my computer hp pavilion laptop is not bluetooth, is it supposed to be this type of laptop?

Similar Questions

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• Pavilion 14-v229TX: computer keyboard pavilion laptop 14-v229TX

  I just got my new pavilion laptop, but have some of the keyboard problem.

  For example, the '@' is not no key "shirt + 2" and is the key "shirt +'". "." Some problem happen on other simbol of a few institutions.

  Please advice what should I do?

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

  I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

  I checked the BIOS and power settings are not there. (Version of BIOS F.32)

  I have checked boxes to allow devices to wake the computer in the management section of power without success.

  I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

  I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

  Hello @jpk717,

  Thanks for the information!

  Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

  USB - Windows 8.1 Recovery Kit 64B

  You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

  I hope this helps.

  Have a great weekend!

• 90 b error g7-computer 2215dx Pavilion laptop

  Hello

  I received an error of 90 b system fan and the fan was making noise, almost like a rattle. I have owned my laptop for about a year and a half. (He is more under warranty.)

  I cleaned the vents and the fan with a vacuum cleaner.
  I did a hard reset.

  I have the BIOS updated with Windows 8.1.

  After all this, I finally replaced the fan. (I have replaced the thermal paste).

  The first time I turned on the computer, it was very slow. However, I do not have an error message and the fan was not running as fast as before when I turned on the computer. We whisper quiet. The fan does not make noise either.

  I reset the computer and it got a little faster, but it was still very slow. He got very hot around the fan. However, the fan did not have a faster because there wasn't an increase in noise.

  I did a hard reset. When I turned on the computer, I got the error of 90 b again.

  I'm at my wits end. Can someone help me please?

  Computer: Computer laptop Pavilion g7-2215dx

  I disassembled my laptop again and it turns out that I forgot to plug the fan on the motherboard. I think the noise of 'fan' was actually just the laptop itself. Oops.

  Thanks Mrstenter for your help.

• Computer HP Pavilion laptop g6-1142sl impossible to switch between video cards

  I recently bought a computer laptop 'HP Pavilion g6-1142sl"on the"Windows7HomePremium"operating system, I installed the game. Then I noticed an FPS very low for 1 GB video card
  When I pointed out the existence of two switchable between themselves for acquisition cards. I figured out how to move, but has increased to 10 FPS
  I have thought that the problem is in the drivers and downloaded the software to update their "Driver Genius" and then updated the drivers for the cards and a few other devices, but then after a reboot has lost the ability to switch the video card by pressing a right click on the desktop. on the FPV was even lower, I translated the BONES of Italian in Russia formatted the D drive and has not discovered that more later I deleted the backup system recovery
  I turned the system is fine, but I found myself with no recovery!

  problem

  

  After clicking on the AMD Catalyst Control Center

  

  problem

  

  PS help me to solve this problem on the front thanks

  Sincerely cloned

  Hi cloned,

  For graphics AMD/Intel switchable works correctly, you must install the package AMD custom software on the following link - this package provides both the card ATI and Intel as well as the Catalyst Control Center custom drivers needed to control them properly.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55025.exe

  When the installation is complete, restart the computer before checking it in.

  Kind regards

  DP - K

• Computer HP Pavilion laptop g6 sound disappears.

  Hello

  I have a problem with my laptop. When I feed my camera everything is fine, but then... we go several minutes sound disappears. The strange thing is that "mute button" on my keyboard does not respond too, when I hit him theres no light orange and the other the screen appears a lvl of volume (normally, it should be a cross-volume lvl). When I want to play Spotify or something like that, he said that my sound card is being used by another program... The funny thing is that when I did something like 'stress test' (I played Spotify when its worked just after the system startup) sound worked for about 6 hours and everything was fine. I hope that I will find any type of need here.

  System: Windows 8

  Model: HP Pavilion g6-2310sw laptop

  Also, I want to add that each system reboot solves this problem but only for a period of time (several minutes).

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• computer HP Pavilion laptop g6 missing drivers w7

  Hello, can someone please help me find drivers for Windows 7 for my HP Pavilion g6? The hardware IDS are:

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_188F103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS + 188F103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  Controller of Univeral Serial Bus (USB)

  PCI\VEN_1022 & DEV_7812 & SUBSYS_188F103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_188F103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Please and thank you!

  Hello:

  For the USB3 controllers, download and install both of these drivers...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836&SP...

  Ethernet: Download and install the second pilot on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Since you did not complete your g6 model number, I can only imagine what version of the driver Atheros card wireless you need.  It is at least 4 different and only work.

  I'll take a random and after this estimate.  If it doesn't, I'll have the full model # of your laptop.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• My computer hp pavilion laptop runs very slow please help

  I bought a computer hp laptop pavilion g6 with i3 4 GB of ram and 1 GB graphics. It is only 9 months old and I've used it about 50 ~ 70 times alone. And now, it is very slow. I installed only 26 programs and no any program is larger than 1.5 GB but now it is running very slow and am very lag. So please help me what should I do?

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Locate the computer dv6920ei Pavilion laptop info

  I can't find my dv6920ei of Pavilion on the support Web site, why?  I need to replace the display screen and cannot find this model listed.

  Hello:

  Here is the link to the support page and drivers for your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=3785683&CC=US&DLC=en&LC=en&os=228&Query=dv6920ei&sw_lang=&Tool=

  The service manual is at the link below.

  The list of parts shown with reference numbers are in Chapter 3.

  http://h10032.www1.HP.com/CTG/manual/c01295877.PDF

  Paul

• Computer ze2315us Pavilion laptop memory upgrade

  I have install 2 GB of ram in the system, and now it crashes at startup, after talking with a technician in Kingston, he said that my system could a maximum of 1 GB, 2 x 512. My question is there a flash update or a way to change the max memory in the Bios?

  The controller memory your laptop uses ATI RS200M series of Northbridge. It may only be able to treat up to 1 G (2 x 512 MB).

  There is no update of the BIOS can increase the address space for this memory controller and therefore it is the maximum space of memory for this series of laptop.

• I have Windows XP Professional and I can't install programs because the computer says 'Windows install' is not present. How can I solve this problem?

  When you try to load a program I get the message "this package requires windows install." You should at least install windows "2.0"on your system." Is it possible to fix this?

  Update Windows Installer:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4

• My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted.

  My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted. Did this happen when I had an update Windows online? Or a security update? How can I repair quickly and get back in the business? These drives came with my Dell Pentium 4 computer and are not external drives, by the way. And how can I keep it doesn't happen?

  Hello old gal,

  Thank you for your message.  Please visit the following link, there is a fix - it tool that should solve your problem.
  http://support.Microsoft.com/kb/314060/en-us/
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Print server - you do not have sufficient permissions to connect to this device

  Hello all, received a tricky for you.

  Have several printers of various types and brands that are shared on a 08R2 print server
  All users have even permission sets.
  All computers built the same, running Windows XP, fully patched
  Print drivers are the latest universal drivers for any printer model to help, with most HP, Dell and Xerox.

  A user on computer A can connect to the printer without any problems
  User on computer B receives, you don't have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer A gets you do not have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer B can connect to the printer without any problems.
  User C can connect to the printer from any computer without any problem.
  User D can not connect to printer from any computer.

  Once, all users have been confirmed 4 times to have the same exact permissions. All user accounts have been re-created at least twice at this stage. All systems that have been tested have been rebuilt at least twice, the print server started as a 03R2 with this same problem and has since been switched to different materials and is now running 08R2 and still getting the same problem.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads