My computer jumps out of the window active and videos full screen, (youtube/movies on computer)

Similar Questions

• Windows XP Professional said that he has failed the Windows Genuine Advantage test. But I called the Windows Activation and the officer confirmed that my product key is genuine. How can I make Windows genuine?

  I recently bought a copy of Windows XP Professional. I installed and activated Windows XP while I had an Internet connection. This went well. I then download Microsoft Security Essentials, who then informed me that my copy of Windows is maybe not authentic. Confused, I downloaded the WGA tool, who confirmed that my Windows XP was not authentic.

  The Microsoft product activation call and reading my product to a CSR key, he confirmed that the key was official and I have to contact Technical Support. But Tech Support costs a bit of money, and I'm only 15 years to be honest (Yes, I have a bit of technical knowledge).
  My question is this: is it possible that I can make genuine Windows? This problem is getting boring now. I tried to reinstall Windows XP and re - enter the product key (I tried an online activation and a phone).
  Thanks in advance.

  Hello

  I suggest you to see link below and check if it helps.

  Windows Genuine Advantage does not validate a copy of Windows XP: http://support.microsoft.com/kb/916247

  If your Windows is not genuine, you should go to validate your windows.  Go to this site and follow these steps:

  http://www.microsoft.com/genuine/validate/ValidateNow.aspx?

  If you are having problems posting, follow the steps described in this site:

  http://www.microsoft.com/genuine/selfhelp/ServiceRequest.aspx?

  Hope this information is useful.

• After you reset the Windows Activation within 30 days what happened then? Reset the Windows Activation again?

  Original title:
  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you
  -----

  After reset Windows Activation within 30 days, what happened then? Reset the Windows Activation again? PLSS, answer to my question, I don't know what happened after windows activation for 30 days... Thank you

  Activate Windows.

  Once actually activate you Windows with a product key legitimate - you should be * fact *.

• resizing the window active to see bottom of page

  I chose the wreck more than the monitor recommends, and have updated the drivers for the graphics card and monitor. I played with the "active title bar" without any solution to this problem, I can not hide my taskbar using the up/down arrows with my mouse.

  Appreciate any info,

  Kind regards

  Millard

  Which particular program window? all program windows? even in maximized windows?

  1. try to resize the window by dragging the top edge of the window down, and then drag the window to the top.

  2 or attempt to open at least two windows, do a right click on the taskbar, on the shortcut menu that appears, click on "Cascade Windows", "Show Windows stacked" or "Show Windows Side by Side". If it will work, you will see small windows, then you can drag the edges of the active window to fill the screen.

  3 Alternatively, click the active window on the taskbar, click on 'Move', and then use the "Up" arrow key to move the window to the right. The first step on the arrow that the window will be locked to your mouse cursor, you can use the mouse to move the window, and then left-click on the desired position, simply use the arrow at the start key.

  3. to hide the bar tasks, right-click on the taskbar, click Properties, on the bar tab tasks, click to check the box in front of "Auto-hide the taskbar".

  I hope I could help

• What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  Original title: Windows Fax and Scan

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer.    And a telephone line.

• I received a call Thursday last of someone who said they were by the Windows team and that my computer has been altered. Is it a scam?

  The call was clearly from abroad and had a bad connection.

  I received a call Thursday last of someone who said they were by the Windows team and that my computer has been altered.   The call was clearly from abroad and had a bad connection.  Basically, they wanted to sell me something for $99.  Is it a scam?  Called again today and they make me nervous because I don't know that much about computers.

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• What is the Panel to learn under the Windows Menu and why is grayed out mine?

  What is the Panel to learn under the Windows Menu and why is mine dimmed in Adobe Illustrator?

  [Ask the right help forum... Left non-technical Forum Lounge for forum specific program... MOD]

  It is still at the experimental stage, as far as I know. It contained tutorial, so it provides a file HAVE, as appropriate, and step by step instructions. I wouldn't assume that it contained for the functions of learning.

  You will need to

  -be in the English language setting

  -have your status as a beginner (which could have other consequences on the content of the emails you get from marketing people)

  But still could not have because of the experimental status of it.

  If you want instructions step by step as the Panel offer you could get there faster with this: CC Illustrator tutorials | Learn how to use Illustrator CC

  I guess (I have not the Panel either) that are identical or at least very similar tutorials and instructions.

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Tried most methods still Cant turn on the windows firewall and windows defender

  k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help

  Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help

  An Antivirus is a fundamental need for security to prevent malware being installed.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For an Antivirus, install one of these free AVs (installation more than it will cause problems).

  And first of all remove any AVs expired may still have installed:

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Avast Antivirus:

  http://www.avast.com/free-antivirus-download#TAB4

  See you soon.

• The Windows Help and Support window appears without reason

  original title: THE HELP AND SUPPORT WINDOWS

  How can I prevent the Windows Help and Support window popping up? My laptop came back from en Acer wh that the keyboard had to be replaced from this window opens at random. When I close it and pop back up again. This happens several times before it stops.

  Hello

  You can try methods below and check if it helps:

  Method 1:

  You can try to perform the clean boot and check if the problem still persists to see how to perform the clean boot, click the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 2:

  I also suggest you to run a scan antivirus online free from Microsoft Web site.

  one) to scan online for any virus threats

  Click: http://onecare.live.com/site/en-us/default.htm

  (b) click on "Security Scanner" and select "full analysis of the Service.

  You can download free antivirus Microsoft Microsoft Security Essential . Click on the link to download Microsoft security essentials: http://www.microsoft.com/security_essentials/

   

  Hope this helps,

• Opens the window "view and track your downloads" instead of the program

  Each program (with the .exe extension), I try to open goes directly to the window 'view and follow your downloads. Even Notepad is present it is impossible to apply the patch that I found online. It started after trying to download an update to PhotoShop CS so I can open RAW files.

  Hello

  The problem is specific to just the .exe files?

  I suggest you refer to the following methods.

  Method 1:

  Read the following article.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2:

  Run a scan antivirus on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 3:

  Create a new user account and check account number.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  I hope this helps.

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  Have what troubleshooting you done?  Surely you have tried something before posting here, Yes?

  Hold power and home until is buttons restarts.

• Problem with the window "Variables and stack calls ': Options / interpret as

  Hello NO,.

  I found a way to run the JIT-debugger LabWindows/CVI on ICB itself...

  This is the procedure:

  1. I put a breakpoint, run the code, and the breakpoint, I opened the window "Variables and stack calls" by right clicking on a variable and selecting 'Display Variable View.
  2. Any variable shown, I right click and choose Options / interpret as

  You're right, I could now reproduce as well. It seems as if the presence of a function pointer, if set or not, causes interpret as shatter the debugger. The ADE does not seem to be affected, but you will probably have to restart your debugging session when this happens.

  I created the bug report 425151.

  I really appreciate the time spent in this narrowing for me. Thank you!

  Luis