My computer says webcam not detected

Similar Questions

• DELL INSPIRON N4010... SAYS WEBCAM NOT INSTALLED... INTERGRATED

  try video calling friends I can hear them but can not see... Herald says webcam not detected.

  Hello
   

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  I suggest you to check if the drivers are installed. To follow then the steps to make sure that the device is detected and drivers are installed properly.
   
   Step 1:
  Uninstall the device from Device Manager, and then install the device by downloading the driver as mentioned in step 2.
  To uninstall a device by using Device Manager, follow these steps:
  1. click on start, type devmgmt.msc in the start search box, press ENTER.
  2. check if you can find Webcam in device manager, click with the right button on the dongle device and click on uninstall.
  3. once the uninstall is complete, restart the computer and try to install such drivers as mentioned in step 2.
   
  Step 2:
  Try to download from the following link webcam central software and install it.
  http://ftp.us.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe
   
  You can check the link for additional assistance update drivers:
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  If you have any other questions, feel free to answer that we would be happy to help you.

• O2 dongle is never to step of the password and then just says device not detected / found

  Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

  Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

  Hello

  You can try to reinstall the USB controllers and check.

  a. Click Start and type devmgmt.msc and then click OK.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the device to see if it works.

  You can also consult the following link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is helpful

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Pavilion G7 webcam not detected.

  Hello, I have a G7-2051SA Pavilion on W7 64-bit and webcam does not work. I have the "Cyberlink Youcam" which, once the software is installed, I run, he "No webcam detected". Skype does not detect it either. I've updated the latest drivers and using tune has conducted an audit and update PC with all relevant software but I still get the error. I can't see a FN + option key or any which icon on one of the 'f' keys to allow.

  Any ideas please?

  Hello jerrydoco.  I understand that you get the error "webcam not detected."

  Recently, I made a post on solutions for this error.  Please take a look here and try to proceed as I pointed out.

  I hope it's useful and I hope you have a nice day!

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

• Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  the imaging device is not on the list of the Device Manager... so I could not uninstall and reinstall the driver for the webcam.

  Help, please.

  Thank you.

  Hi NIKSY2K2,

  Please try to reinstall the Webcam Companion software by using the button help rebuild drivers for the camera.

  Nick-

• New Pavilion dv7, HP TrueVision HD webcam not detected

  Just bought my new Pavilion dv7, and when I run the Cam software, it tells me that my HP TrueVision HD webcam is not detected. I tried this for a few days, at a point when I was trying to play with the settings you Cam, webcam light on for aprox. 2 seconds and then died again, since then, it won't let me even in the settings of YouCam.

  Right now I am more and more convinced that it is because of my laptop being assembled outside the United States. Need a fix for it immediately.

  Hi guys,.

  I had the same problem with a HP Pavilion dv7-6e22b. I read on a short cable inside the screen.
  I found the post on the way in which the display is connected. It's an older model but I was curious to know how to remove the cover of the machine. It contains 2 screws (that I didn't have to remove to access the camera) just be causious does not break the bevel.

  http://www.insidemylaptop.com/remove-LCD-screen-inverter-Board-HP-Pavilion-dv7-notebook/

  It is an older model in the new model, the connector of the webcam is located directly under the lens of the webcam itself.
  I pressed connector you slightly. And suddenly I hear a USB all OFA linking sound. After that my device manager showed a "device-image", and the software work directly.

  I jump it will solve your problems. I say read all messages and do not find a solution to the driver or software and after seeing the connector, I think it's an effort of poor deisgn by using short cables and small connectors.

  good luck to all!

• When I try to use my webcam in my hp laptop it reads this "no webcam not detected, try plugging your webcam" I can't connect the webcam if it is installed. What should I do?

  It is the cyberlink youcam is not working. He said "no webcam detected, try plugging your webcam. If you use a camera to make sure that its on. "Also my microphone does not work.

  Hi Samson,.

  1. What is the model of the webcam number?
  2. did you make any changes to the computer before the show took place?

  Method 1
  I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest to update the drivers for the webcam and the microphone provided free of charge by manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information:
  See to believe
  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• computer says software not authentic, but it is? Microsoft must fix 4 product here free

  computer says not genuine software but says scan ok with only the drongle not recognized coz not microsoft for my software product is authentic one hasn't done WAT is supposed to make a must set by microsoft for free or refund the product that remains good step fail after sum time .this who should I do or download Microsoft fix problem they obviously caused.i will pay 4 it to fix as this is the default

  Please transfer your inquiry in the Windows XP Genuine Advantage Validation issues Forum.

  Thank you!

• CD player does not. Not changed anything on computer. says will not start error code 10.

  I have Windows vista on my computer. I tried to play a cd and burn also. The drive does not at all. The light comes on, it runs for a second or two and then stops. I checked the updates for the drive and there is not. It is coming up with an error code 10. States, it does not start. I tried to find a solution for this and found nothing. HELP PLEASE?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Reinstalled Windows Vista 32 bit on my 64-bit computer. Does not detect not NIC

  I was running a Windows 7 on a 64-bit computer. A Lenovo Thinkpad, due to some strange reason, that my computer has started to slow down and suspended. I ran all kinds of tests to see if it was a virus, but the computer is clean as a whistle.

  I decided to reinstall the operating system to see if it was a HARD drive problem or just software. I couldn't find my windows 7 ultimate DVD so I installed the Vista 32 bit and it works fine. The only problem that I face, it's that his does not detect does not the wireless network card. I went to control panel > Device Manager > network adapters and can't find LAN options.
  I'm sure that the wireless adapter exists because I used it for more than 6 months.
  Is there a way to fix this?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  It will be useful.

• Possible viruses have on Vista computer but does not detect anything with current Antivirus software

  When I opened my online banking Web page, I have a popup asking for personal information. Something like that on the note: "we are currently doing a security check, for your safety, please fill out the form below and we thank you for choosing Scotiabank.»

  and then a bunch of fields corresponding to what I have my Bank would normally know... ran several antivirus programs and does not detect anything...

  A ran a few different antivirus but nothing found...
  * original title - online services - Trojan?   Only using Firefox *.

  Hello

  Use this too

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.