My computer installed all updates for Windows (I was invited to do so). Now, I can not use citrix to access things. Frustrating

Similar Questions

• I just updated my computer and I have a windows 7 disc that i percisted and now I can not turn on

  Windows was ok on my old system, but my windows is a disk of oraginal were brought from the United Kingdom

  When you install Windows and activate it with a specific product key, only one instance of WIndows is always linked to this PC.  A Windows license cannot be transferred to a second PC.  Each PC must have a single Windows license.  Only if you buy a different product key you can install and activate on another PC.

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• security update were not installed security update for Windows XP (KB956572) (update 1 of 1)...

  security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
  kindly help to solve

  Hi DEVOO,.

  Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/

  Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I downloaded and installed and updated for Windows Vista Ultimate Edition. I have received a warning that a file is missing or damaged. What's past and how to fix my computer running again?

  I have my computer set up to warn me about available updates.  I downloaded the update for Windows Vista Edition full and proceeded with the installation.  To restart my computer, I receive a message that a file is missing or damaged and reinstall drive does nothing.  I bought the computer from a colleague about 3 years ago and until recently just used it to play DVDs and music.   In July, my son set up a wireless network I can use internet on this computer and my main on a floor.  What happened and how do I get my second working computer?    File: ntoskrn1.exe, status: 0xc0000098.

  Hello

  I suggest you to refer to this link and check if it helps: http://social.technet.microsoft.com/forums/en-US/itprovistasp/thread/4dc56ab0-3db9-4ff0-b156-864394fe6c04/

  It will be useful.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Windows Update won't install platform update for Windows Vista, and I can't find it anywhere to download.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/971644

  How to get the platform for Windows Server 2008 and Windows Vista Windows Update updates

  Update for Windows Server 2008 platform and the platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     Click all programsand then click Windows Update.

  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  For problems with Windows updates:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Failure to install security update for Windows XP (KB2686509) error code 8007005 0 x.

  I recently enabled Microsoft Update for my XP Media Edition 2004 after his being unavailable for a year due to corruption Trojan. The solution that worked there was rename the CATROOT2 folder and the SofwareDistribution folder in the Windows directory in the Windows > System32 directory and reboot. This solution came from the Microsoft site. After that, I was able to download and install 50 of 51 updates. A fails repeatedly: update for Windows XP (KB2686509) security. I get error code 0 x 8007005. I tried several fixes, including one designated for error 0 x 8007003 (rename file) download at download.old as well as the use of aggressive mode on Microsoft Fixit. Always fails to update. All other updates installed correctly, including a new this morning, but of course update continues offering that failed. Any ideas on how to get this installed? This is a relatively new, so I'm not sure that the problem is that it is already there, but the first failure was around 40 of the 51 when I check the history update file. Thanks for your suggestions.

  Hello

  I suggest you consult the site mentioned below:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.microsoft.com/kb/968003/en-us.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am running microsoft updates and ITMU and will not install an update for windows xp (KB2641690)

  I am running microsoft updates and one update for windows xp (KB2641690 will not install)

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• should I install the update for windows xp sp3? He is later offered to me automatically.

  I ran my usual the taskbar Windows Update, and it's give me Windows XP Service Pack 3.  I think this is the first time, he offered an upgrade to me on this pc.  I remember something in question about SP3.  Should I install the upgrade?  Help, please.

  Yes.

  Quote: To continue to receive updates for Windows security, make sure that you are running Windows XP with Service Pack 3 (SP3). For more information, refer to this Microsoft web page: support is ending for some versions of Windows

  FYI

  1. How to obtain the latest Windows XP service pack
     http://support.Microsoft.com/kb/322389

  2. Release notes for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/936929

  3. The space of hard disk required for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/947311

  4. Steps to take before you install Windows XP Service Pack 3
     http://support.Microsoft.com/kb/950717

  5. List of fixes included in Windows XP Service Pack 3
     http://support.Microsoft.com/kb/946480

• Cannot download and install the update for Windows Vista (KB2481109) security

  Up-to-date security for Windows Vista (KB2481109) and update for Windows Mail Junk E-mail Filter [March 2011] (KB905866) ideas?

  Error codes displayed are:

  Code 8E5E0147

  Code 8E5E03FB

  But without any answers of MS

  Anyone able to help?

  Thank you very much

  Hello

  you are this posting in the wrong forum

  It comes to the installation of vista operating system instance

  try this or repost

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx