My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that
My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8. Do a Startup Repair: Auto repair - run in Windows 8 - Windows 8 Forums Let us know if it is not resolved Tags: Windows Greetings, I installed updates in my Windows 8.1 partition. Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours. I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered. I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5 How can I fix this without wiping the Windows partition and lose my software? Thank you! Have you created a Windows system restore point before the upgrade? Problem: See: http://support2.microsoft.com/kb/949358/en-us (run a system restore) Perform the system restore from the recovery of Windows and check. (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any. (b) select the correct time and type keyboard. (c) click on repair your computer in the lower left corner. (d) select Troubleshooting in choose an option screen. (e) click Advanced options in the form of resolution of the problems. (f) select System Restore. Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program. Reference link: How to refresh, reset or restore your PC. If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer. You can also refer to: How to create the installation media for a PC refresh or reset: Visa update problem After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer. I tried to follow the instructions provided here because it seemed to be the same problem. But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode. Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '. I can't get out of this cycle. I installed the update because it said I needed to install it. ************************************************************************************************************************************************* Theresa Hello the link below is how to download and get a vista disk startup repair, which you can start from the http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/ Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below http://www.bleepingcomputer.com/tutorials/tutorial148.html to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu Change boot order it do dvd drive 1st in the boot order Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast. When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours. I wonder how can I fix? I tried it turn on and turn off, but the same problem persists. It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop Any solution please? Thank you Hello I'll get you the link and restore your computer to a previous working state. http://support.Microsoft.com/kb/949358/en-us Please reply with the status. Hello Hello Default windows setup updates returning changes do not turn off your computer Kindly help me because I'm having this problem default configuration of the windows updates reverting changes do not turn off your computer. It may take a long time before he return to normal. I use windows 8. Assistance is very welcome. Thank you Please run the Windows Update Troubleshooter: Please provide details of any problem it reports as not fixed. Also messages follow: "updates not configured correctly. Returning changes - do not turn off your computer. » Take a look at this article to see if it helps to solve your problem: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows Default configuration Windows update restore changes do not turn off your computer. I'm running 64-bit Windows 8 Guard saying default configuration of folds by using Windows Update Hi Cris, Thanks for posting your query in Microsoft Community. You did it any significant hardware or change software on the computer before this problem? I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem. First place, according to the error message, I suggest you to try the steps in the following article and check if it helps. Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed. The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists. Method 1: Try to run that Windows update utility provided in the following link. Problems with installing updates Try to install the updates after running the troubleshooter. If the problem persists, try the following method. Method 2: I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors. (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow. (b) type the following commands. Press enter after each command (c) close the command prompt, and then run Windows Update again. Check if the problem persists. Hope this information is useful. Let us know if you need more help, we will be happy to help you. Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER" Respected by all, Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update. If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard. Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally. I, too have this problem, however, it's on my new Lenovo Thinkpad 2 and the endless loop is going for 4 1/2 hours. I'm crazy! I only had it for 4 days. Can someone please help? Hello Welcome to the Microsoft community. I understand that you are unable to install the Windows updates and receive an error message. This must be due to the corrupted Windows Components update or conflict between third-party applications or external devices. I suggest you perform the steps below in the Microsoft Help article: "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates http://support.Microsoft.com/kb/949358/en-us Note: 1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. 2. Please do not perform upgrade in-place or reinstalling Windows. 3. after the boot minimum troubleshooting step, read the sections "How to reset the computer to start normally after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode. Hope that it can solve the problem. If the problem persists, please answer us, we will be happy to help you. Thank you. When I turn on my laptop this message "updates were not correctly configured. Restoration of the changes. Don not turn off computer. "Have not been able to go beyond that? Any help will be appreciated. Hello Windows-configuration updates step 3 0f 3 - do not turn off your computer Help please before you take a hammer to the laptop. The update seems to be in a loop and for 3 days I wasn't able to stop or delete it. I turned off, left running for hours on end and tried everything I can think of. How can I erase this. I'm not very good with computers, so maybe it's a simple answer then excuses. MB some suggestions in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-configuring-updates-stage-3-of-3-0/18b07caf-8749-4834-955c-78e7cd211146 This is a computer that is less than four months old. It works very well - install updates and shut down. Now I get the same message, but it seems closed - the morning I get the message yet configuration and never completes the process. What is the problem. I called the store where I bought the computer and they tried to tell me to Geek Squad, it's something I have to pay for. I got a service contract, but he says it's to my hard drive, or anyone, that it is not covered. Is there a fix I can do myself. From what I've read it's not like this is an unusual problem. Is this correct? mlpotast, Although you will see a message at the top of the page that article applies to 'use a different edition of Windows than the one you', he applies to Windows 7, then download andSave the Fixit, please -How to reset the Windows Update components? Then, read How to configure Windows 7 to the clean boot. With the system connected to the internet, run MicrosoftFixit50202.msi and choose the default mode. Open Windows Update in Control Panel. Run a check for updates now. MowGreen Services update - consumer safety my laptop is s200e asus PC with the built in language unique window 8. My problem is when I wan upgrade to 8.1 of the shop window, it say I need to update the update of the window. but the problem occurs when I updated, and then "failure of Windows updates. Restoration of the changes. Do not turn off your computer. » but the return is seem endless, coz I wait for a whole day... .but it will be not just finish. I can do nothing but reset it back to the factory. I can't update 8.1 store window without updating the window. You do not add features to upgrade 8 > 8.1 That's the Pro and Media Center that do not need another product key and that are no longer available. And the creation of media for 8.1 works; I just checked it a minute ago. See you soon. Search the Web for awesome bar I cannot search the Web awesome bar, will return to my internet service provider page. Mini iPad can't drag or enter the access code My mini is broken, but I want to restore it. Is it possible to do this when it will not allow a slide or a password? Sony Xperia Tablet S has the space between the screen and back Hey,. I just discovered that the space between my front and back is! I checked out the site to see if it was one of the tablets known with the question, but it wasn't. Although he did not share the same problem as the Xperia which have been requested DVD - CD Microsoft Fix - it give me an error code 0 x 80040154 I can do a backup with my WD external drive but I can't do a backup with a DVD. I can read DVD and CD, DVD - CD Microsft Fifix - it gives me and error code 0 x 80040154 "Allow a device to plug" is grayed out, bluetooth I am unable to connect any device to the laptop via bluetooth, even if I used the service before. When I turn on the bluetooth and right-click on bluetooth icon - "authorize a device to plug"is grayed out'. I use Windows 7, 64 bit. Any suggestions...Similar Questions
http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
Microsoft Answers Support Engineer
Download it from this link.
I suggest you to try the steps in the following Microsoft article and check if this may help.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7:
http://support.Microsoft.com/kb/949358
NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native Windows 7 firewall is now on.
Restart the system once the Fixit ended.
If the system can search for and detect the necessary updated now, Cancel the Clean boot steps and see if the system can search, detect, download and install the necessary updates now.Maybe you are looking for