreseeable future: https://login.persona.org/about

  • in some sites, there are two menus in competition and you can't use the bottom menu

    I've been using The Shopping Channel years but since I loaded Firefox I can't open certain areas of this site (and other sites). Menus appear to be in competition with each other. There is a regular menu below and a new "BOLD" menu on the top. If I need to look for the customer service, it is blocked by this "BOLD" menu on the top.
    I wrote to them several times, but they say that the problem is at my end.

    You can watch one of the extensions I posted above to increase the zoom of page and minimum font size.

  • Adobe Photoshop CC 2015 will not load the error that says "could not initialize because an unexpected end of file has been detected" I uninstalled and downloaded another app to the Cloud and the same error message shows up.

    No one knows how to solve this problem, said above?

    Hi computerdiane,

    Have you tried to screw up the Photoshop preferences.

    Steps to follow:

    To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

    Reference: preference file works, names, places | Photoshop CS5

    Let us know if that helps.

    Kind regards

    ~ Mohit

  • Pros and cons of use control the VM for HA

    Hello-

    I want to know if the turn on the 'enable virtual machine control' is an effort worth it.  At first, I thought that it would be a good idea because it would withstand a single dual-port HBA failure in one of our ESX host servers.  However, another Member of the team high a good point about the possible disadvantages when virtual machines are cut down to maitnenence.  I would really appreciate some comments about knowing if people have had positive experiences with relying on this HA option.

    Thank you in advance-

    I'm not for it.  I don't like the idea of having HA monitor my VM.  I think that there are 3 third-party products like SIM, MOM, BigBrother that work better.  After all VMM control heart rate.

    and there is also this question

    http://KB.VMware.com/kb/1007899

    just my two cents worth.

  • Assist in the creation of 2-column elastic, left sidebar, header and footer page, either on the CS5.5

    Hey guys,.

    So far, you have been a lot of knowledgeable people this fantastic, charming and helpful! (Oh, regarding my previous posts..., of course!).

    Yet, for now I just found out that Adobe Dreamweaver CS5.5 has truncated the amount of layout options, in comparison it is predecessors.

    This came to my attention since I started reading the tutorial from Adrian Senior. Design with CSS - Part 1: understanding the Concepts of Design CSS.

    It seems fantastic, rich in content and information. However, I have not seemed to Excel past that... considering so he asked me

    create a 2 elastic column, left sidebar, header and footer layout.

    I did my own research, lately, even if she has been without success. A tutorial that I read on the website of adobe asked that I should

    Download a Dreamweaver Exchange product. Finally, I downloaded the package Flexi CSS layouts... Yet, I have not really found much use.

    If anyone has answers or suggestions to my problem, it would be fantastic!

    Take care!

    -Joshua.

    (NOTE: if it does something easier, I'm referring to "Figure 2" in the Designing with CSS-Part 1: Understanding CSS Design Concepts Adrian powers.-> http://www.adobe.com/devnet/dreamweaver/articles/css_concepts_cs3.htmltutorial page)

    elastic column 2, sidebar left header and footer... It's right there in the CS5.5 choices.

    Simply select New > blank Page > more and you will find it

  • Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

    I recently bought an Acer TimelineU M5 - 481 T-6642 14 inch Ultrabook.  During startup and shutdown, there is the CD/DVD tray noise as if the status bar is trying to open. I did not a CD or a DVD in the tray again.  How can I stop this sound action, annoying in my new ultrabook?  Thank you.

    Mine makes no noise noticeable at startup or another so I would get the extract.

  • Pro and Con of SSD for the OS

    I know I've seen some Pro advantages and disadvantages for the use of the SSD as your operating system drive, but I can't just find much info.  Search here is not the best.  Can some of you explain why you or don't use SSD.

    Thank you
    Phil

    Adobe forums: Myth SSD unraveled

  • Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

    Original title: basic computer.

    I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

    Hello

    Go to the Dell website and download the drivers for your model computer.

    http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

    Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

    See you soon.

  • Binds a guest operating system to one of the two network adapters on the host computer?

    Sorry if the topic is confusing.  I have a host operating system to Server 2008 running on a server that has two network jacks.  Allows to call an (192.168.10.24) and B (192.168.10.25).

    My guest operating system is set to bridged with the IP 192.168.10.26 mode

    I want to say VMWare to always use A NIC when it comes with this guest operating system.  Is this possible?

    In my (Control Panel Windows) network connections, I see my two NICs A and B as well as VMWare Network Adapter WMnet1 and VMnet8.

    Thank you!

    Run the utility for configuring the network (vmnetcfg.exe) as an administrator on the host computer, disable the automatic bypass, set vmnet0 to one of your physical network cards and a virtual NETWORK adapter not used, such as VMnet2, and then assign the other physical NIC. Then to your comments, change its settings and select vmnet0 or vmnet2.

    Guy Leech

    VMware vExpert 2009

    ---

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  • Network keeps falling and reconnection - HP's ENVY touchSmart m6 sleekbook.

    Original title: HP ENVY touchSmart m6 sleekbook keeps falling and reconnecting network connection

    While on the website connection is deleted without warning and after a few minutes reconnects to the server used previously. The computer is new with window 8. Try to find out what causes gout and prevent it from happening.

    I had the same problem with mine.  I'm still not sure I fixed it completely, but I found that there are two network cards installed and disabling one of them seems to help.  I found it under device manager.  I have disabled the microsoft network card.  I hope this helps.  Good luck!

Maybe you are looking for