My computer is Mac, did not note that downloading
When I logged in I did not notice anything sking me if I had a mac or a PC. This will cause a problem on appeal?
LJ
If you have downloaded the correct version, it won't make a difference.
Tags: Skype
Similar Questions
-
I live in a rural area that does not have consistent internet access. questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?
That is, the work programme is located in my computer or is it online?
Thank you.
adobe (and perpetual license) subscription programs are installed on your computer. You need to be online for installation and activation, and then you must be online periodically thereafter.
with a monthly subscription, one time every 30 days is necessary to maintain your activation. for an annual subscription, all 91 days once is enough. These checks online to check your license status.
-
Stop computer, Open firefox, did not restore session page
I just installed something that apparently made Bing my homepage, and I don't have an option to restore session. Earlier, I registered normally, but no page appeared when I opened later. I wonder how to get back my last session at this point. The option 'Restore previous session' did not show up, so now I am just stumped. Does this mean that I will get the restore session if I register normally, because technically, it's not an accident?
Hello
Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
- Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
I have problems with adobe reader, an error 1327 Invalid drive. I tried to remove adobe readr = er of my computer, but it won't let me. There is no need that I can't use it... why I can not remove
Windows 7
-
I thought I followed the article to the letter, but when I copied the profile folder saved on the external hard drive in the folder of Mac profile, he brought over all of my stuff. Can someone help me with this. I would be so grateful! Thank you Kara
IN PC
- GoTo Thunderbird > help >
- Basic application > profile folder > click "view folder".
- Completely out of Thunderbird
Copy the entire folder on the external drive
IN MAC
- GoTo Thunderbird > help >
- Basic application > profile folder > click "show in finder".
- STOP completely from Thunderbird
Copy the profile from PC to MAC profile before copy to change the name of the profile
- PC profile name '45eilnx4. By default'
- MAC profile name "79Aojka5.Default".
Replace the "45eilnx4" "79Aojka5" and copy it into the profile of MAC and overwrite the files.
Open Thunderbird and check it out.
Always your getting the question, explains in detail on this.
- GoTo Thunderbird > help >
-
I just got this call from someone who claims they called everyone with Windows Explorer due to a known problem. Be wary of scams, I put them through the drill. He made it seem like he was representing a company called Global (four words, wish I could remember) who did this for Microsoft. I followed all the steps. He had me begin by raising eventvwr that doesn't show a lot of errors and warnings. I they have remote access (while being very nervous), and it seemed that they checked tips and the processor. He said the person who will fix it then call me. That person grew up the PCSpeedy site and asked how I was paying. I said I was not pay, they called me - and if it was a problem of microsoft as the original caller said it would be a free fix. So after getting him to believe that I needed to think a little about it and had the free toll number written down, he hung up, and it resembled the regularized remote person. I don't see new programs and are not all the problems have not yet, but I'm worried - is there a way to check that they do not have access to any confidential information? Or leave anything on my computer? And those errors and warnings were put there by them, or is there really a problem with my computer? Can they be stopped from preying on people?
HelloIt is a scam and they are trying to convince you that your computer has a problem and to provide technical support for a fee. They might say free at first, but when they found a problem in your computer. They will charge to solve the problem.
-
I tried to do a restore to factory on my computer but the frame in the score which is supposed to be there is not there at all so it didn't work. She asks a disk but when I bought my computer I never received one, is there anyway you can help me? Thanks for your time.
Read more about my first answer for you.
They are your remaining options to reinstall.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can also contact HP and ask them to send you a set of recovery disks.
They should do this for a small fee.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista."
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
«How to activate Vista normally and by phone Activation»
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
All Adobe Creative suite web premium cs5 has been installed without any problems.
The Acrobat Pro also no problem.
What do I need as a number lisens for Indesign when it does not accept the original number of lisens cs2.
It will not be installed without. What should I do?
In this case, it is best to contact the Support from Adobe and check with the question.
Activation server is no longer available for version CS 2. However, check with Adobe customer service, they have certainly you will help accordingly.
[Click the button still need help and select the Chat option.]
-
Where can I download Photoshop CS6 with my master's degree I already bought? I was sent a disc to load, but my laptop doesn't have a hard drive. Help!
Hi Orazioslivano,
Please use the link below to download Photoshop CS6.
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
Please post on the Adobe Forums.
-
I just replace the memory of the motherboard, processor and ram in this system, I did a fresh install of Windows Vista Edition full. Now I get these errors which began with the .net error is not able to install. I went and downloaded .net 4 for stand alone, and very comfortable. Seems that when you use the Windows Update is when I have problems. Why do I start having these issues now? What can I do to fix this? A new disc of Vista Ultimate would repair my problems or is it the way the system is windows reading?
Download and install 'SP2' manually because it contains all SP1 fixes: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
Never be afraid to ask. This forum has some of the best people in the world to help.
-
Download stops at halfway through, copy the BEETHOVEN WMA 9866fb57abdc0ea2f5d4e132d055ba4e error I was given this DIMENSION 9100 as a gift by a friend who went mac, (not so sure a gift). Last used 2005, took off from Norton not replaced by McAFEE, no problem with passing, no problem with the sp3 updates just. Read Q and a, is a commentary on the Member CARRINGTON 0212 surgests error code 9866fb57abdc0ea2f5d4e132d055ba4e is a smss.exe (whatever it is) and could possibly be malicious masquerading as a legitimate file (as I understood) and should be in the C drive, so to this end, I checked the C drive and it reads : c:/i386 c:/i386 System 32 smss smss smss c:/windows/system 32 smss c:/windows/software distri... Any help with this would be greatly appreciated, but please keep in mind that I'm not the fastest chip on the motherboard, it would be SSIMEP to say that I would need instructions on how to get a newspaper, so keep it simple please. Thank you very much
Should be formatted and started clean when you got it. Should probably be done now after you backup the stuff you want.
--
Martin Stanley
MS - MVP
--
How to ask Questions the Smart way
http://www.CatB.org/~ESR/FAQs/smart-questions.html -
What was wrong in my way to download windows7?
If at any time the upgrade fails, Windows Anytime Upgrade Fail:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
How to activate a second computer?
You are allowed to only install two, so you should just be able to put in your activation number. Usually there is a button saying you bought the program. Just click on it and if you should put in your activation code.
-
The person calling said he could give me a technical support for problems that they had detected with my computer, but he seemed surprised when I said that I had problems with my computer. I did not understand a lot of what he was saying because of his foreign accent. Can someone tell me what it is? I don't think that I may have a virus, but Windows actually call for help?
You were lucky that you could not understand him and so do not buy what he was selling. It was a scam. Microsoft does not make unsolicited phone calls.
Insofar as thought, you could have a virus...
- What version of Windows (XP Home, XP Pro, Vista, etc) and Service Pack (none, 1, 2, 3) is installed? If you are unsure, do a click right my computer and select properties for information.
- What is the name and version of your anti-virus program? Is his current subscription and has it always been updated?
- What other security software is installed (names and versions)?
- What are the symptoms? That's what are you see you do not, you should see or what is you don't see don't you think you should? Please report the full text of the error message without paraphrase.
- What happened to your computer shortly before the symptoms started? Power outage (including pulling them out the plug or by pressing the off button); use of a registry cleaner, optimizer, tuner, etc. ; installation of an update (only one?). Another thing that you can identify.
-
Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)
Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.
My Boot.ini file at this time was:
[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetectI looked towards the top of this help page, but for now I'm unlucky:
http://support.Microsoft.com/kb/314477
(The next steps I took by throwing from the Windows CD and go into the repair console)
I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.
He gave me something like:
[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetectI also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).
I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".
I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.
I've also marked the partition on the D: as active (in computer management), but it did not help me.
I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...
My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?
Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx
Could a clean install two HDD help? I hope I won't have to do...
Someone has an idea?
PS: I'm not such an advanced user so I need a solution step by step, thanks!
Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.
Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...
In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).
In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html
(except I've had the first installation already done).
Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.
EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!
Maybe you are looking for
-
CAVEAT! Problems with Firefox 29 Add-on of FEBE recheck your settings
I discovered that my settings were changed.
-
Spotlight doesn't seem to work with 2 letters for me. (for the most part, but with a few exceptions, it will work with 3) If I type a letter, it works although the list seems quite limited If I type two letters, it works although the list seems quite
-
ProLiant ML10 v2: SUSE SLES 12 initialization failed on the Proliant ML10 v2
Hello I'm trying to install SLES 12 on the server above. It seems that the installation is successful. But when reboot the server, I can not go in the SUSA, but get the following message is displayed: Boot from the local disk... Initialization failed
-
Leak memory in a simple loop to save data in the table?
Hello world I'm trying to set up a simple code to read a certain amount of data in a table at a fixed sampling rate and put these data in a local variable. I'll put this on one OR cRIO-9073 using the scanning engine and the data comes from one NOR 9
-
4415 proBook s: replacement of the optical drive - need a support and screw
Hello I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdire