My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?
My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?
Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.
Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.
If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.
-steve
Tags: Windows
Similar Questions
-
How can I fix it? or what is wrong now?
Hi Stelana,
If I understand correctly, the computer turns off when you want to disconnect.
This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.
To refine the question, I suggest you try the following steps:
Step 1: Disable the security software and test, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Activate security software once it's all done.
Because this problem occurs after cleaning registry, critical registry keys may have been changed.
Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.
Please see the link below:
Registry cleaners are needed?
http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary
Step 2: Run a scan online for any threat and try to correct
http://OneCare.live.com/site/en-us/Center/cleanup.htm
You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
To remove the error message about the network drive
I have W7 Home and recently restructured. I had this problem of reformatting finally a long time ago and it is solved but do not remember how. Whenever I boot, I get the message "connection impossible network drives. When I click it, I see the Epson printer has a red X on it and says Epson memory card. The printer has always shown in my computer, but it works very well. All I need is to get rid of the error message. I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring! Thanks for any advice.
Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts. They say that it is a Windows problem, not them.
To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive. I find the error message disappeared and the printer works fine. I don't know if there's a problem with that.
-
My computer has stopped recognizing the printer plugged in usb port
Hello
· You are able to print a test page for your printer?
You can try the suggestion given in the article below and check if that helps get the printer to work.
http://support.Microsoft.com/kb/308028
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: Windows Update does not work on security with networking mode
Hi, if my computer has been doing the BlueScreen thing where it stops every 5 minutes when I go to normal mode. So I go on security with networking mode and I went to problem and solutions and all this stuff, and the Web site that came to help me solve the blue screen was told to go to "All programs" and then go into "Windows Update". but the problem with that is does not work! My cursor will give me the circle of loading bit for a few seconds and that's it! And don't tell me to go to because every time startup repair I have try that he asks me "User" and I tried everything and nothing will work! :/ And apparently, it's a driver problem, not a hardware problem, because I already removed and put in the back of my equipment. Then Yes.
Thanks for your help! :)
Windows Update does not [Safe] mode with network
Yes, that's correct. You can not run manually check updates in Mode safe mode with networking since the necessary Services are not running.
-
The write button has disappeared from the taskbar. How can I get that back so I can send emails?
Thank you very much. It worked! You are a genius! A lot of people in computer science I know tried to solve the problem and he could not understand. Once again, thanks a lot!
-
I want to download Windows Mail as it is a more updated from Outlook Express version, my computer has Outlook Express preinstalled on it when I bought it but I have never used, it would be better to uninstall Outlook Express before you install Windows Mail or do I need to keep Outlook Express on my computer where Windows Mail needs to use some of the files I don't want these two e-mail on my computer programs as they would take so much space on my computer.
original title: Windows Mail DownloadSure. You can download and install WLMail 2009 on your XP machine. I have no idea why you prefer on Outlook Express, but each to their own. -
I have a computer set up at home as a hobby-Web server, designated 'Server', Windows 7 Professional (Swedish language version). The server has installed Norton Internet Security. Standard port in the firewall is open to allow remote desktop connections.
I can't connect to the server by using remote desktop, unless...
When I open the network - and center of the share on the server, under view your active networks, my internet connection ('designated network 8' by Windows) has the value 'Public network '.
I can not connect to the server.
If I change "Network of 8" to "Home network" or "Work" - so I can connect to the server by using remote desktop.
But if I put the adapter network/public IP of my server to "Home network", is not my compromised security more than it already is when I encouraged Remote Desktop? I don't want to let my Internet connection to the home network, because the point of having different settings is because I want to have my internal network to a lower level of security for access to the network drive.
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you have a query.
I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.
Check out the link:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Networking troubleshooting maxed out. Need help
2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.Hello
Check if you are able to access the computer.
(a) press the Windows key + R.
(b) type the name of the other computer in the open: box in this format:
\\computer
(c) press on enter
You can also try the steps of troubleshooting provided in the link below.
How to troubleshoot a network home in Windows XP
http://support.Microsoft.com/kb/308007
See also;
Network map doesn't display your Windows XP computers
http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx
-
Today, I went in a transaction of withdrawal in Microsoft Money 2005 and used the option 'print '. It does not have the option 'Print cheques' as he has always in the past. How to print the check now?
Support for MS Money ended on January 31, 2011...
01/31/2011: the end is near! If you have not already meditated it, now may be a good time to start... (01-jan - 11 & ff)
http://social.Microsoft.com/forums/en/money/thread/2a40ad46-2258-4637-8941-9a1dc9a624aa~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You will find support remaining (as it is) for MS Money in this forum: http://social.microsoft.com/Forums/en/money/threads
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
Original title: NET USE worked for error.
OK I used the following with a RDP'ing of XP in a server of S2k3 years:
NET use lpt2 \\SERVERNAME\printername /persiternt:yes
now, I get a "system error 67has has occurred. The network name cannot be found. »
What made me state was I restarted my XP machine.
What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...
suggestions?
Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.
-
Range of all-in-one printers, HP Photosmart 7510
The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer) It prints fine from the computer, however. HP ran diagnostics and cannot find the problem in their system. Suggested that I try to find a solution to the millisecond. I was unable to find a solution yet. Can anyone help?Hello
I suggest try to connect your printer to the computer and check if the scanner works. -
I would like to uninstall Acrobat 8 standard from the old computer to transferit to the new. How can I proceed?
Hi paolam91006398,
Make sure you have the serial key & CD of Acrobat 8 Standard before installing it.
Also be sure to turn off before you uninstall (Acrobat Help menu-> disable/Sign Out)
Kind regards
Nicos -
I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?
It won't matter because your copy of CS2 and serial number no longer works. You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period. The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
Maybe you are looking for
-
Portege M400 - BIOS password of change within the OS without knowing password?
Hi all I hope I can get help / advice from someone with more experience with the M400 if possible? I reinstalled the operating system and the configuration of the biometric security for me, which worked perfectly! However foolishly I also configure s
-
Satellite A80: How to restore the audio and video codecs?
How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.Now, I need to put the video standard i
-
Re: Message from Usb hub root
Hello I'm doing some research for my friend who has a laptop, model No.Toshiba Satellite A200 system UniModel PSAF0A-02L0K number He recently bought an internet wireless USB When it connect through USB ports, he receives a message from USB root hub a
-
A friend sent me a xlsx file and I can't open it. I have windows xp home edition, which has the worksheet instead of excel. Can I convert xlsx files xlr.
-
Sometime last year I tried to change my vista desktop theme and I found that the screen wasn't there everything I had, it was the style customization options old XP offers windows xp and style classic and high definition. I thought it was me being st