My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()
I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.
Do you have an antivirus installed? Otherwise download, update and scan with this
http://www.Microsoft.com/security_essentials/
Follow these steps
http://support.Microsoft.com/kb/929135
and this
- Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
Type the following command and press ENTER:
sfc/scannow
Tags: Windows
Similar Questions
-
Hi, I just realized my disk drive does not work, can anyone help
Hi, I just realized my disk drive does not work, I never use watch cd or dvd, now I am installing a norton internet security 2012 after that I put in the cd, there is no response, anyone, please
Hello
First, try the automated Microsoft fixit at the link below.
Check if the drive works now.
If the drive still does not work, open all programs, open accessories, right-click on command prompt and select "run as Administrator". In at the prompt, type the following command and press ENTER.
sfc/scannow (Note that there is a space between sfc and /)
Let the entire process, then the output type and press ENTER.
Then, click on the Start Menu, open Control Panel and click Device Manager. Click to open the CD/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers. When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar). Let windows reinstall the disc and see if it works now.
Kind regards
DP - K
-
I have recently reinstalled windows 7 Home premium from the disk after deleting the existing partition. During installation, I entered the key of product inside the box, but I get a message saying that this key cannot be used to activate wondows on this computer.
Any help please?Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!
Hello
Check with Toshiba support, online documentation and drivers (update or reinstall), and
ask in their forums.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp========================================
How to activate Audio devices hidden in Vista and Windows 7
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer (you want to be sure
the mic input is enabled)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer-----------------------------------------------------------------------------------------------------------------
Pilots may also need to be updated:
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
Audio (this is an example and you can have an other name/maker).Make sure you write down the description and model double click top - tab drivers - write version. Now
Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.If your driver shows 06 you have the default windows and part of the question.
Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
Put them - right click on Reboot - RUN AS ADMIN -.Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDI hope this helps.
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
I just bought the teachers edition and Creative Cloud student (one year) and I'm unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.
See if the following can help:
Creative Cloud applications unexpectedly back in the test mode. CS6, CCM
https://helpx.Adobe.com/Creative-Suite/KB/trial--1-launch.html
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Equium - dead after hibernation, the system recovery does not work
Hello
I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
I removed the battery and put back in place, without result.
Connection to an external monitor shows no results.
When I put the original CD recovery Toshiba, no results.So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.
Any help or ideas would be very appreciated! ;)
DanielHello
My laptop could not wake up after hibernation too but I managed to wake up again.
This;
Disconnect the power adapter and remove the battery.
Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP. -
Personal computer running Windows XP with two printers, HP Laser jet 1020 and Lexmark X 2250 works very well yesterday. Today, print jobs are back with the error signature telling me that my spool server does not work. I went and tried to restart my spooler, no go. Icons for missing print/fax printers program and I can not reinstall the printers. Same message arrives, spool server does not. How can I fix it. I ran the difficulty it program, produced works and still nothing. Help please!
Hi Wendy,.
It comes down at the end of the previous instructoins, so it of nothing to do but to remove and reinstall the printer, then follow these instructions to do this:
We will try to uninstall then reinstall the printer in a specific way:
1. remove the printer from the PC.
2 uninstall the printer from the PC driver.
3 reinstall the printer driver with the latest version of the Brother's Web site.
4 reinstall the printer.
Also, here are some references of printer:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
Let us know.
Best regards
Matthew_Ha
-
After that I upgraded 6.5 Skype integrated webcam does not work.
Original title: 6.5 Skype
I have computer laptop dell XPS 17 L702X when I update 6.5 Skype on-board webcam don't work when downgrade 6.3 Skype webcam embedded work? I try on Windows 7 and Windows 8
Hello
-You get an error while trying to access the webcam after installing Skype 6.5?
We can refer to this article and check if that helps.
6.5 Skype and the built-in webcam does not: http://community.skype.com/t5/Windows-desktop-client/Integrated-Laptop-Webcam-does-not-work-with-Skype-while-USB/td-p/1711452
If the problem persists, you can ask your question to the Skype community: http://community.skype.com/?category.id=English
Thank you.
-
My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!
Hello rad trp,.
Thank you for using communities Support from Apple!
From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.
I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.
Reset the management system (SCM) controller on your Mac - Apple Support
OS X Yosemite: reset PRAM your computer
See you soon!
-
I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael
Right click on 'My computer' / select 'manage '.
Under "Services and Applications", select 'Services '.
Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".
Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.
J W Stuart: http://www.pagestart.com
-
After installing the printer wireless Hp, my mobile Microsoft Wireless Mouse 1000 will not work. I'm running Vista 32 bit on HP Compac Presio. Have you tried various options such as uninstalling/reinstalling, running Microsoft Fix It that says changes to the hardware detected but it tell me how to solve this problem, and MFI does not generate a report for help. All USB ports working. Can someone help me?
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
-
My Acer 5745 laptop crashed, my backup boot drive does not work. The laptop was running Windows 7 when I bought new in November 2010. Y at - it somewhere that I can download a floppy or a recovery disc? 'The Source' store where I bought will not help, they said they had to go back to Acer and it could take up to two months to return to a charge of about $170.
Thanks for any help, someone might be able to give.
A laptop bought at that date will still be under warranty, there should be no costs involved, contact Acer technical support.
I guess by the backup startup disk, you mean the set of recovery disks you did when you first used the PC?
-
My laptop crashed and I started my laptop to another and installed Windows 7 above. I tried to activate with my old Windows 7 Ultimate key (which was on my dead computer) but it does not work. What should I do? Hope I didn't buy the new Windows 7 key.
Windows 7 Ultimate come preloaded on your old computer?
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxYou may need to consider investing in a new license if this is the case:
Windows 7 - version comparisons:
http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions
MS Windows 7 store price:
http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102
-
I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.
I bought a new hard drive, so I had to reinstall Windows.
After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.
In the Device Manager, I see that there is an exclamation to these exact components:
Standard VGA graphics card
BCM20702AO
Ethernet controller
Network controller
PCI device
PCI Simple Communications controller
SM Bus controller
Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.
I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)
Can someone tell me what to do? I'd appreciate any help. Thank you.
Hello:
Here are links to the drivers you need...
First, install the smbus controller driver and restart.
Then, install the graphics driver and restart.
Ethernet controller:
Network controller:
BCM20702AO:
Comms Simple PCI:
Dev PCI:
Maybe you are looking for
-
Firefox not rendering or display the graphics properly, tried everything?
Firefox not rendering or display the graphics properly.When a page loads first, fine, but if you click on a few buttons, then the back button to return to the page of the image is cut in half, or lack of parts of it, on the page what happens, if I de
-
Ehrecvr.exe.MUI corrupted in windows media center
The last two days my computer was unable to shut down properly. It will get to the screen that says it stops but then actually turn off and I have to press and hold the power button. I got some tips to scan a full record to see if all the programs we
-
How do I turn off Hotmail Messenger in Mac
Hotmail seems to have updated and for reasons beyond me decided to add the feature the most arrogant and annoying as possible. Whenever I check my mail I get disconnected (e) my regular MSN and that Hotmail connects. Very boring and rather intrusive
-
I recently got a new Ipod nano 6th generation. When I plug it only shows up as a USB device. It will not appear in Itunes or on 'my computer' I uninstalled Itunes and components and reinstalled them. I tried the 5 R on the device. and spent about 2 h
-
I'm now trying to understand about closed captioning in the photo library. When I add a legend I would expect that the legend would be in the picture, or just below the image, told me in my post on Movie Maker I could enter my captions in photo galle