My computer is turned off and when I grew up it is stuck half half reg operation see safe mode.

Similar Questions

• I was on the internet and my computer automatically turns off and now when I press start for most all my programs do not appear and saying all the folders are empty

  Windows Update no longer works and my computer is extremely slow so

  Hello

  1. have you made changes on the computer recently?

  There is a possibility that another application is at the origin of the conflict with Internet Explorer. Let us check in safe mode with network and then we can check in clean boot to find the root cause of the problem.
  Step A.
  Please check if you are facing the same question when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.
  For more information, refer to the article below.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  Step B.
  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

• my computer is turn off and gets very hot after a half hour

  for some time my computer is to do really hot after half an hour when im using it and then after a few minutes its deactivation and I have to wait like 20 minutes because he does not want to go back. It has been like that before, but it's only like 4 times... but now for 1 month it turns off... Please help me.

  Hello

  Question of heat and ventilation. If a PC remove ALL power and reinstall the cards memory and cables (both
  in fact, ends) - remove and replace them - are not just tight. Try adding a small fan blowing in or
  through the ventilation openings.

  If those who don't erase the question that you should seek immediate help from a real computer (no leeks store
  and the glances at a BestBuy or other big box stores) or the manufacturer of your system Support.

  Heat can cause very serious problems with your hardware in order to not try to solve this one more
  minimum without professional technical assistance.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer will turn off not when I use the start menu, it is as I have not yet hit shut down. I have to press the power button to turn off.

  It happened once before and I don't remember what I had to do to fix and I can't find this post to remember.  Thank you in advance...

  Hello

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Windows stops responding during Windows XP shut down

  Advanced Troubleshooting for shutdown problems in Windows XP

  Hope the helps of information.

• My computer is turned off and restarted. Now, it is said, I have 3 days to activate Windows.

  It was activated at least 2 years ago. I don't have the CD with me as I am a foreigner. What should I do to keep my computer running past 3 days? Why do I need the CD or simply enter the reg code?

  You must reactivate your win7. It is a common problem in Windows 7 after installing some software which repairs in regedit. If you can not access your win CD, start CMD in Administrator and run this command

  slmgr-rearm [press ENTER]
  
  
  CMD: Start = > all programs-online accessories-online right click on command prompt, select run as administrator.
  
  
  Now, you have 30 days to activate. find your CD Win7 and active it. If you cannot resolve your problem, write to me at istijlal [at] gmail.com. I'll send you a small program can solve your problem of activation.

• I was updating my iPhone 6-9.2 software, you know how it turns off and when he comes back you put up again? Well Meanwhile I continue to receive messages from text/iMessage

  I always receive text/iMessages while the phone is updating new software

  These are 2 different questions.

  Question 2 - No.

  Question 1 - (in the title of your message) when you have finished the installation process, you should begin receiving messages again.

• My computer does not remember my e-mail address once the computer is turned off and then, even with the box "remember me" checked.

  I tried mthe ' internet options, privacy settings, etc., "and parameters to allow the appropriate cookies and this does not help.

  You must enable AutoComplete in internet explore...

• the display is turn off and when I press on who I want to see the details

  It shovs

  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1062

  Additional information about the problem

  BCCode: 116

  BCP1: 85366510

  BCP2: 8EE329B0

  BCP3: 00000000

  BCP4: 0000000C

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Bucket ID: 0x116_TdrBCR:C_Tdr:2_IMAGE_igdkmd32.sys

  Information about the server: bddeaa5e-0a75-449c-ba5a-01471578e9f4

  BCCode: 116

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.

  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.

  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.

  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time.

  Good luck!

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• Task failed when the computer is turned off

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs. How can I force this task runs next time I turn on the computer?

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs.  How can I force this task runs next time I turn on the computer?

  You're overthinking this problem.  Simply configure tasks planned to inform you of missed tasks .  If the date of scheduled backup has been a weekend or a holiday with the computer off, the next time you turn on the computer you will get a notification that "some tasks did not run."  At this time, manually start the backup job.

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

• The trash empties automatically when the computer is turned off. How can I fix it.

  The trash empties automatically when the computer is turned off.  How can I fix?

  The trash empties automatically when the computer is turned off.  How can I fix?

  Find what to do (something you installed and/or took the time and effort of installing) and undo - because it isn't Microsoft / default, or even something extremely simple (not something inadvertently, you can check, etc.) to (that happen.)

• Hi why my iphone wifi turn off automatically when I lock my device? And how can I solve this problem

  Hello

  Why my wifi from the iphone 6 turn off automatically when I lock my device? And how can I solve this problem?

  Yes, it's designed for it. If, however, you plug, WiFi will not drop when the screen is locked.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you