My computer keeps going offline when I close.

Similar Questions

• HP2540 keeps going offline

  Brand new [1 week] printer 2540, at startup, it goes well, [although noisy] However when not used for a while [> 1 hour] it keeps going offline, it's just across the Hall from the router and the computer, that happens every day, power light looks dull and not brilliant, I reinstalled the software I used the hp without result installation software,

  using windows 8.1 64-bit with all updates installed.

  annoying to have to keep getting up to the toggle each time, always in warranty period, might as well go back to the seller.

  John

  Thanks a lot, I'll work my way through these and report

  John

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• My MX430 keeps going offline and will not print

  My MX430 is set up for wireless printing and keeps going offline and will not print.  I reinstalled the software several times, and it continues to be.  This is my only printer and is defined as the default value.

  Hello sallyb.

  Printer offline may indicate that the printer driver is not configured correctly.  Please, try the following to resolve the problem:

  1. click on start.

  2. click on Control Panel.

  3. click on hardware and sound.

  4. click on devices and printers.

  5 right-click the MX430 printer, and then click printer properties.

  6. click on the Ports tab.

  7. make sure that the check mark is on the port that begins with CNBJNP, then click OK and try printing.

  If the port CNBJNP was already selected if please try right click on the MX430 printer and click on see what printing.  When the queue opens, click on the printer and uncheck on use printer offline by clicking on it, then try to print again.

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer keeps freezing. When I restart, it checks for consistency.

  original title: computer keeps freezing. When I restart, it checks for consistency. who is wrong?

  my computer keeps freezing all the time. When I turn it off and turn it back on I get tell screen

  audit system C type NTFS file system for consistency

  CHKDSK checking files and index

  She then removes and retrieves a number of files. also every now and them my computer just stops saying its to protect my computer.

  can someone help and tell me what is the problem and how can I solve this problem?

  Here is the correct information on how to set your computer to another date and time.

  The other poster told you how to make a backup of files!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer keeps going into power saving mode

  Hello, I'm fighting with my pc it keeps going on the power saving mode how to stop what I sometimes lose my job

  Original title: URGENT
  Moved from the community involvement Center

  Disable saving energy mode in Windows 10

  1. Click Start
  2. Type power and press ENTER to open it
  3. In Option of power--> the window on the right panel under ' choose or customize a power pan "selected Plan is a balanced.
  4. Then click on change plan settings
  5. 
  6. This will open the Edit plan setting window
  7. To turn off the screen FOREVER in both batteries & Plugged In
  8. Make sure you put the computer to sleep FOREVER in both batteries & Plugged In
  9. 
  10. Then click on save changes
  11. This will save it, and you're done!

  Note:

  1. Battery: It will accordingly when the system is on battery Mode (load is not Plugged)

  2. Plugged in: Will accordingly when the system is Plugged In to the wall (the charger is plugged in)

• Computer keeps going all of a sudden "hibernation" mode

  I read a related thread that was close to my problem, but it wasn't quite the same thing.

  Now, when I close the lid, my computer goes into hibernation.  This is what I expect and want.  When I open it up, it asks for a password and goes back to the desktop or where I was.  Fine.

  This has recently started to happen:

  I'm going to work - even in the middle of typing an e-mail - and the screen will suddenly black.  I have to hold the power switch for a second or two (but not quite a long time to do a reset) to get the password screen.  I go, press the arrow, and it refers directly to what I was doing - even in the middle of a Word.

  What is probably happening, and can I fix?

  Some laptops will Hibernate suddenly without warning when they are overheated. Are your fans clean?

  I think so.  I use my laptop on the top one of these bases, which has two fans.  I think that I'm here.

• HP Photosmart C4780: Photosmart printer keeps going offline

  HP Photosmart C4780 randomly disconnects.  I connect the printer cable to my Macbook Air running OS X Mavericks. (It allows to print wirelessly, but I had so much trouble now 'online' I dropped and now just plug in when I need to print.) Printer will connect and print for months in a row, then all of a sudden he's going 'offline' and I can't do online. I restarted the laptop and printer but did not help.  Why he continue offline... and how I get it online? THX

  THX... printer works again.

• C7180 HP printer goes offline when it is connected with the wireless network

  Hello

  I have a problem which seems to be common, but I can't find a solution simple 'step by step'.  So my apologies in advance for you who are technically much more advanced that I am and know that this has already been answered.

  I have a sony vaio laptop running Windows 7.  At home, I have a printer all-in-one HP C7180 I connected wireless on my home network.  FYI, I have a netgear wireless router.

  Once I have installed the printer on the network, everything works fine until I closed my computer.  On restarting, the printer is detected as offline by my laptop.  Now, my solution is to uninstall the printer and reinstall it.

  If someone would be kind enough to give a detailed set of step by step instructions on how to solve this problem, it would be much appreciated.  I read on the definition of a static IP address rather than dynamic, but I would need one together instructions if this is indeed the way to go.

  Thank you.

  Rich - desperate to finally solve this nuisance.

  Hi rich,

  As you mentioned that the printer goes offline after a reboot, please refer to:

  "Printer is off-line" Message appears on the computer and the HP printer does not print

• Time Machine keeps going offline

  My time machine goes offline intermittently, that is, the green light turns orange.   Fix this by the turning on and off the camera, but nobody knows what can cause this and how to prevent it?   I have an iMac using OS X Yosemite v 10.10.5.

  Robbo

  Hi Robbo

  I had a similar problem.

  My Time Capsule had been working perfectly until I updated to the latest firmware (7.6.7) a few weeks ago.  Since then, I have had intermittent WiFi dropouts school but cable systems were not affected.  What firmware version do you use?

  Barry

• Printer keeps going offline

  Hello, I have a HP Office Jet Pro 8500 A910, my laptop is connected wireless.  It is the 3rd time in as many weeks that I tried to print and have discovered that my printer is "offline".  I don't remember what I did the previous time except deleted printer solutions and some other info that I found that has worked.  Can someone help me and tell me why this keeps happening and to prevent it from happening soon?  I'm always 'offline' and trying to find a solution.  Thank you.

  I thought about it with your help.  I noticed my printer to another IP address which was very similar to mine.  I still don't know why he keeps go offline, however.  Thank you to point me in the right direction.

• External screen goes blank when I close the lid Satellite P100

  Hi all.
  I hope someone has an idea as to what is happening here.

  Sometimes I like to watch a dvd or use the center of the media on my HD TV. I use Windows Vista to make it.

  When I had XP installed, I close the lid of the laptop and watch them to my heart's content. Now with Vista, I need to have the lid open be able to watch on the external display. If I close to you then the external screen is empty, as if I unplugged the laptop.

  That makes me free! What worries me is burn-in screen, because the standby screen not turn on as I am watching video.

  Help! Someone! Anyone!

  AFAIK in Vista that you can use the same options as under WXp. check please supply option and you will find an option called when I close the lid. As option, choose no action.

  I think you should be able to close the lid while watching the movie on screen.

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.

• computer keeps going in lock mode

  I use my computer, let it idel or plays a video and it goes into the lock. Stop everything and as I click it and it opens upward. I didn't change anything and it started yesterday. Any help would be appreciated. Its so annoying when it keeps it.

  Thank you

  Gloria

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner