Similar Questions

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  How can I stop Photoshop CS4 create a new layer each time I use the online tool?

  Whenever I use the online tool, a new layer is created. How can I stop this? No settings have been changed.
  
  Thanks in advance.

  Look at the three options in the top bar.

  

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Error message: device is ready for use, and after a few minutes the error message "hardware Id missing.

  Original title: hardware Id missing

  I recently acquired a voice recorder HccToo 8 GB. However, whenever I connect it to my computer I get a message saying that the device is ready to use and after a few minutes the error message "hardware Id missing.
  The usb cable that connects to the camera has no problem (and should be universal). And I tried to connect to other computers on win 7 with the same results. I also watched online solutions, but this problem seems to apply mainly to phones.

  I would be grateful for any advice on what I can do about it.

  Hi Nikolai,

  Sorry for the late reply.

  Did you try to connect other USB devices and check the issue?

  If problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything.

  original title: issues of computer game.

  Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything. What I can do, how can I fix?

  Assuming that your PC meets the requirements of the games you try and works well when in Windows (not), then try this.

  1. Start the Task Manager goto the tab, click "Show processes from all users".
  2. Run the game in a maximized window, see if the game lags then.
  3. If so, go to the Task Manager and check the CPU usage and the memory usage by clicking on their respective column headers to get as high in the upper part. Is anything hogging resources?
  4. Double control by checking the graphics CPU and memory on the tab.

  or

  Try to run a scan with Malwarebytes - just in case. Download, install, update (right click and run as Admin to update) and then run a full SCAN. It can't find anything either, but it does not take long and helps eliminate the possibility of malicious programs.

  or

  Are you drivers (esp GPU and sound card) to date?

• computer sits idle for a few minutes - screen is blank

  I HAVE WINDOWS 8. IF I LEAVE FOR A FEW MINUTES, THE SCREEN TURNS OFF, I HAVE TO CLICK THE MOUSE OR HIT THE CONTROL, OR THE WINDOW KEY

  TO GET BACK ON MY SCREEN. COMPUTER FUNCTIONS CANNOT BE USED UNTIL A MINUTE OR TWO. HOW CAN I FIX THIS?

  Change your standby or hibernation settings, but also the other parameters of power supply to your taste...

  Do you need information?

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all

  When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all, the homepage remains open, but the other page start for no reason at all in another tab

  It's very consistent, he arrives a few minutes? In this case, I suggest this test:

  To find out if one of your extensions is the culprit, could you test mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• Just update 4 LR LR 6, so I find lightroom does not not like before.  He becomes very slow to open, when I go to 'Library' to 'Develop' or import of images the Apple beach ball will roll for a few minutes.  My iMac uses OS X worm

  Just updated LR 4-6, so I find lightroom does not not like before. LR 6 is very slow at the start, whenever I pass 'Library' to 'Develop' or import images, the Apple beach ball will roll for a few minutes first. My iMac uses OS X version 10.10.5 are all these compatibility issues?  What should I do to make it work better the lightroom?

  Please take a look at the article and follow: https://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html