My computer p6.2014 with computer controlled amateur radio compatibility

I am trying to determine if my pavilion p6-2014 computer supports a software radio amateur, 3000 Flex.

The requirements are on this link http://kc.flexradio.com/KnowledgebaseArticle50063.aspx.  I know that I need a pci firewire card, but are there other gaps?  I would appreciate if anyone has the time to study this

Thank you

Ellis

Here are the specifications of your desktop HP Pavilion p6-2014. According to the specification, this model has the following equipment;

AMD A6 - 3600 APU (CPU + GPU) / 2.1GHz / 4 cores
AMD Radeon HD 6530d on APU A6-3600
8 GB OF RAM DDR3-1333 (PC3-10600)
1 TB 7200 RPM SATA2 hard drive

The specs looks good overall and meet the minimum requirements for software-defined radio of 3000 Flex. The computer should support the SDR Flex without problem, but you may be better served by a real CPU, discrete graphics card that exceed the requirements.

If you have any other questions, feel free to ask.

Please click the White Star of KUDOS to show your appreciation

Tags: HP Desktops

Similar Questions

  • I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

    Windows 7 64 bit
    I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

    Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

  • I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

    I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

    Hi MAMARDA,

    Welcome to the Microsoft Vista answers Forum!

    I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

    (a) what version of Windows 7 use you?

    (b) what is the exact error message you are getting?

    Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

    Scan SFC enforcement procedure:

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11. once the scan is finished, close the command prompt window, restart the computer and check.

    Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

    4. click on finish

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    For more information, please follow the below given link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212/

    Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

    For a safe boot, you can follow the below given steps:

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    2. do one of the following:

    a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

    Hope the helps of information.
    Please post back and we do know.

    Concerning
    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I set up Gmail access with parental controls?

    I want my son to be able to access his account Gmail school and Google allow to complete the tasks for the school, but I can't seem to make it work with Parental controls.  Help, please!  (Preferably using Firefox.)

    Snow Leopard work well with GMAIL or Google might lead, if the computer in your signature is able to run the latest operating systems.  Before upgrading, read this tip

    Upgrading to 10.7 and don't forget Rosetta!

    Review the settings POP or IMAP for GMAIL if it's available as those who will work with the Apple Snow Leopard mail application.

  • Redirected page 'Protect your kids with parental controls' when you try to sign in to Family Safety

    I'm able to access my security account for the family to manage the accounts of my children.  I keep getting redirected to the page of 'your kids with parental controls Protection. "  What happened, and what should I do about it?

    I've updated the customer on my son's computer.  After that, I was able to log on the website of the parental control without problem.

  • An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

    Title:C:\Windows\System32\ALSNDMGR. Original CPL.

    Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

    C:\WINDOWS\system32\ALSNDMGR.cpl.

    Can I re-enstall or the download file?

    Hello
     
     
    1. Once you get the error message?
    2. What is the card its installed on the computer? E.g. Realtek
    3. do you have a cleaning registry registry booster software installed on the computer or third party?
    4. are you able to play sounds on the computer?
    5. have you done any software or hardware changes on your computer before this problem?
     
    Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.
     
    If you have the card Realtek sound on your computer, try the following steps
     
    Method 1:
     
     
    If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

    Reference:
     

    How to manage devices in Windows XP

     
    See also:
    Method 2:
     
    You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

    http://www.Realtek.com.tw/

     
     
    Hope the information is useful.

    Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

  • NO HTTPS sites permitted with Parental controls

    sites Web HTTPS NOT permitted with Parental controls - how one does this? Thank you.

    Hi MoellDa,

    I hope you do well.

    The of Windows Parental control allows a parent configure, on a per user basis, various restrictions on what the user can do on the computer. These range from Web sites block settings to control what are the games they play. Access to these types of controls allows a parent to feel uncomfortable with their children using a computer and at the same time gives them the flexibility to customize these settings for their specific needs.
     
    Sites Web https will be blocked or disabled if Parental control is activated.

    In order to customize Vista's Parental control, you need to log on to your computer by using an account that is administrator. Once you login, please see the links for steps and details below:

    http://windowshelp.Microsoft.com/Windows/en-us/help/585539d0-0862-41E4-9b39-53467648efc51033.mspx

    http://windowshelp.Microsoft.com/Windows/en-us/help/4d15df29-7891-4f1F-B674-5f0d1ec123991033.mspx#E2

    I hope this helps.

    Thank you.

  • ESX Server with a control VM, instead of the workstation

    Considering change of ESX Server to increase the memory available to my VM that is connected to the internet.  But I've been advised what ESX a second pc needs to combat it.  So it's no good in replacement of the workstation or player.

    Why can't a virtual machine with the guest only network use the computer controlling in ESX, playing the role of external control computer?

    If it is declared with a raw disk, it can even have full access on the host drive. You can then install vmware workstation virtual machine to edit .vmx via the user interface files, generate new hard or copy - pasting entire VM.

    And when you have need of more memory, you suspend this VM control and almost all memory is available for the computer connected to the internet virtual.

    Why not?

    ESX is a pretty primitive operating system - it can even display a beautiful picture because it has only a text console.

    Because it is so limited and restricted compared with other operating systems, it's so good to run virtual machines without GUI.

    The disadvantage of this design is that you need a second machine to display a virtual computer desk

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

    How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

    Pure how to install OSX on a Fusion drive and keep the recovery disc function

    These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

    These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

    WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

    This is the target disk partitions, and the configuration that we want to achieve.

    Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

    Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

    There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

    Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage GB LVG 121.0 disk0s2

    3: disk0s3 Apple_Boot Boot OS X 134,2 MB

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: disk1s2 Apple_CoreStorage TB 3.0 LVG

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    / dev/disk2 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh HD + 3.1 TB disk2

    Logical volume on disk0s2, disk1s2

    0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

    Fusion unencrypted drive

    Here's how we do it.

    • A. clean reinstallation of Mac OS x.
    • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
    • 2. create the OSX install USB, insert it to the MAC workstation.
    • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
    • 4. in the menu at the top of the screen, select disk utilities.
    • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
    • 6. If his success, then go ahead to install OSX new to that partition, as usual.
    • 7. otherwise, if it does not, that means fusion drive has been damaged.
    • 8 follow the instructions below to fix it.
    • . B. Split disc Fusion in the physical hard disks
    • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
    • 2. in the menu at the top of the screen, select utilities and Terminal.
    • 3. on the screen of the terminal type:
    • Cs diskutil list.
    • You will see something similar to the screen below.
    • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
    • diskutil deletevolume cs UUID
    • For example:
    • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
    • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
    • diskutil cs remove UUID
    • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
    • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
    • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
    • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
    • cat/etc/random >/dev/disk0
    • cat/etc/random >/dev/disk1
    • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
    • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
    • 2 do the same with the mechanical hard drive.
    • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
    • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
    • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
    • 6. we must now test if the recovery hard drive partition works.
    • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
    • 8. it is important to test and make sure that the partition of hard drive recovery.
    • D. recreate the fusion drive
    • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
    • 2. in the menu at the top of the screen, select utilities and Terminal.
    • 3
    . on the screen of the terminal type:
  • diskutil list.
  • You should find that we have a list of disk group hard physical volume only, no logic here still.
  • 4. you will see something similar to the screen below.
  • 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
  • 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
  • 7
  • . Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
  • The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
  • For example:
  • diskutil cs create fusiondrive disk0s2 disk1s2
  • diskutil - the version of disk utility command line.
    cs - This calls for Core Storage, which is necessary for the merger.
    create - creates a basic storage group.
    nom_lecteur - is the name of the drive and how you want that he
  • appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

  • driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
  • It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
  • 8. you will see something like below appear on the screen:
  • Creation Volume logical storage of kernel
  • Move isk0s2 storage of carrots
  • Disk1s2 of switching for the storage of carrots
  • Waiting for logical volume group appear
  • Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
  • Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
  • Finished CoreStorage operation
  • 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
  • 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
  • In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
  • For example:
  • Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
  • diskutil - once again, this is the version of disk utility command line.
  • cs - called the basic storage functions, which are necessary for this arrangement.
  • createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
  • groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
  • jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
  • VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
  • size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
  • 11. go to diskutil to verify that you can see this new partition on the list.
  • 12. test by erasing all the data from it.
  • 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
  • 14. This will allow you to keep the recovery disk feature.
  • X. how Prime to recover partition
  • Press and hold the command and button R set immediately after hearing the bells to boot.
  • Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
  • Y. how-to boot OSX install USB
  • Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
  • Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.
  • iPhone 6s 9.3.2 bluetooth doesn't always work only not with the control system of Mercedes

    Connection Bluetooth iPhone 6s with Mercedes control system does not work with version 9.3.2.

    (Last worked with 9.3).

    Hello..

    On your iPhone, tap settings > general > reset > reset all settings , and then restart your iPhone and then try Bluetooth with the control system of Mercedes.

    * No data is lost due to reset

  • I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

    I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

    Well, if you need older versions of firefox you can find them on this site:
    - http://www.oldapps.com/firefox.php

    Best regards, G-Cloud.

  • Satellite A300-1MS - I want a new BIOS with fan control

    Satellite A300 - 1 ms PSAG8E

    New BIOS with fan control, please.
    Thank you.

    Why Toshiba should make a new BIOS just for you?
    You have a problem with the fan?

    I put t know what OS you use, but you can change the method of cooling with Toshiba Power Saver. On both my Toshiba notebook, I use this tool and I like it.
    You can download the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Problems with the help of control Edit Expression with tab control

    Hi all

    I am facing a strange problem when using Expression Edit Control with a tab control.

    When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

    I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

    I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

    Thanks a ton in advance!

    DASI

    PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!


  • LabVIEW with version control

    Hello

    I'm using LabVIEW with version control and only want to check the VI I need to change. If I changed a Subvi all screws directly or indrectly called this VI have recompiled and in order to save them, I need to check all screws are concerned. If I just extract the file, I need to change and to ignore the other screw recompiled the problem is if I use typedef ENUM and I want to still only got saved the VI automatically updated. Everyone runs on this problem?

    Thanks for the help!

    Kind regards

    Tom

    Tom,

    You can find what you need here: http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/saving_vis_compiled_code/

    Good luck

    Simon

  • Adding an extra person for the weekly report of MS with parental control

    I currently get activity weekly email report of MS for my two children with parental control.

    My wife does not have an account of MS, but I would like to add to this distribution of weekly e-mail.  How can I make for my wife also receives the report of MS weekly activity with parental controls?
    Thank you

    Hi TomMinasian,

    Thanks for posting back. What I understand about your last post, it seems that you received the error message when a Microsoft account is created for your wife, is this correct? Have you encountered the error message after clicking on I agree in this link?

    We look forward to your response.

    Kind regards.

Maybe you are looking for

  • How can you transfer photos from external memory card to internal memory frame kodak easyshare ex811?

    Need to transfer photos from an external memory card to memory internal under photo Kodak EX811?  Surely it can be done?

  • Send "multiple" documents photos

    LARGE number of photos in the form of documents & I want to send them in an e-mail. Is this possible?  I am researching a little and think I need tocompress into one file. Looks like I can do a right-click on the doc, send it to the office and put it

  • Driver IRQL NOT LESS or EQUAL blue screen (d1)

    I got a blue screen for a while. I tried the solutions on the page to "Solve the blue screen errors", but they did not work. Here's my DMP files: https://www.mediafire.com/folder/ref1h2243hvxr0y, sqj4vqx760qxpc5/shared Thanks in advance for the answe

  • Mixed versions of ESXi cluster

    We started a project driver Nvidia GRID with our VDI. We have a cluster of three servers with two IBM x 3650 M3 and M4 3650 x. After having modernized our VDI and vCenter to 6.0 u1, we discovered that servers M3 had fallen out of the 6.0 compatibilit

  • Combine two files in the auto updates

    Does anyone know if there is a way to combine a word file and a scanned in pdf format, while keeping the word as the author document. Which means that if I updated the combined pdf file word doc would automatcially update. The word document is stored