My computer it does not turn off when I go early and turn it off?

My computer it does not turn off when I go early and turn it off? u can help me, please!


·         What operating system do you use?

·         Did you do last changes made on your computer before the show?

If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

You can't do a computer that runs Windows 7 stops or sleep

If you use Windows XP, see:

You cannot log off, restart or shut down your Windows XP-based computer

See also:

Turn off a computer: frequently asked questions

Tags: Windows

Similar Questions

  • My computer (xp) does not start, just keep trying to start and recycle. Does not start in the chest or any other mode.

    Tried the recovery disc, and he said he couldn't fix it, but I don't know if I'm doing things.
    I tried the xp disc and run Setup, after that he installed something that he said that he could not find a hard drive of the computer

    Restore the previous settings, repair facilities, and retrieve data.

    XP forums:

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • The computer screen does not turn off after the specified power Options

    I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

    I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

  • I want to remove access from my computer it does not turn off

    somehow my computer won't come until I close magnifying glass. I want to remove it from my computer


    Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

    also read the tutorial above while turning the magnifying power.

  • My battery does not charge even when it is plugged and my orange light blinks when it is plugged.

    My cord broke first, then I got the exact cord to fit my computer. Them I got 75% battery charge, but even when it is plugged in the light to connect it to the computer itself has never been white once again, it flashes orange. Now, I'm down to 2% and I tried to load it. It will not be loaded. I tried to take the battery out and just have it is plugged in, but still it flashes orange. Not white as before. What could be wrong?

    The battery? Batteries will you know. Tried to contact the Office of support for your laptop brand?

  • Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

    When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

    Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

  • When I turn on the computer, it does not show my office. It comes up with a white screen

    Original title: bad start.

    On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?


    Method 1:

    I suggest you to select last known good Configuration in Windows Advanced options and check if it works.

    To do this:

    a. restart the computer and press the F8 key for about four to five times.

    b. you will see the that last known good Configuration in the Advanced Windows options.

    c. Select last known good Configuration and press enter.

    Method 2:

    See the article and check if that helps:

    What to do if Windows does not start correctly

    For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.

    Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

    Let us know if it helps.

  • Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

    Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

    Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

    Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

    Now, I can't turn off the monitor, except by turning off the computer.

    Hi JDandGinger,

    I suggest you follow the provided article and check if it helps.

    If the problem still persists contact the manufacturer of the monitor for more help and information.

  • My computer does not turn off, it crashes on closing.

    My computer does not turn off, it crashes on closing.  I have to press the Start button, in the hold, and then after 20 seconds it turns off.  Often when I turn on the next time, it sometimes says Windows is not stopped successfully, but I know that all my programs had been closed.

    My computer is Dell and my package is Windows Vista.  I have McAfee security set up and I bought Uniblue to try to help, but not joy.

    I wouldn't use anything done by Uniblue, it does not work. It will make things worse.

    I would like to uninstall Mcafee, and then use the removal tool to remove it completely. Install rather program AV from Microsoft.

    If you need help I see what is running with teamviewer. You'll see what I'm doing. If you get this, give me the ID and the password. So I can log in. Or if you use Skype, add me. My Skype name is the same name I use here

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

    My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear


    It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

  • just installed thinkpoint... now, the computer does not turn off


    Downloaded thinkpoint... now the computer does not turn off

    never had this problem before.


    Downloaded thinkpoint... now the computer does not turn off

    never had this problem before.

    ThinkPoint can be a virus, google for info also run superantispyware and av prog.

  • Computer does not turn off: encounter error on update Ms.

    It is a XP Pro laptop.  During the shutdown, while trying because of the updates, I get an error message "NDP1.1sp1 - KB2416447 - x 86 .exe has encountered a problem and had to close.  Computer then does not close.  How can I fix it?

    Remove the .net framework 1.1 Sp1 with .NET Framework Cleanup Tool :

    install .net Framework 1.1 Sp1 again and install the update again.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP -

  • Satellite PRO U300 does not turn off


    I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

    The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

    Some details of my pc are as under:

    Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
    BIOS Version V2.00
    Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

    Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
    Thank you



    I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

    Power on / off LED is probably what you mean (the other starting on the left).
    Anyway, you turn off your laptop using a standard on the Start button?
    Are you sure you want to use the Hibernate mode.

    Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

    Have you installed something 4 days ago? Or deleted some important application?
    Sorry, but it is not easy to say with certainty what the problem is here.

  • HP Pavilion 15 p150nh: laptop does not turn off completely


    I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
    Help me please!


    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    Kind regards

    DP - K

Maybe you are looking for

  • When I hit the back button to return to previous page...

    ... I get the dialog box: confirm: Firefox must send information that will repeat any action (for example, a search or order confirmation) that was carried out earlier. Return or cancel, is possible to disable this very annoying (for me anyway). I kn

  • iOS 9.3.1 phone turns off, but still has charge

    Snice updated to iOS 9.3.1 yesterday my phone shuts off when it should be about 30% charge left. It's as if the battery is dead and it won't turn back on to save if connected to the charger. Once plugged into the charger it lights up and shows charge

  • Replacing the HARD drive in conditions of international interest?

    I bought my laptop in Australia on Feb 12 and took home with me to Indonesia in June. It worked perfectly for me and even if I didn't have to worry about anything for many years to come. Until there are 2 Sunday, when Windows popped up a message sayi

  • Toshiba 42VL863 and DLNA - disconnect after 30 minutes

    I have the television on the cable network with shielded cable category 7, gigabit lan on a switch, such as media servers, I have a Qnap TS-509 with DLNA, all connected devices (tablets, PC and other devices) reproduce the video stream without proble

  • recipient audit and other content in DropBox

    Original title: recipient audit and other content Having set up a folder DropBox with unique addressees can you then check and know who is in the list of recipients. ?? Is it possible to have sent a file to, and then to add to the list of recipients